RPi 3 B+

SimonS

I boy this model (same price as old one), but I think I make mistake. Runeaudio not work with this device

Is something possible to do, or I must buy new older type....

dajand

Hi, it's probably of no consolation to you but I have a similar issue with two Raspberry Pi 3 B+ units. The power led flashes and it won't boot into Rune although it boots into Raspbian with no issue. In my case it's not a power issue or a corrupt sd card, I've tried three different cards and three different high rated power supplies. It runs a treat on a Pi 2.

Maybe somebody at Rune could have a look or someone else could make a comment and offer some insight.

Regards

dajand

SigMaster

I'm curious for this one to.
At the moment, I use a Pi3b, but recently bought an extra Pi, the 3b+, for better networkperformance.

janui

Hi SigMaster & SimonS,

Sorry, it wont work. For more information see here: #4434474

janui

SimonS

No problem.
I exchange it for RPi 2. But I still have problem with android app. It is not working and I have no idea why. So I use web interface.

SigMaster

janui wroteHi SigMaster & SimonS,

Sorry, it wont work. For more information see here: #4434474

janui

Thanks for info, I was aware of that thread, but was curious, if someone from RuneAudio was working on a solution.
I do not intent to rush or push someone, I'm only curious

PierreG64

i found a way to run runeaudio on a rpi 3 B+

I did it in an ampiric way, using two rpi. A rpi 3 and a rpi 3B+.

On the rpi 3, I used the 0.4b hondagx35 version, I wanted to have an on-screen display.
https://docs.google.com/uc?id=0B5E5WDN-EI9Lc3ZzVEcwWDE0LUE&export=download
Extend the partition:
http://www.runeaudio.com/documentation/troubleshooting/extend-partition-sd/
but for me i have to write:

resize2fs /dev/mmcblk0p2

at the end for work.

I have installed the addons of rern (with Putty).
#53701
Update the mpd, midori in the webui addons.

after i update the kernel using the soluce of hondagx35
#4434391
. I don't know why, but after the update, the option to enable i2s disappear.
I supose you have to enable i2s and choose the audio card before the kernel update.
It's not a problem for me, i have an usb dac.

And after all that, I put the microsd in the rpi 3 b+, and it works for me!!!

tml3nr

PierreG64 wrotei found a way to run runeaudio on a rpi 3 B+

I did it in an ampiric way, using two rpi. A rpi 3 and a rpi 3B+.

On the rpi 3, I used the 0.4b hondagx35 version, I wanted to have an on-screen display.
https://docs.google.com/uc?id=0B5E5WDN-EI9Lc3ZzVEcwWDE0LUE&export=download
Extend the partition:
http://www.runeaudio.com/documentation/troubleshooting/extend-partition-sd/
but for me i have to write:
resize2fs /dev/mmcblk0p2
at the end for work.

I have installed the addons of rern (with Putty).
#53701
Update the mpd, midori in the webui addons.

after i update the kernel using the soluce of hondagx35
#4434391
. I don't know why, but after the update, the option to enable i2s disappear.
I supose you have to enable i2s and choose the audio card before the kernel update.
It's not a problem for me, i have an usb dac.

And after all that, I put the microsd in the rpi 3 b+, and it works for me!!!

Many thanks to PierreG64. By your guide Rune 0.4 work fine on my RPi3 B+ with my USB sound card and i2s DAC.

For me i2s working normally.

tml3nr

After trying several times. I just do the following steps:

- Rune 0.4_20170229, run on RPI3

#4434

- Extend patition

- Update kernel by hondagx35's guide:

#4434391

- Edit /etc/rc.local to fix sched_rr_timeslice_ms = 10 (Same as before update):

nano /etc/rc.local

Add to:

#!/bin/sh
echo 10 > /proc/sys/kernel/sched_rr_timeslice_ms

chmod +x /etc/rc.local

nano /usr/lib/systemd/system/rc-local.service

Edit:

[Unit]
Description=fix kernel optimizations
After=network.target

[Service]
Type=simple
ExecStart=/etc/rc.local
TimeoutSec=0

[Install]
WantedBy=multi-user.target

systemctl enable rc-local

systemctl start rc-local

After that it's work fine on RPi3 B+!

Thanks again PierreG64.

Debug data after update to 4.14.50-2 and fix sched_rr_timeslice_ms:

###### Kernel optimization parameters ######
hardware platform:	RaspberryPi2
current orionprofile:	RuneAudio

kernel scheduler for mmcblk0:			[noop] deadline cfq 
/proc/sys/vm/swappiness:			0
/proc/sys/kernel/sched_latency_ns:		4500000
/proc/sys/kernel/sched_rt_period_us:		1000000
/proc/sys/kernel/sched_rt_runtime_us:		950000
/proc/sys/kernel/sched_autogroup_enabled:	1
/proc/sys/kernel/sched_rr_timeslice_ms:		10
/proc/sys/kernel/sched_min_granularity_ns:	2250000
/proc/sys/kernel/sched_wakeup_granularity_ns:	3000000

