doen't play

Raspberry Pi related support

doen't play

Postby nofx » 11 Dec 2013, 19:32

Hi,

Nothing happens when pushing 'play'. Tryed 'pause' and 'play' again.
Tested various files (ogg, mp3).

fyi..
Got a 256 MB RPi, files on NAS.

What can I do? What information do you need?

BR
Michael
how did the cat get so fat?
User avatar
nofx
 
Posts: 23
Joined: 11 Dec 2013, 19:26
Location: Württemberg

Re: doen't play

Postby npejcic » 11 Dec 2013, 20:37

Maybe you should setup a device which play on your DAC card etc.:

I have USB to I2S, TOSLINK, SPDIF coax module based on CM6631A and I must set which device is linked for playing:

In mpd.conf I set:
audio_output {

type "alsa"
name "Output"
device "hw:1,1" << Default is set hw:1,1
dsd_usb "yes"
}

You can check what is in your hardware with:
[root@runeaudio ~]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 1: Audio [USB2.0 High-Speed True HD Audio], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Audio [USB2.0 High-Speed True HD Audio], device 1: USB Audio [USB Audio #1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Audio [USB2.0 High-Speed True HD Audio], device 2: USB Audio [USB Audio #2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Audio [USB2.0 High-Speed True HD Audio], device 3: USB Audio [USB Audio #3]
Subdevices: 1/1
Subdevice #0: subdevice #0

Best regards,
Nebojsa
npejcic
 
Posts: 13
Joined: 11 Dec 2013, 20:28

Re: doen't play

Postby lollopod » 11 Dec 2013, 22:09

I had the same issue using a MyDac (async).
I fixed setting the usb sound card index as 0 and avoiding bcm2835 to get the 0 according to the Arch wiki
https://wiki.archlinux.org/index.php/Ad ... sound_card

I did change the value in mod.conf as well
Code: Select all
audio_output {

type "alsa"
name "Output"
device "hw:0,0"
dsd_usb "yes"
}


Had a quick listening: the quality has improved a lot compared to RaspyFi; sound is more defined.
I still have some pops on 192kHz/24, but 96/24 is very good. :D
lollopod
 
Posts: 3
Joined: 11 Dec 2013, 19:49

Re: doen't play

Postby nofx » 12 Dec 2013, 07:09

Maybe I'm mistaken, didn't get the concept...is a mpd mandatory?!
I've got a NAS and a RPi. The RPi is connected to my stereo.
how did the cat get so fat?
User avatar
nofx
 
Posts: 23
Joined: 11 Dec 2013, 19:26
Location: Württemberg

Re: doen't play

Postby ACX » 12 Dec 2013, 09:26

nofx wrote:I've got a NAS and a RPi. The RPi is connected to my stereo.


Are you using the jack analog output? It's not working in this release, as we said here:
This is a testing release, and it’s limited to a basic setup: it only features wired ethernet connection, it only plays music from Network Attached Storage and only outputs to USB audio interfaces. So you’ll have to wait next release for a full featured system with Wi-Fi support, USB sources, webradio streaming and management, and analogic or HDMI output. We have temporarily left out all these features to focus development on system performance and sound quality.


About the soundcard order, in the next release we are going to force USB DACs to hw:0,0, and give bcm2835 the 1.
User avatar
ACX
RuneAudio co-founder
 
Posts: 1684
Joined: 29 Nov 2013, 02:25
Location: Udine, Italy

Re: doen't play

Postby lollopod » 12 Dec 2013, 10:04

nofx wrote:Maybe I'm mistaken, didn't get the concept...is a mpd mandatory?!


Actually RuneAudio runs an mpd instance.
lollopod
 
Posts: 3
Joined: 11 Dec 2013, 19:49

Re: doen't play

Postby nofx » 12 Dec 2013, 18:43

ACX wrote:
nofx wrote:I've got a NAS and a RPi. The RPi is connected to my stereo.


Are you using the jack analog output? It's not working in this release, as we said here:
This is a testing release, and it’s limited to a basic setup: it only features wired ethernet connection, it only plays music from Network Attached Storage and only outputs to USB audio interfaces. So you’ll have to wait next release for a full featured system with Wi-Fi support, USB sources, webradio streaming and management, and analogic or HDMI output. We have temporarily left out all these features to focus development on system performance and sound quality.


About the soundcard order, in the next release we are going to force USB DACs to hw:0,0, and give bcm2835 the 1.

Totally missed that part. I'm very sorry!
Looking forward.
how did the cat get so fat?
User avatar
nofx
 
Posts: 23
Joined: 11 Dec 2013, 19:26
Location: Württemberg

support RuneAudio Donate with PayPal


Return to Raspberry Pi

Who is online

Users browsing this forum: No registered users and 8 guests
cron