RuneAudio+R e2 - An improved version of RuneAudio

klassikmann

@[deleted]
@[deleted]
Sorry. Sure, system menu not sources menu.

rern wrote@[deleted],

All right. It's System page, not Sources page. Next update with this one fixed then.

rern

AndyF

@[deleted]

I'm not sure I follow your thought Andy...can you explain?

After scanning your songs the updated database is written to data folder. I thought about a loop because of changed mpd database file -> trigger for auto update.

But rern promised a fix. So everything will be fine.

Regards, Andy

rern

Update 20191006
- Fix - Update notification when Auto update enabled.
- Fix - System page layout on small screen.

rern

klassikmann

rern wroteUpdate 20191006
...
- Fix - System page layout on small screen.
...

Thank you.

klassikmann

cmh714

@[deleted], small request maybe....I personally use BOTH Consume mode and Repeat mode to achieve what I want. Currently, you have it so enabling Consume, disables Repeat and vice a versa. Wondering if you might change that behavior?

For context if it matters, I always have several webradios in my Queue and then add other music at the bottom, so that when it finishes, it goes back to the start and radio stations.....

Regardless, I take care of it at the commandline.....THANKS!!!!!

Toube

Hi Rern,

I tried to get the 1.2 version up and running but no luck.
Do I need an additional USB thumb drive attached to the Rpi to get up and running?

Nope no difference using USB thumbdrive.
My problem is that I'm not seeing any menus anywhere so I cant access anything.
I can use the /addons.php or /indexsettings.php but that doesn't help... I can't get the menus to appear.
Anyone experienced the same phenomenon with 1.2 version?

Regards,
Toube

rern

Toube,

The USB drive is a MUST.
You can't just plug in the drive after initial boot was run. It has to be plugged in for initial setup on very first boot.
Reflash the SD card and try again.

rern

Toube

rern wroteToube,

The USB drive is a MUST.
You can't just plug in the drive after initial boot was run. It has to be plugged in for initial setup on very first boot.
Reflash the SD card and try again.

rern

Hi Rern,

thanks I will try again with USB drive in upon first boot.

-Toube

Toube

Hi Rern,

an update. I got it working, a few questions:

- Does the thumbdrive need to be there all the time?
- I can't enable or disable features in System, Network, MPD or any other pages.

-Toube

Alien8

Toube wrote - I can't enable or disable features in System, Network, MPD or any other pages.

-Toube

I've done the same thing
and have pretty much the same bug

Steps so far :

flash SD card and format USB your latest version Re1.2
copy known network config file into /etc/netctl while SD card mounted on PC after flash
insert into RPi2 and pray
if successfull, I can connect to the device over WIFI immediately (usually works)
without doing any updates to latest versions, I can manage to put in all my settings fine
after updating to the latest master version on github, I can no longer change anything in system, and MPD pages, didn't dare to touch the network settings
an old bug seems to creep up again : changing the time zone 'scrambles' the I²S DAC settings to usually X10 DAC and it's impossible to set it back to my working config. Upon close of the system page, I get the reboot popup.
Almost every reboot has to be a cold boot, a warm boot just hangs after mounting/starting the USB peripeherals
After the boot, I don't have I²S output on the MPD page and no sound, analog output instead
If I go back to system page, I see that my dac is selected correctly yet the relevant section of the /boot/config.txt shows differently
```
#dtparam=i2c_arm=on
#dtparam=i2c_vc=on
#dtparam=i2s=on
#dtparam=spi=on
#dtparam=act_led_trigger=mmc
#dtdebug=on

#dtparam=uart1=off
#dtoverlay=pi3-disable-wifi
#dtoverlay=pi3-miniuart-bt

## RuneAudio HDMI & 3,5mm jack
dtparam=audio=on

## RuneAudio I2S-Settings
#dtoverlay=none
```
as a workaround I can select the hifiberry dac, I can get sound but get a lot of 'playing silence to avoid xrun' in MPD
If I go back to system page, I can switch back to my AudioPhonics DAC/AMP yet the system seems to reboot twice and I end up with analog audio only on MPD page, while the system page shows the correct setting again
a check of the config.txt shows no changes made
Also on the system page, after the last updates I can't seem to change any toggle buttons anymore and the timezone shows the first option of the list (Africa/A.. (don't remember)
luckily the timezone is still correct (system time is local time)
I checked and confirmed that all the settings I normally change from default are stored in the USB/name/data/system/ folder (when done before the updates)
The same System page also no longer shows some status data (uptime, version...) at the top of the page since the updates
And yes, the last version ungarbled the System page
Even worse, since the latest updates, I can't mount my nfs NAS anymore, used to have no issues so far
I get the informative 'mount failed' message when I try to mount it through the gui
dmesg has no messages of even trying to mount anything save the local SD/USB
(playing webstreams since )
If it was setup before the updates, It mounts after a reboot, to get unmounted some time later
(no setting was changed on said NAS)
A small thing : everytime I do an update after the initial flash/setup, the 'version' is returned to Re1 and not Re1.2 in ssh prompt, settings page...

