RuneAudio+R e6

cmh714

kiko wroteStrange, it does not work for me.

It plays with no issue using VLC on my MacBook Pro

I'm running rAudio 1 20210302 on a Raspberry PI 3b

I am fully updated and as I said its working here....I also update the OS via pacman and there were some damn big updates this week.....

kiko

Thanks for the info!

http://77.68.84.201/stream/3/ should be 44Khz 32 bit 256 kbps
where http://77.68.84.201/;m3u is 44Khz 24bit 128 kbps

http://relaxingjazz.com/ has several different streams of the same music.

surfninja

kiko wroteThanks for the info!

http://77.68.84.201/stream/3/ should be 44Khz 32 bit 256 kbps
where http://77.68.84.201/;m3u is 44Khz 24bit 128 kbps

http://relaxingjazz.com/ has several different streams of the same music.

this seems to work too
http://77.68.84.201/stream/;m3u

I didn't spend a lot of time listening to the station. not my gig.

marco

Hi All,

I have tried Volumio / Moode and decide to use Rune finally. The sound quality is so good for me. Very appreciate the great works! However, whenever i click the Album, Album Artist and Artist in the library, it is not responding, just stay at the library page, the others such as NAS, Webradio works fine.

I'm running rAudio 1 20210302 on a Raspberry PI 4. I changed the Output_Buffer_Size to 63556 in order to have the correct list of albums. Please Help! Thank you all.

Attachments

: 1.jpg (18.84 KiB) Viewed 2715 times

dmitrich

Hello @[deleted]! I haven't used your product for a while. Recently downloaded and updated the version. I edited the file wlan0 as usual and renamed it to wlan. The first launch went fine. I saw raspberry on the net. But then I rebooted the box (did not add anything to the configuration) and the network disappeared. I connected the monitor and saw that under the barcode the address is 192.168.5.1 and it is not the address received from the dhcp server. Tell me how to fix this? Also, the beta version from the github does not work either.

surfninja

dmitrich wroteHello @[deleted]! I haven't used your product for a while. Recently downloaded and updated the version. I edited the file wlan0 as usual and renamed it to wlan. The first launch went fine. I saw raspberry on the net. But then I rebooted the box (did not add anything to the configuration) and the network disappeared. I connected the monitor and saw that under the barcode the address is 192.168.5.1 and it is not the address received from the dhcp server. Tell me how to fix this? Also, the beta version from the github does not work either.

The 192.168.5.1 is the access point you can use to connect to the Rune for configuration (say you want to setup wifi). you might need to fix your wlan.

i just reloaded from scratch using a USB in place of of the microSD and it worked fine. the system works great so something in your configuration you did isn't working.

dmitrich

surfninja wrote The 192.168.5.1 is the access point you can use to connect to the Rune for configuration (say you want to setup wifi). you might need to fix your wlan.

Thanks for the answer. I am aware of the access point. I have a dual band router. I haven't made any configuration changes as I wrote earlier. Today I connected the box via an Ethernet network. This allowed me to configure the Wifi over a 2GHz network. Everything worked right away. If I install 5GHz then after reboot the access point appears and the connection does not work.

R101

dmitrich wrote If I install 5GHz then after reboot the access point appears and the connection does not work.

Could this be because the country code is wrong, and your 5GHz channel is not available?

Have you tried iwlist channel to check?

It might be worth checking the SSID file contents in /etc/netctl too.

rern

dmitrich wrote ... The first launch went fine. I saw raspberry on the net. But then I rebooted the box (did not add anything to the configuration) and the network disappeared. I connected the monitor and saw that under the barcode the address is 192.168.5.1 and it is not the address received from the dhcp server. Tell me how to fix this? Also, the beta version from the github does not work either.

Try today's update again. Now it forces to reconnect if the 1st attempt failed.

rern

Auralcurator

rern wrote
BVLabs wrote ...
Before that, I had a previous version, after the update, the access point mode worked fine, but after the first reboot of the player, this defect repeated itself again. If you use a new image right away, it doesn't work right away.
- Settings > Features > enable
- Click RPi Access Point lable and post the result.

Auralcurator wrote ...
Is there any way to find an error or indicator for what is causing the Album list to not generate?
...
Try:
mpc -f '%album%^^[%albumartist%|%artist%]^^%file%' listall \
| awk -F'/[^/]*$' 'NF && !/^\^/ && !a[$0]++ {print $1}' \
| sort -u
Does the result list all albums as it should?

