tkl12498 Hello. I downloaded and flashed runeaudio_rpi2-rp3_0.4-beta_2010321_2GB.img onto my SD card and booted up the RPi. After a bit of tweaking I got the music library on a USB-attached drive connected and indexed. My RPi and Raspberry DAC output to my stereo receiver. I can select a track and play it (I see it playing on the interface) but no sound comes from the speakers or through the headphone jack. The only settings I have changed are: Output interface = Raspberry/Pi Analog Out Volume Control = Enabled - hardware (I also tried Disabled and enabled - software, and clicked Save and Apply whenever changing) Any suggestions? Thank you.
Ears of Tin I recommend you start from scratch with https://github.com/rern/rAudio-1. You are using a very old version of the player software. There are many improvements to be found in the latest (and renamed) version.
eea123 That's the version I am still using. I seem to remember having a hard time getting it to take off the first time. A reboot did the trick. I could get playback on the headphone output, but not the I^2S DAC's RCA outputs. Make sure the settings are set to the I^2S when before you reboot into it. I see you are using an outbound DAC. I don't have that, but I would probably not set Rune to analogue if you are still trying to use a DAC after the headphone outputs.
robertsheffield I recommend you start from scratch with https://github.com/rern/rAudio-1. minecraftle game is interesting. You are using a very old version of the player software. There are many improvements to be found in the latest (and renamed) version. Thanks for your answer. This is what I am looking for
