RuneAudio+R e6

bink

only have a problem, as soon as I start using spotify I can no longer access the webinteface and I have to enter sudo reboot, then it works again until I start using spotify again.
used devices.....raspberry pi 3b, allo isolator v1, kali reclocker, piano 2.1.
kernel: 5.4.77-1-ARCH

By the way, Spotify can be operated normally via the Spotify app, only the rune web interface can no longer be accessed.

one more problem.
as soon as I go through another browser (smartphone) and try to play there, the sound is completely gone and does not return and I am forced to flash the rune img again.

edit:if spotify stops and starts again I get undefined and then the webpage is accessible again

when using spotify after refresh browser

as soon as I click on it and no longer available

after reboot settings available until I start using spotify again the problem starts all over

R101

@[deleted]

In the sources settings, the add share form has the field labels out of line with the fields.

(This is with a new install on a Pi2 using the latest image file.)

Alien8

rern wroteUpdate 20201122
- Fix - MPD option settings
- Fix - WebRadio name changed after play

rern

Well not in my universe...
Can't successfully set no volume (toggles on and back off) or change audio buffer size (ribbon displayed indefinitely) no additions to mpd.conf.

Custom additions do work, so I was able to add desired setting through the GUI.

Funny enough ffmpeg enable/disable still possible.

LCD char is still adding dtparam_i2c to boot config even though gpio is chosen, not really necessary in that case.
lcdchargpio.py is not in /srv/http/bash....
Also pin difference, so need to check in the code and change if necessary. My audiophonics dac amp board doesn't use standard pins, kinda hard to change in a multilayer pcb .
Right now I have a beautiful blank display.

Alsa problem was my bad, snapclient service was somehow still up after reboot.

Would it be possible to have a beta(well..) version to try the newer things, separate from a 'all is working' milestone version which may not be bleeding edge but still quite recent enough? Depending on the time you (re)install you can have a nice working or bit more bugged version?

A8

haddock

RuneAudio+Re6 working happily on Rpi 3B+ with Allo Piano 2.1 dac.
Had a struggle adding my NAS to sources, but succeeded. (I did not realize that the + sign was there for a reason).
However 2 smaller issuses remain.
1. Settings: Network --> Lan after changing the IP for the nameserver the change will not be reflected in teh bxo. Checking resolve.cond is showing that the change there is present. Not really an issue but confusing.
2. Settings: MPD --> Bit-Perfect clicking the No Volume results in the slider to turn blue and a warning box to show up. After clicking OK the blue slider slides back and turns gray again. Is this normal behaviour? I have all volume/mixer settings turned off.

bink

haddock wrote 2. Settings: MPD --> Bit-Perfect clicking the No Volume results in the slider to turn blue and a warning box to show up. After clicking OK the blue slider slides back and turns gray again. Is this normal behaviour? I have all volume/mixer settings turned off.

exactly the same here.

Rpi3, allo isolator v1,kali recklocker, piano 2.1.

R101

@[deleted]

There seems to be a serious problem with the MPD settings.

I unplugged and reconnected the USB DAC without powering down, which previously was not a problem. There is now no output, the MPD settings page is not accessible, and the output section of mpd.conf has no soundcard settings.

I have no volume control on the playback page, and mixer disabled.

klassikmann

Update R+R e6 20201122

If "System Menu -> Sound profile" checked: specific profile not selectable.
Possible reason: If /srv/http/data/system/soundprofile is created, ownership is root:root instead of http:http?

klassikmann

BVLabs

haddock wrote2. Settings: MPD --> Bit-Perfect clicking the No Volume results in the slider to turn blue and a warning box to show up. After clicking OK the blue slider slides back and turns gray again. Is this normal behaviour? I have all volume/mixer settings turned off.

Confirm - exactly the same here.

My setup - latest image RuneAudio+Re6 working on Rpi 3B with Terra-Berry DAC 2+

BVLabs

And another error:

: nas-err.jpg (20.88 KiB) Viewed 2024 times

Alien8

Alien8 wrote
Bug for me not changing system time, audio i2s change is not reflected on system page, nor is change written in /srv/http/data/system/ files.... still present.
A8

I stumbled on something that may shed a light : selecting an option on a drop down list (system time, i2s option) doesn't get through if I work on an android browser. Proven from at least 3 different android devices. Both chrome or firefox...
2 firefox versions as well.

Can somebody else confirm this please?

On my linux firefox there is no issue with this...

On off toggle and entry field (system name) is no problem.
Obviously the rest of the GUI responds fine which is just a click.
Minor 'feature'... not a big deal, you set variable and no need to touch it later.

Just checked, asking desktop site cures the problem as well..
Suspect selectric bug.

