RuneAudio+R e6

Beelzebassie

gracequiles wroteWas successful in installing, connecting to my network and building library. But having a problem installing my I2S DAC. In System settings I select appropriate I2S module but it doesn't stick (reverts to disabled).
Speed Test

You did update rAudio to the latest version after flashing the SD-card?

surfninja

gracequiles wroteWas successful in installing, connecting to my network and building library. But having a problem installing my I2S DAC.

Next to the GPIO Devices title, click on the gears to see if your selection is loaded. try different selections (tab, return,...) to select the I2S device. I didn't have this problem and just recently updated to rA1.

surfninja

surfninja wrote

Question, when I select an artist, should I be able to see the related albums?

Thanks!

This now is working as I expected on my RP2B.
Thanks for the fix!

bink

Sonic wroteJust popped in to thank Rern for restoring the scroll bars in the RPi Browser - Thanks again.

And I find this

bink wrote
rune interface looks nice on my newly built raspberry pi streamer.

Gutting a 'Linn' tuner to build a Pi streamer.

That looks soooo cool!

hahahaha

the linn kudos was already broken, I did use a part of the powerboard and the transformer to power the raspberry pi.

Caleb

Can you tell me which display you are using? How is it connected?
Does the touchscreen work?
Can you write the contents of the touchscreen setup file?
I want to do as you do, but my display only shows a gray field and an arrow pointer.

bink

Caleb wroteCan you tell me which display you are using? How is it connected?
Does the touchscreen work?
Can you write the contents of the touchscreen setup file?
I want to do as you do, but my display only shows a gray field and an arrow pointer.

at the moment I have volumio on it. and with runeaudio the touchscreen works normally by only activating the plugin in runeaudio. tonight I'll put here how I did it all ....

here a link to YouTube so you can see that it works fine.
https://youtu.be/AfzkUqu1u9U

Caleb

Cool.
I see that it works.
When my sensor shows the pointer, it has one inverted vertical.

bink

Caleb wroteCool.
I see that it works.
When my sensor shows the pointer, it has one inverted diagonal.

I'll explain how and what tonight, I now have other things to do.
the frame where the keys of the linn kudos were in I cut to size and glued the touchscreen with kit on it ........ the touchscreen fits exactly in between.
I use this touchscreen.

bink

this is the original pcb of the linn and under the pcb is the powerboard where the first pin comes out exactly 5 volts dc, the rest of the pins have a higher voltage.
tonight I will continue

Caleb

I look forward to continuing.

My display.

https://aliexpress.ru/item/33041327727.html?spm=a2g0o.productlist.0.0.7a0268beJR5yFd&algo_pvid=d6d04f5c-7590-475b-add6-d1c2ad4417f0&algo_expid=d6d04f5c-7590-475b-add6-d1c2ad4417f0-2&btsid=0b8b034c16138319027085265ea4c7&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_&sku_id=67335077076

bink

Caleb wroteI look forward to continuing.

My display.

https://aliexpress.ru/item/33041327727.html?spm=a2g0o.productlist.0.0.7a0268beJR5yFd&algo_pvid=d6d04f5c-7590-475b-add6-d1c2ad4417f0&algo_expid=d6d04f5c-7590-475b-add6-d1c2ad4417f0-2&btsid=0b8b034c16138319027085265ea4c7&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_&sku_id=67335077076

okay you have the same touchscreen as mine and use the same drivers.

I'll try runeaudio tomorrow to see if I get the same problem as yours.

I also use two raspberry pi (version 2b and 4b) one with the touchscreen connected and the other (at the back, pi 2b) with an allo isolator v1 and an allo boss 2.1.
as power supply for the isolator I use the studer900 powerboard with a 10 volt ac block transformer.
for the raspberry 2b and allo boss 2.1 a Power Module A-19 2x3-20V LT1083 bought at audiophonics this gets ac power from a toroidal transformer of 2x 12 volt.

the raspberry pi 4b for the screen I use the 5 volt power supply and transformer of the linn kudos, I also use the usb output from the rasp 4 that goes to a musical fidelity m1 dac A.
I also have the option to switch the allo isolator to an external 12 volt battery or to switch to the studer900, just because I could and there is a little difference in audio sound.

allo boss v2.1
https://allo.com/sparky/boss-dac.html

allo isolator v1
https://allo.com/sparky/isolator.html

3,5 inch touchsreen
https://www.waveshare.com/wiki/3.5inch_RPi_LCD_(A)

audiophonics powerboard
https://www.audiophonics.fr/en/linear-regulated-psu/power-module-a-19-2x3-20v-lt1083-p-4381.html

must mention that I sawed studer900 in half, one side broke and so I could still use it for the allo isolator

studer900
https://nl.aliexpress.com/item/32877699126.html

12 volt battery
https://www.nkon.nl/vmf-12v-7ah-loodaccu.html?gclid=CjwKCAiAg8OBBhA8EiwAlKw3klVgpt7fumIaMt3a8F8Zy6gn8uPPpmrlRgZb0BEGRVp9wnSwOVlwLhoC3zwQAvD_BwE

Caleb

Greetings.
I used this screen in conjunction with version 3b.
I used the firmware laid out at the beginning of the topic, without changes, only updated. Tomorrow I'll try to take a photo of his behavior.

Caleb

I have only assembled raspberry + display, the display is connected directly to the raspberry.

I will use the player with Amanero+ galvanic isolation + AH-D6

http://audiohobby.ru/articles/vysokokachestvennyi-cap-ah-d6-versija-2-h.html

bink

Caleb wroteGreetings.
I used this screen in conjunction with version 3b.
I used the firmware laid out at the beginning of the topic, without changes, only updated. Tomorrow I'll try to take a photo of his behavior.

will try it tomorrow and maybe I will get the same problem as you have now.

Caleb

What version of firmware did you use?

can you upload the firmware image of your player to the cloud storage?

bink

this morning flashed the last img of runeaudio and activated the 3.5 inch plugin, but unfortunately I also get a gray screen.
so what worked before about 2 months ago unfortunately no longer works.

bink

Caleb wroteWhat version of firmware did you use?

can you upload the firmware image of your player to the cloud storage?

i am now using volumio for the screen and adapted according to a topic there.

if you want to continue with runeaudio, you will have to seek help from someone else here, I will not go into it further to get it working for me because I now use volumio and that still works fine for me.

rern

As of 20201224, this has been upgraded to a New Version.

Caleb

Hello.
It was this image that I used for Raspberry 3B, I just did not create an empty file lcd
maybe this is the problem

bink

Caleb wroteHello.
It was this image that I used for Raspberry 3B, I just did not create an empty file lcd
maybe this is the problem

I also tried this latest version and put an empty file called lcd in boot and this didn't work for me ....... maybe it works for you.

« Previous Page Next Page »