RuneAudio+R e6

s.k.

Update 20201201
I like the new menu layout and also the ability to navigate through the bottom tabs.
Thanks rern !

BVLabs wrote Question: how can I turn off the check for updates? For example, I want to freeze this assembly at this stage.

+1 on this !

Russ

R101 wrote@[deleted],

Sorry rern, I think I have found another one. I unplugged and reconnected the USB DAC for the first time since the update, and am now back to having no sound card detected and no sound card entry in mpd.conf.

I, too, am facing the same problem, twice before last week because I was switching USB DACs. So I learned to stop playback before messing about with the USB DACs. And today, a third time as the USB DAC lost power (as I was physically moving the power supply to the DAC.)

On all occasions, I re-flashed. Is there better way, like a quick fix on the command line interface?

Also, the latest update has put a "padlock" icon besides "System" on the drop down menu. Previously, it has the settings icon. And no, I did not opt for password to access system menu (if there is such a thing.)

R101

R101 wrote@[deleted],

Sorry rern, I think I have found another one. I unplugged and reconnected the USB DAC for the first time since the update, and am now back to having no sound card detected and no sound card entry in mpd.conf.

The 20201201 update seems to have fixed this, as well as the playlist bug.

Thanks rern.

s.k.

Update 20201201
• Rune logo in ssh isn’t displayed correctly

• Doesn’t shows the fourth kernel load in Status

This “Voltage under 4.7V” does not appeared in my “prototype” SD image, but it appears on any clone made from it.
I haven’t notice any audible malfunction because of it.

• Disk capacity is missing (was on top in Addons page)
• A disk expansion addon would be nice

Alien8

Most of not all issues are now fixed.

My lcd still won't work with this. After much search I managed to get some characters on the display but nothing meaningful...
As mentioned earlier I have only gpio mode with different pinout.

One issue is https://gist.github.com/dbrgn/77d984a822bfc9fddc844f67016d0f7e but even with that I have no succes.

My pinout is definitely different, rs =8, en =7, r/w =None, d4-d8 =25,24,23,27.
Lcdchar claims only 26 pins support.

With GPIO.BCM I could assign pins directly and as said get a few characters but alas no useful display.

My (heavily modded) dockerized pydPiper script works fine though.(switching back and forth to debug)

A8

rern

BVLabs wrote ...
Question: how can I turn off the check for updates? For example, I want to freeze this assembly at this stage.
...

Updates is checked on each Addons page run and daily at midnight. Just ignore the update badge. You can wait and see any bug reports and fixes for a few days before going forward.
I'd like to freeze it as well but in a few days there's always been something to improve or fix. And that's what R+R e6 today.

rern

R101

@[deleted],

After unplugging the USB DAC and reconnecting it, I have to remount my USB memory stick and do a rescan.

KarelB

KarelB wroteThe question would be: Is it possible to downgrade kernel of RuneAudio+R e6 to 4.19.118 and how?

So first of all thank you rern, now the HiFiBerry DAC+ PRO works like a charm and you've really made my day - I just had to obtain a new card, the original seems to be broken somehow : "[ 8.647856] i2c-bcm2835 fe804000.i2c: i2c transfer timed out".
Next steps for long Christmas nights:
1) send rern couple of bucks for a coffee or beer
2) connect a Waveshare 4,3" DSI LCD display, IPS, 800×480, I2C, MIPI DSI - generally it was already working, just the graphics was a bit distorted; anyway I had to disconnected it during the HiFiBerry card troubleshooting. I suppose that this should not be anything hard (just note that it's killing Raspberry's onboard WiFi so wired LAN is necessary)
3) the final steep - to build some decent box so the old Sony SMP-N100 can be replaced finally
Thanks a lot for your work again. I'm really enjoying it!

PS: I can advice (e.g. PM) how to downgrade the kernel but it didn't help at all...

kolmberger

Thanks a lot to the developers for doing such a great work.

May I post my latest issue here? On a 3b+ I cannot get audio via Bluetooth on a speaker running. Pairing with the speaker succeeded, but no sound.
I might have wrong settings in MPD and / or System settings.

Can someone help me on configuring bluetooth output?

Thanks and cheers.

rern

s.k. wroteUpdate 20201201
• Rune logo in ssh isn’t displayed correctly
...
• Doesn’t shows the fourth kernel load in Status
...
This “Voltage under 4.7V” does not appeared in my “prototype” SD image, but it appears on any clone made from it.
I haven’t notice any audible malfunction because of it.

• Disk capacity is missing (was on top in Addons page)
• A disk expansion addon would be nice

@s.k.,

Logo:

: 01.jpg (34.57 KiB) Viewed 2094 times

A little too much for trying to be an image. It will be replaced with a text banner in next release.