A8

KarelB

bink wrote
haddock wroteI'm trying to use RuneAudio+R e6 on a Rpi 3B+ with an Allo Piano 2.1 dac. Not all that easy.
First thing i did was updating RuneAudio. No problem, After that Selecting the Piano 2.1 dac and rebooting went smoothly. Music files were found on an inserted USB stick. But no sound coming from the dac. Opening the mpd tab is not possible. RuneAudio displays the flashing logo.
Unselecting the piano 2.1 dac is also possible. RuneAudio appears to be running correctly.
The dac is ok, as it works with the fork Volumio, but I prefer RuneAudio (running older version for years now).
Any suggestions how to proceed?
i have the same problem with a kali reclocker in between.

i think it has to do with the kernel but not sure if this same problem is also for runeaudio .
for now I'm using runeaudio over raspberry pi 4 with a musical fidelity m1 usb dac until this problem is solved

i am using a raspberry pi 3b for the kali and piano 2.1.

https://audiophilestyle.com/forums/topic/59996-piano-21-moode-66/?tab=comments#comment-1090411

I have run into the same issue ("Opening the mpd tab is not possible. RuneAudio displays the flashing logo"), this time with HiFiBerry DAC+ PRO. It seems obvious that the issue is related to a new kernel and the card compatibility as discussed e.g. here: https://www.raspberrypi.org/forums/viewtopic.php?t=144284. Have tested a lot other applicationsincluding of this workaround his: https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/ w/o any positive result.

The question would be: Is it possible to downgrade kernel of RuneAudio+R e6 to 4.19.118 and how?

Edited @10:40: Raspberry Pi 4B, 4GB RAM
Thanks a lot, K

rlsten

Updated to Re6 20201122 Kernel 5.4.71-1 with RPi4 and Waveshare Screen attached via DPI (not HDMI or GPIO).

Rotate Screen in landscape now does not work. Have been using this setup for a long time with various versions of Rune Re with no problem until now.

Is there a file I can modify manually to change the rotation?

Thanks!

losiek68

I have Raspberry Pi 1 B+ with HiFi Berry DAC and 20x4 LCD display and I am using rune version 0.5. Yesterday I gave a chance to this one and it worked out of the box. I found that this version is slower than rune 0.5. It takes some time to change info after track changed (both web browser and LCD). I know RPi 1 B+ is outdated HW but rune 0.5 with text LCD works like a charm.

I added mappings for polish diacritical letters in hd44780_a00.py. I think it is worth to mention about it.

Could you add scrolling on LCD?

I found that adding source works in old Microsoft Edge (pre Chromium):

but on Chromium based browsers looks like in this post

klassikmann

Update R+Re6 20201127

The latest update resolves for me the following problems:

Cumbersome switching "Mixer Control" from "disable" to "MPD software" and vice versa
see reports by bink, r101, BVLabs
Using Bluetooth as sender not possible, sink found but no pairing
If "System Menu -> Sound profile" checked: specific profile not selectable.

klassikmann

BVLabs

Hello!
All bugs discussed earlier have been fixed. This is great news.
But, now the access point does not work normally - it is impossible to connect, the mobile device does not receive the IP address. Constantly - "obtaining ip address..."

Re6 20201127 • RuneAudio
Raspberry Pi 3 Model B Rev 1.2
BCM2837 • 4 Cortex-A53 @ 1.2GHz • 1GB
Apple Pi DAC
5.4.77-1-ARCH

Boot log:

