Getting a DAC+ setup

[audio007]

Sorry that this covers old ground for many of you but I need an injection of knowledge!
My problem is that Rune is not seeing my HiBerry DAC +. (It was seen when I was running Volumio)
I have a PI2, 0.4 Rune, Win10 with PuTTY so I can SSH to the SD card insitu.

I understand that config.txt needs the DAC+ line to have its remark '#' removed and then rebooted.
I have done this but it is still not showing in Rune Settings.

I am sure it is something obvious but since this is all fairly new to me it isn't obvious!

Thanks
PS Tried to add a debug file but the forum would not accept it ??

[popov]

Sorry that this covers old ground for many of you but I need an injection of knowledge!
My problem is that Rune is not seeing my HiBerry DAC +. (It was seen when I was running Volumio)
I have a PI2, 0.4 Rune, Win10 with PuTTY so I can SSH to the SD card insitu.

I understand that config.txt needs the DAC+ line to have its remark '#' removed and then rebooted.
I have done this but it is still not showing in Rune Settings.

I am sure it is something obvious but since this is all fairly new to me it isn't obvious!

Thanks
PS Tried to add a debug file but the forum would not accept it ??

Envoyé de mon iPhone en utilisant Tapatalk

[popov]

Sory an issue in train ... message live empty..

Do you have a look to setings ? I2s have to be activated. After you normaly could see dac in mpd menus.
If not working connect in ssh have a look to lsmod. You should see module for hi Berry, load and link to snd. If not ... you are not came from config.txt or card

Regards


Envoyé de mon iPhone en utilisant Tapatalk

[hondagx35]

Hi audio007,

please post your debug info.

Frank

[audio007]

Hi audio007,

please post your debug info.

Frank

I would if I could Frank but it won't accept my file Debug.txt, it says the extension txt is not allowed.

??

[audio007]

It also rejected a pdf version ??

[hondagx35]

Hi audio007,

Collecting debug info
HOW TO COLLECT AND POST DEBUG INFO

1. In the RuneUI, go to MENU > Debug;
2. Refresh the page a couple of times, waiting some seconds between every refresh
3. Click the "COPY DATA TO CLIPBOARD" button;
4. Go to http://pastebin.com and paste the debug output in the "New Paste" textarea. Leave the default options (Syntax Highlighting: None, Paste Expiration: Never, Paste Exposure: Public), give a name to il (e.g. RuneAudio debug info) and submit.
5. Copy the url of the submitted Pastebin (e.g. http://pastebin.com/dL1k9irT) and include it in your post here in the forum.

Please also post your config.txt.

Frank

[audio007]

Thanks, I was trying the Upload Attachment process.

http://pastebin.com/Ky3pEQvN

[hondagx35]

Hi audio007,

Code: Select all

[    6.376763] snd-rpi-hifiberry-dacplus sound: ASoC: CPU DAI (null) not registered
[    6.376790] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517
[    6.380803] snd-rpi-hifiberry-dacplus sound: ASoC: CODEC DAI pcm512x-hifi not registered
[    6.380828] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517
[    6.560537] pcm512x 1-004d: Failed to reset device: -5
[    6.560665] pcm512x: probe of 1-004d failed with error -5

I understand that config.txt needs the DAC+ line to have its remark '#' removed and then rebooted.

Is this we only change you made? Please check this again.

Code: Select all

#dtparam=i2c_arm=on
#dtparam=i2c_vc=on
#dtparam=i2s=on
#dtparam=spi=on
#dtparam=act_led_trigger=mmc
#dtdebug=on

#dtparam=uart1=off
#dtoverlay=pi3-disable-bt-overlay

# Uncomment one of these lines to enable an audio interface
#dtoverlay=hifiberry-dac
dtoverlay=hifiberry-dacplus
#dtoverlay=hifiberry-digi
#dtoverlay=hifiberry-amp
#dtoverlay=iqaudio-dac
#dtoverlay=iqaudio-dacplus


Frank

[audio007]

I have just gone through the file with nano and found only one other line without '#'
It was an LCD line, so I added one
I am rebooting and will post the new debug txt shortly