Hi there,
Updated Rune arch7h image for Pi 2 and Pi 3 models - Linux version 4.9.63-1-ARCHThe purpose of this image is to provide a
temporary solution which supports new sound cards or USB DAC’s which require a recent kernel and to fix a couple of kernel related bugs.
This image is based on the RuneAudio_rpi2_rp3_0.4-beta_20160321_2GB.img - v0.3-beta (23/03/2016), the standard image from:
http://www.runeaudio.com/download/#raspberry-pi-3.
It is
not the Rune 0.4 version currently being developed with many new features, see here:
runeaudio-0-4-beta-for-raspberry-pi2-3-t4434.html#p19960.
The image will fit on a 4Gb Micro-SD card, the download version had been compressed with gzip.
You can download the image here: http://www.mediafire.com/file/88nzouvtt ... 3-1.img.gzSHA256 of the gzip version is:
- Code: Select all
76C17E2BCF9D3983D2617FBE8C3D3E04F5F4A5287AD23489A3A3622628F475EE
SHA256 of the unzipped image is:
- Code: Select all
7813C52E7498C2B3985E2EC04F258ACED9FC9877C6C23873FAF6307FE8BCCD06
You will need to edit the config.txt file within the image to configure it. This can be done in Windows with notepad after writing the image to your Micro-SD card.
This build has been tested on Pi B2 and B3 models. There is one known bug: Spotify will not start up properly. The solution is here:
spotify-on-rpi3-t6124-10.html#p24012The Addons from Rern have been tested with this image. They all seem to work and Rern’s MPD upgrade is pre-installed. Many thanks for the fine work from Rern.
• Changes:
o Previous build: ‘RuneAudio_rpi2_rp3_0.4-beta_20160321_2GB.img’
o New build: ‘RuneAudio_rpi2_rp3_0.4-beta_20171120_4GB_4.9.63-1.img’
• Full git pull carried out:
o Upgraded to the latest Dev version
• Upgraded MPD to 0.20.11 via Rern’s Addons:
o Included SoXr resampling engine
o Modified RuneOS to set up SoXr resampling, but not actually use it
o Midori installation fixed
o Fast MPD library (re)build
• Access Point added – this function is enabled with NAT:
o Packages haveged 1.9.1, hostapd 2.6-6 and dnsmasq 2.78-1 installed
o Files /etc/hostapd/hostapd.conf and /etc/dnsmasq.conf added, /var/www/command/refresh_nics modified
o User dnsmasq added to own the dnsmasq service
o To use Access Point:
SISID = RuneAudioAP
Passphrase = RuneAudio
UI connect URL (from browser): 192.168.5.1
o To disable Access Point login via SSH and execute the command:- Code: Select all
redis-cli hset AccessPoint enabled 0
For details see here: rpi-runeaudio-wifi-as-accesspoint-control-t972-10.html#p16708
• Upgraded the Arch Linux Kernel to 4.9.63-1:
o Packages raspberrypi-firmware 20171119-1 raspberrypi-bootloader 20171119-1 linux-raspberrypi 4.9.63-1 linux-firmware 20171009.bf04291-1 cifs-utils 6.7-2 installed
o Modified RuneUI to determine the hardware platform in the new way, see details below
o The irritating random left <> right channel switching bug has disappeared (this is the main reason I put this image together)
o Included the latest linux-firmware for support of normally unsupported hardware/devices (e.g. WiFi dongles)
o Supported audio cards via overlays:
akkordion-iqdacplus
allo-boss-dac-pcm512x-audio
allo-digione
allo-piano-dac-pcm512x-audio
allo-piano-dac-plus-pcm512x-audio
audioinjector-addons
audioinjector-wm8731-audio
dionaudio-loco
dionaudio-loco-v2
fe-pi-audio
googlevoicehat-soundcard
hifiberry-amp
hifiberry-dac
hifiberry-dacplus
hifiberry-digi
hifiberry-digi-pro
iqaudio-dac
iqaudio-dacplus
iqaudio-digi-wm8804-audio
justboom-dac
justboom-digi
pisound
raspidac3
rpi-dac
rra-digidac1-wm8741-audio
For a full list of all overlays and documentation see:
• Via SSH: /boot/overlays/README
• Via Windows after flashing your SD-Card: <drive_letter>:/overlays/README
• Fix for problem "problem seeking in .wav and .aif files" included:
o Package libsndfile 1.0.28-1 installed
• Fix for problem "libreadline.so.7" included:
o Package readline 7.0.003-1 installed
o Library conflicts fixed
• Fix for KRACK WPA2 bug included:
o Packages openssl 1.1.0.g-1 pacman 5.0.2-2.1 wpa_supplicant 1:2.6-11 installed
• Modified RuneOS and RuneUI:
o Modified redis_datastore_setup with corrected Lunux version and build version
o Modified debug_collector so that debug contains config.ini information
o Disabled git pull from the dev UI and added a warning. The new method of determining the hardware platform is not available in the standard Rune git pull repository. Git pull will install the old incorrect method which cannot correctly determine the hardware platform for this Linux version
o Modified the settings UI to disable kernel switching
o To identify this image:
In debug: ‘Linux version 4.9.63-1-ARCH’ and ‘HW platform: RaspberryPi2 (08)’
From SSH: ‘uname -r’ which returns ‘4.9.63-1-ARCH’ together with ‘redis-cli get hwplatformid’ which returns ‘08’
Also from SSH: ‘redis-cli get buildversion’ which returns ‘janui-20171120’
Janui
PS If you would like a copy of my build logbook and a copy of the original & modified RuneOS and RuneUI files contact me via PM.