Nov 30 09:59:33 runeaudio hostapd[309]: Configuration file: /etc/hostapd/hostapd.conf
Nov 30 09:59:33 runeaudio hostapd[309]: wlan0: Could not connect to kernel driver
Nov 30 09:59:33 runeaudio hostapd[309]: Using interface wlan0 with hwaddr b8:27:eb:30:60:94 and ssid "RuneAudio"
Nov 30 09:59:33 runeaudio hostapd[309]: random: Cannot read from /dev/random: Resource temporarily unavailable
Nov 30 09:59:33 runeaudio hostapd[309]: random: Only 0/20 bytes of strong random data available
Nov 30 09:59:33 runeaudio hostapd[309]: random: Not enough entropy pool available for secure operations
Nov 30 09:59:33 runeaudio hostapd[309]: WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects
Nov 30 09:59:34 runeaudio dnsmasq[310]: dnsmasq: syntax check OK.
Nov 30 09:59:34 runeaudio systemd-networkd[217]: wlan0: Gained carrier
Nov 30 09:59:34 runeaudio hostapd[309]: wlan0: interface state UNINITIALIZED->ENABLED
Nov 30 09:59:34 runeaudio hostapd[309]: wlan0: AP-ENABLED
Nov 30 09:59:34 runeaudio systemd[1]: Started dnsmasq - A lightweight DHCP and caching DNS server.
Nov 30 09:59:34 runeaudio systemd[1]: Reached target Network is Online.
Nov 30 09:59:34 runeaudio systemd[1]: Reached target Host and Network Name Lookups.
Nov 30 09:59:34 runeaudio kernel: audit: type=1130 audit(1606723174.124:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dnsmasq comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 30 09:59:34 runeaudio audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dnsmasq comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 30 09:59:34 runeaudio systemd[1]: Started Shairport Sync - AirPlay Audio Receiver.
Nov 30 09:59:34 runeaudio audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shairport-sync comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 30 09:59:34 runeaudio kernel: audit: type=1130 audit(1606723174.144:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shairport-sync comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 30 09:59:34 runeaudio systemd[1]: Started UPnP Renderer front-end to MPD.
Nov 30 09:59:34 runeaudio audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upmpdcli comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Nov 30 09:59:34 runeaudio dnsmasq[315]: started, version 2.82 cachesize 150
Nov 30 09:59:34 runeaudio dnsmasq[315]: compile time options: IPv6 GNU-getopt DBus no-UBus i18n IDN2 DHCP DHCPv6 no-Lua TFTP conntrack ipset auth DNSSEC loop-detect inotify dumpfile
Nov 30 09:59:34 runeaudio dnsmasq[315]: DBus support enabled: connected to system bus
Nov 30 09:59:34 runeaudio dnsmasq[315]: warning: interface wlan0 does not currently exist
Nov 30 09:59:34 runeaudio dnsmasq-dhcp[315]: DHCP, IP range 192.168.5.2 -- 192.168.5.254, lease time 1d
Nov 30 09:59:34 runeaudio dnsmasq[315]: reading /etc/resolv.conf
Nov 30 09:59:34 runeaudio dnsmasq[315]: using nameserver 217.19.208.19#53
Nov 30 09:59:34 runeaudio dnsmasq[315]: using nameserver 8.8.4.4#53
Nov 30 09:59:34 runeaudio dnsmasq[315]: cleared cache
Nov 30 09:59:34 runeaudio sshd[312]: Server listening on 0.0.0.0 port 22.

R101

@[deleted],

There is a small bug on the playlist page.

If the playlist is displayed, when the cursor moves to track 2, it leaves the play icon and elapsed time showing on track 1 until it moves on to track 3. It then leaves the icon on track 3 until it moves to track 5, and so on. Any action which refreshes the page, clears the error.

R101

@[deleted],

Sorry rern, I think I have found another one. I unplugged and reconnected the USB DAC for the first time since the update, and am now back to having no sound card detected and no sound card entry in mpd.conf.

kiko

I have added several of my streaming stations from the DI.FM service.

When I try to play one of them, I get:
Nov 30 15:41 : ffmpeg/lrc: Format lrc detected only with low score of 5, misdetection possible!
Nov 30 15:41 : ffmpeg: No audio stream inside
Nov 30 15:41 : exception: Failed to decode http://listen.jazzradio.com/premium/smoothjazz.pls?listen_key=5ef7ec8e262201d
Nov 30 15:41 : player: played "http://listen.jazzradio.com/premium/smoothjazz.pls?listen_key=keygoeshere"

I can take the same URL and play it in VLC.

Any Idea what the issue may be?

RuneAdudio e6 20201127
Raspberry Pi 3 Model B Plus Rev 1.3

cmh714

The stations are inside of the .pls file.....use those in Web radio. Save the pls and then open in an editor....hth

kiko wroteI have added several of my streaming stations from the DI.FM service.

When I try to play one of them, I get:
Nov 30 15:41 : ffmpeg/lrc: Format lrc detected only with low score of 5, misdetection possible!
Nov 30 15:41 : ffmpeg: No audio stream inside
Nov 30 15:41 : exception: Failed to decode http://listen.jazzradio.com/premium/smoothjazz.pls?listen_key=5ef7ec8e262201d
Nov 30 15:41 : player: played "http://listen.jazzradio.com/premium/smoothjazz.pls?listen_key=keygoeshere"

I can take the same URL and play it in VLC.

Any Idea what the issue may be?

RuneAdudio e6 20201127
Raspberry Pi 3 Model B Plus Rev 1.3

BVLabs

Hi! In the new update, all the problems I described are fixed. Thank you so much, Rern!

Question: how can I turn off the check for updates? For example, I want to freeze this assembly at this stage.
Maybe this can be done with an option in the section - Features?

« Previous Page Next Page »