by Alien8 » 07 Oct 2019, 15:38
Toube wrote:- I can't enable or disable features in System, Network, MPD or any other pages.
-Toube
I've done the same thing
and have pretty much the same bug
Steps so far :
- flash SD card and format USB your latest version Re1.2
- copy known network config file into /etc/netctl while SD card mounted on PC after flash
- insert into RPi2 and pray
- if successfull, I can connect to the device over WIFI immediately (usually works)
- without doing any updates to latest versions, I can manage to put in all my settings fine
- after updating to the latest master version on github, I can no longer change anything in system, and MPD pages, didn't dare to touch the network settings
an old bug seems to creep up again : changing the time zone 'scrambles' the I²S DAC settings to usually X10 DAC and it's impossible to set it back to my working config. Upon close of the system page, I get the reboot popup.
Almost every reboot has to be a cold boot, a warm boot just hangs after mounting/starting the USB peripeherals
After the boot, I don't have I²S output on the MPD page and no sound, analog output instead
If I go back to system page, I see that my dac is selected correctly yet the relevant section of the /boot/config.txt shows differently
- Code: Select all
#dtparam=i2c_arm=on
#dtparam=i2c_vc=on
#dtparam=i2s=on
#dtparam=spi=on
#dtparam=act_led_trigger=mmc
#dtdebug=on
#dtparam=uart1=off
#dtoverlay=pi3-disable-wifi
#dtoverlay=pi3-miniuart-bt
## RuneAudio HDMI & 3,5mm jack
dtparam=audio=on
## RuneAudio I2S-Settings
#dtoverlay=none
as a workaround I can select the hifiberry dac, I can get sound but get a lot of 'playing silence to avoid xrun' in MPD
If I go back to system page, I can switch back to my AudioPhonics DAC/AMP yet the system seems to reboot twice and I end up with analog audio only on MPD page, while the system page shows the correct setting again
a check of the config.txt shows no changes made - Also on the system page, after the last updates I can't seem to change any toggle buttons anymore and the timezone shows the first option of the list (Africa/A.. (don't remember)
luckily the timezone is still correct (system time is local time)
I checked and confirmed that all the settings I normally change from default are stored in the USB/name/data/system/ folder (when done before the updates) - The same System page also no longer shows some status data (uptime, version...) at the top of the page since the updates
- And yes, the last version ungarbled the System page
- Even worse, since the latest updates, I can't mount my nfs NAS anymore, used to have no issues so far
I get the informative 'mount failed' message when I try to mount it through the gui
dmesg has no messages of even trying to mount anything save the local SD/USB
(playing webstreams since )
If it was setup before the updates, It mounts after a reboot, to get unmounted some time later
(no setting was changed on said NAS) - A small thing : everytime I do an update after the initial flash/setup, the 'version' is returned to Re1 and not Re1.2 in ssh prompt, settings page...
So for now I guess I have to stay clear of the latest updates until these issues are properly addressed as I have an unusable system now
I'll keep a spare sd with hopefully a working config (base Re1.2) and hopefully manage to get my music database rebuilt properly
RPi2B Rev 1.2, AUDIOPHONICS I-SABRE AMP DAC ES9023, Audiophonics ATX, hd44780 LCD running R+Re6