No :/

rAudio:/etc/samba # mpc -f '%album%^^[%albumartist%|%artist%]^^%file%' listall | awk -F'/[^/]*$' 'NF && !/^\^/ && !a[$0]++ {print $1}' | sort -u
MPD error: Connection closed by the server

And let's see that 1 album:
cat /srv/http/data/mpd/album
rAudio:/etc/samba # cat /srv/http/data/mpd/album
T^^Trancesylvania 2^^Various Artists^^NAS/SynSation/Compilations/Trance-Techno/TrancsSylvania/TranceSylvania 2/CD1rAudio:/etc/samba #

rern

dror

Hi
How do I add the following address as webradio

http://s2.kzradio.net/live/mp3/icecast.audio

Thanks

surfninja

dror wroteHow do I add the following address as webradio

http://s2.kzradio.net/live/mp3/icecast.audio

Thanks

this isn't a valid url in my part of the world.

to add web radios (assuming this is your question), click on the + on the Web Radios page.

My world radio map couldn't find it either. you might want to try radio.garden to find a stream. I can't find streams for every web radio.

dror

surfninja wrote
dror wroteHow do I add the following address as webradio

http://s2.kzradio.net/live/mp3/icecast.audio

Thanks
this isn't a valid url in my part of the world.

to add web radios (assuming this is your question), click on the + on the Web Radios page.

My world radio map couldn't find it either. you might want to try radio.garden to find a stream. I can't find streams for every web radio.

Well, I just tried to use the inspect feature in Chrome browser and that's the address I found. That radio station is at
Http://kzradio.net

It has a live stream. I also tried to add a suffix like .Mp3 and .aac with no avail.

EDIT: found the correct stream url:
https://kzradio.mediacast.co.il/kzradio_live/kzradio/icecast.audio

And it is a valid input for rAudio, as is.

Thanks

surfninja

I seem to have lost my volume control with a recent update.

this is a Pi Zero with only usb out (no Audio I2S defined in the System page). I'm using a USB DAC (Behringer UCA202). I am able to control the volume from the USB DAC. I am able to listen to music through the USB DAC.

Is it possible to enable the volume control from my web browser?

i'm running 20210330.

< a few hours later>
I fixed this by enabling Player->Output->Volume Control = MPD Software

Beelzebassie

20210330 disables WiFi with every reboot/restart. Can anyone confirm this behavior?

EDIT: Behavior persists, even with today's update (April 3rd) and a fresh image.

giovilux

I have done a fresh install today and wifi does not work.
I have created a wifi file and put it in the ROOT.
I see that it is enabled if I connect through LAN but it does not work.

Thanks
Giovanni

bobbyb

Hello,

I am running the latest version RuneAudio+R e6, webplayer and streaming through upnp works fine but I failed to play songs through spotify connect. I have a premium account and I can play on other devices without problems.
I didn't change anything in the original configuration but activated spotify and upnp.
The songs seems to be playing through spotify but I cannot hear any sound. I tested it with different clients.
Volume is maxed out,
Running on Rpi1, wired connection.

Any idea what is going on and how to troubleshoot the issues?

Thanks for any help/advice

AndyF

Hi bobbyb,

you should change to rAudio1 (it´s Re6´s successor) - Re6 won´t be supported anymore.
https://github.com/rern/rAudio-1
Issues on rAudio1 should be discussed here:
https://github.com/rern/rAudio-1/discussions

I´m using latest version on RPi3 - and spotify works like a charm.

regards, Andy

bobbyb

AndyF wroteHi bobbyb,

you should change to rAudio1 (it´s Re6´s successor) - Re6 won´t be supported anymore.
https://github.com/rern/rAudio-1

regards, Andy

Hi Andy

actually I have the version you mentioned above:
rAudio 1 • 20210403
5.10.25-4-ARCH armv6l
Raspberry Pi Model B Rev 2
BCM2835 • 455MiB
ARM1176 @ 700MHz

I have installed the latest update from within the web interface. But the issue persists. No audio output while playing through spotify connect but web radio as well as upnp is working fine. :/
I'll post my issue in the link you provided thanks.

dror

It's actually been a while since I tried to play songs from my Nas, but I faced an issue.

Some songs or albums are not playable after added to the queue. Or, for others, the track length is not correct. Some though are playable.
I first thought it might have something with enabling FFmpeg, but it doesn't.
What I suspected next was the way rAudio interprets cue files. Didn't investigate too much but if I add a file/album with an external MPD remote (I use M.A.L.P which is awesome) it does add, and is playable even through rAudio web interface.

My version is 20210302

« Previous Page Next Page »