CPU Load: Average number of processes which are being executed and in waiting calculated over 1, 5 and 15 minutes.

Under voltage: It got values and set status according to vcgencmd

/opt/vc/bin/vcgencmd get_throttled

Disk capacity: It's still in Sources section.

A disk expansion addon: Already expanded automatically on 1st boot.

PS. For the timezone sake, I had a good chance before lockdown to walk up the great Acropolis. It's mesmerizing.

rern

s.k.

Hi rern,
Thanks for your answers. Some clarifications:

Logo
I had in my mind your first version of the full length logo

Under voltage
I get

throttled=0x50000

According the link
… the Pi has previously been throttled due to under-voltage, but is not currently throttled for any reason.

So I guess is OK as is…

Disk capacity / expansion addon
Usually I resize my backup images.
If I use such a backup image I haven’t info regarding the possible expansion, neither an easy way to do it.

PS

kolmberger

Is anyone using RuneAudio+R e6 in combination with a 7" Raspberry Touch Display?

On my setup, I don't see the upper and lower bar?

Cheers!

ceejayemm

Klomberber

I use the Raspberry 7in screen with a PI3b+ and RA. It works really well. To turn on the top and bottom bars go the the Playback Display options (the multi-coloured disk under the main options menu) and use the option there.

Chris

kolmberger

ceejayemm wroteKlomberber

I use the Raspberry 7in screen with a PI3b+ and RA. It works really well. To turn on the top and bottom bars go the the Playback Display options (the multi-coloured disk under the main options menu) and use the option there.

Chris

I got it working, thanks for the help.

jsouza

While Googling around I stumbled across the following case+DAC for RPi4. Case has built-in power button and remote to control playback, etc. I imagine that power button integration with RuneAudio+R would be pretty straightforward via a script, and I imagine that the DAC will work, but the bigger question is whether the remote control would work. I'm guessing that the remote control buttons map to keystrokes, so I suppose the question is whether those keystrokes will do the intended function in RuneAudio+R.

https://nanomesher.com/shop/*NEW*-NanoSound-ONE-Hi-Fi-DAC-Case-for-Raspberry-Pi-p218569036

ceejayemm

Rern

Eagle Radio in the UK (originally available via 'http://str1.sad.ukrd.com:80/eagle') has been taken over by Greatest Hits Radio and the original stream is going to change to 'https://planetradio.co.uk/greatest-hits/player/?region=gas' in the near future. The new stream via this new URL is now available. It will play via a web browser (but not VLC) however adding this URL as a WebRadio to RA does some strange things, and even stranger when a logo is applied. It is not currently playable in RA at all, I guess this due to it trying to use some sort of internal player.

Can you or anybody else help ?

Thanks

Chris

RolandBlaze

@[deleted]

Can you or anybody else help ?

Hi Chris,

Appears to be pointing to here :- https://stream-mz.planetradio.co.uk/net2surrey.aac

RB

ceejayemm

RolandBlaze

Thanks, that seems to do the trick.

Out of interest how did you find this url, the nearest I got to this was:

http://tx.planetradio.co.uk/icecast.php?i=net2surrey.aac

via the http://www.radiofeeds.co.uk/ website

Thanks

Chris

daoane

Settings->System locked, no obvious way to unlock - failed update?

With the last update, the web-interface changed and is not accessible as before. In particular in the app, it is difficult to get at the settings menu. Furthermore, the "System" item in the settings menu is now locked (closed lock symbol). On the first attempt to unlock, a pop-up password window appeared. "rune" as password did not work, I haven't set another password. Now I'm locked out from the settings because since then I have no possibility unlock. Clicking the lock results in the "rune audio" logo page, nothing more. The same after reboot.

The update process for r6 seemed to work much better then in r5, where something failed with almost every update and required a re-flash. But apparently the last update failed. Or has anybody a solution to the password problem (or observed a similar behaviour)?

Russ

daoane wroteSettings->System locked, no obvious way to unlock - failed update?

With the last update, the web-interface changed and is not accessible as before. In particular in the app, it is difficult to get at the settings menu. Furthermore, the "System" item in the settings menu is now locked (closed lock symbol). On the first attempt to unlock, a pop-up password window appeared. "rune" as password did not work, I haven't set another password. Now I'm locked out from the settings because since then I have no possibility unlock. Clicking the lock results in the "rune audio" logo page, nothing more. The same after reboot.

The update process for r6 seemed to work much better then in r5, where something failed with almost every update and required a re-flash. But apparently the last update failed. Or has anybody a solution to the password problem (or observed a similar behaviour)?

Posted and still waiting for a solution

Russ wrote
Also, the latest update has put a "padlock" icon besides "System" on the drop down menu. Previously, it has the settings icon. And no, I did not opt for password to access system menu (if there is such a thing.)

« Previous Page Next Page »