PS: i use Apple TC as NAS for music storage. After update, on RuneUI album cover artwork is not displayed. After work around, at last it's OK with SMB advanced options:

vers=1.0,sec=ntlm,cache=none,noserverino,ro

PierreG64

tml3nr wrote:
- Edit /etc/rc.local to fix sched_rr_timeslice_ms = 10 (Same as before update):

Code: Select all
nano /etc/rc.local

Add to:

Code: Select all
#!/bin/sh
echo 10 > /proc/sys/kernel/sched_rr_timeslice_ms

Code: Select all
chmod +x /etc/rc.local

Code: Select all
nano /usr/lib/systemd/system/rc-local.service

Edit:

Code: Select all
[Unit]
Description=fix kernel optimizations
After=network.target

[Service]
Type=simple
ExecStart=/etc/rc.local
TimeoutSec=0

[Install]
WantedBy=multi-user.target

Code: Select all
systemctl enable rc-local

systemctl start rc-local

After that it's work fine on RPi3 B+!

thanks tml3nr for the improvements. It's great!

memi0

Hi, newbie here.. anybody who managed to make it run on RPi 3 B+ would be so kind to upload an image file?
So I would be able to test it on my RPi 3 B+ too.

Thanks!

tml3nr

memi0 wroteHi, newbie here.. anybody who managed to make it run on RPi 3 B+ would be so kind to upload an image file?
So I would be able to test it on my RPi 3 B+ too. Thanks!

IMG file from my post:

#63939

Download:

http://www.mediafire.com/file/ic252lrdfxqbvhc/RuneAudio_0.4_20180629_SC_Pi3B_Plus_v3_tml3nr.rar

Mirror:

https://www.fshare.vn/file/GWYV887Z5EB3

Checksum:

File: RuneAudio_0.4_20180629_SC_Pi3B_Plus_v3_tml3nr.rar
CRC-32: cf9650f4
MD4: 6e5f0d3e481a6bba45b39929ae031365
MD5: ac9feadd693cdbb4dcee8d944172a43c
SHA-1: 1bb4d05ed651867b0732ad0439b10a2a98a29ccb

stanleychin

tml3nr wrote
memi0 wroteHi, newbie here.. anybody who managed to make it run on RPi 3 B+ would be so kind to upload an image file?
So I would be able to test it on my RPi 3 B+ too. Thanks!
IMG file from my post:

#63939

Download:

http://www.mediafire.com/file/ic252lrdfxqbvhc/RuneAudio_0.4_20180629_SC_Pi3B_Plus_v3_tml3nr.rar

Mirror:

https://www.fshare.vn/file/GWYV887Z5EB3

I've download the file,but the 7 zip can't open the archive. There's a error message says can't open.
stanleychin

tml3nr

stanleychin wrote
tml3nr wrote
memi0 wroteHi, newbie here.. anybody who managed to make it run on RPi 3 B+ would be so kind to upload an image file?
So I would be able to test it on my RPi 3 B+ too. Thanks!
IMG file from my post:

#63939

Download:

http://www.mediafire.com/file/ic252lrdfxqbvhc/RuneAudio_0.4_20180629_SC_Pi3B_Plus_v3_tml3nr.rar

Mirror:

https://www.fshare.vn/file/GWYV887Z5EB3
I've download the file,but the 7 zip can't open the archive. There's a error message says can't open.
stanleychin

- Please download again, and use winrar to extract.

fox.peko

Hi all,

this img works wiht my rs pi3+ but I have problem with my sound card IQaudIO Pi-Digi+ . This model is not in Audio outputs list. Is some possible way to update it .

Thank you very much

tml3nr

fox.peko wroteHi all,

this img works wiht my rs pi3+ but I have problem with my sound card IQaudIO Pi-Digi+ . This model is not in Audio outputs list. Is some possible way to update it .

Thank you very much

It's here:

fox.peko

tml3nr wrote
fox.peko wroteHi all,

this img works wiht my rs pi3+ but I have problem with my sound card IQaudIO Pi-Digi+ . This model is not in Audio outputs list. Is some possible way to update it .

Thank you very much
It's here:

Hi,

I have to found it but after select it, is only possible choose only jack 3,5 and hdmi in MPD CONFIGURATION... It is basic outputs from pi3b+ no any coax or spdif-toslink.
Thank you

hondagx35

Hi,

did you reboot your device?

Enable I²S output selecting one of the available drivers, specific for each hardware. After rebooting the output interface will appear in the MPD configuration select menu, and drivers will also auto-load from the next reboot.

Frank

fox.peko

hondagx35 wroteHi,

did you reboot your device?

Enable I²S output selecting one of the available drivers, specific for each hardware. After rebooting the output interface will appear in the MPD configuration select menu, and drivers will also auto-load from the next reboot.
Frank

Oh no, my fault. Apply button is not regular and I am not read small letters near it.

)
Thank you

occhio37

Good afternoon, have I recently bought the Pi-DAC PRO model, will I have to select 'IQuadio Pi-DAC +'? will it work? Which one do I have to choose, DAC or DAC+?

Thanks for the answer