Hello all,
Wondering if i could get some help installing the latest so it will work with the 3B+ model.
I get the following messages and Rune never starts.
I've attached an image of the screen. Any help is appreciated!!
Mike
by leardo » 08 Jul 2019, 04:52
by leardo » 08 Jul 2019, 04:56
by janui » 08 Jul 2019, 06:10
by leardo » 08 Jul 2019, 12:40
by janui » 08 Jul 2019, 15:40
No, it is enabled and wired ethernet should come up automatically. Very occasionally the initial boot process stalls, then a manual power off/on may be required. The initial boot can take up to 3 minutes, subsequent boots should take less than 30 seconds.leardo wrote:Is the standard DHCP on the ethernet connection disabled on the initial setup?
by leardo » 08 Jul 2019, 15:47
janui wrote:Hi leardo,No, it is enabled and wired ethernet should come up automatically. Very occasionally the initial boot process stalls, then a manual power off/on may be required. The initial boot can take up to 3 minutes, subsequent boots should take less than 30 seconds.leardo wrote:Is the standard DHCP on the ethernet connection disabled on the initial setup?
Depending on your client, one of the following should connect: http://runeaudio.local, http://runeaudio or http://runeaudio. (this last one has a '.' as the last character).
If you still have problems check the checksum of the download file and if that is OK recreate the Micro-SD card.
janui
support RuneAudio