just in case someone is interested.. the IQaudIO Pi-DAC works quite well with some minor tweaks within Rune.
You just have to update the system with
- Code: Select all
pacman -Syu
reboot, then edit your /etc/modules-load.d/raspberrypi.conf that it looks like
- Code: Select all
bcm2708-rng
#snd-bcm2835
snd_soc_pcm512x
snd_soc_iqaudio_dac
reboot (again), execute
- Code: Select all
aplay -l
and from the output, which looks something like
- Code: Select all
[root@runeaudio /]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 2: sndrpiiqaudioda [snd_rpi_iqaudio_dac], device 0: IQaudIO DAC HiFi pcm512x-hifi-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
the numbers after card: (in this case 2) and device: (here 0) are important, because you have to edit /etc/mpd.conf and create there an extry like
- Code: Select all
audio_output {
enabled "yes"
type "alsa"
name "iqaudio_dac"
device "hw:2,0"
dsd_usb "yes"
}
However, Mixer doesn't work, so you can put in /etc/mpd.conf as mixer_type whatever you want, "hardware" throws some errors, but the sound output works anyway.
Then reboot a last time and enjoy.
(this is basically the same procedure as with the HifiBerry card (as mentioned here and here, just with different modules.)
-Ralf