So for now I guess I have to stay clear of the latest updates until these issues are properly addressed as I have an unusable system now
I'll keep a spare sd with hopefully a working config (base Re1.2) and hopefully manage to get my music database rebuilt properly

cmh714

is your USB ext4 formatted?

for nfs just use nolock for options and that fixed me.....I also did ro for read-only

Toube

I formatted my USB using ext4 system.
My add-ons page also states that I have version e1 and not e1.2

ceejayemm

Toube

Check your System page for version, mine shows:

System Status
RuneAudio e1.2
Kernel 4.19.75
Hardware Raspberry Pi 3 Model B Rev 1.2
Time 2019-10-07 • 17:23 @ London
Up time 3 days 20 hours 44 minutes
Since 2019-10-03 • 20:38

But Addons page shows:

Addons
11.49 GiB free
Aria2
Rank Mirror Package Servers
RuneAudio+R e1 ★
RuneAudio+R e1 - Import Webradio
RuneAudio+R e1 - Reset
RuneUI GPIO
Transmission

I also mount NFS shares via the Sources page using the 'USB anfd NAS' '+' button to manually mount my Open Media Vault NFS shares manually not via Network shares search option. I don't use any options but I did find that the share name changed from e1 where it needed '/Music/iTunes/Music' to e1.2 when it changed (back) to '/export/Music/iTunes/Music' (as per RA .03/0.4/0.5).

Chris

cmh714

is you are using the Search shares option, I believe that is connecting via CIFS/SMB not nfs....I could be wrong but believe that is what I have seen/noticed in the past.

Toube

Ok guys,
Thanks the system says 1.2.
Anything I can try to get the settings buttons to work?
My USB drive was formatted as ext4 file system before usage.

-Toube

cmh714

@[deleted], possible bug in last update....I cant seem to scroll my UI left and right from the main Player page.....still poking around....

cmh714

cmh714 wrote@[deleted], possible bug in last update....I cant seem to scroll my UI left and right from the main Player page.....still poking around....

ok, actually seems to be working but maybe the "grab" areas got smaller since it seems I need to get closer to the edge to pull.....

Alien8

cmh714 wroteis your USB ext4 formatted?

for nfs just use nolock for options and that fixed me.....I also did ro for read-only

Thanks, NAS mount fixed again...
Did another reflash, on add-ons page it appears to be the latest version.
Didn't format USB, so most settings work ok, yet the time zone/scramble dac bug is still there.
For now I'll try to keep the poking around to the minimum...

belgarath0815

On latest update I'm suddenly unable to use any of the toggle switches in settings...like enable Dsd over pcm in mpd or enable WiFi in system

...very strange

Anybody else with this issue?

cmh714

belgarath0815 wroteOn latest update I'm suddenly unable to use any of the toggle switches in settings...like enable Dsd over pcm in mpd or enable WiFi in system

...very strange

Anybody else with this issue?

Yes, same here

« Previous Page Next Page »