lepmor Guy sorry if i trouble i'm completly new on the forum and using runeaudio for the first time . Installed in a SD card and functioning with digital audio . My objective was to have it in function with Analog output so i bought a DAC module PIFI , hardware installed i select it on runeaudio configuration but nothing on output , tryed to connect a headphone but nothing . I see a red led always on in the board but i do not know the meaning because the board arrived with no manual , nothing . someone can help me ?
surfninja you should state what version of Rune you are using. I know I've used this DAC with e6, e5 and possibly others. I think you need to use the hifiberry dac Pro+ drivers for .3 and .4. e5 and e6 you can select the dac in the system settings.
rastus surfninja wroteI think you need to use the hifiberry dac Pro+ drivers for .3 and .4. e5 and e6 you can select the dac in the system settings. The PiFi DAC+ uses the HiFiBerry DAC+, not the "hifiberry dac Pro+".
surfninja rastus wroteThe PiFi DAC+ uses the HiFiBerry DAC+, not the "hifiberry dac Pro+". thanks for the correction
lepmor This is the image i have downloaded : RuneAudio_rpi2_rp3_0.4-beta_20160321_2GB.img.gz so means that i have to remove the comment in the file config.txt related to the HIFIBerry DAC+ ? nothing other ? (for me is already a lot !!!!! ...find the file ... remember how to use sudo nano !!!! and find the right line in the file !!!! ) Thanks guys for the support , this evening i will try doing my best .
lepmor Ok i will download a create a sd with this image . What is OP ? have i to do the modification of the file config.txt or with this image "e6" i have to do nothing and my DAC module will be recognized automatically ?
lepmor I have already downloaded the image , can you publish the link where to read this OP ? sorry but i do not understand if you mean the Open post of the page downloading image or where .
lepmor Can you publish the link of the OP . ANyway considering that excluding the output audio analog , all was functioning . At the end installing this version have i to modify the config.txt to have the PIFI in function or not ? Is it necessary to modify others configuration files connected to the objective to have the analog output in function ?
rastus OP = Original Post = the first post YOU made in this thread. Or, or the first post in the thread that is linked above. Judging by your questions and statements in this thread I would say your computer/internet skills are of a low level. Maybe it would be best to buy a ready made product, because RuneAudio requires some knowledge and skill before starting a build. I'm thinking your going to need simple step by step instructions. Regards, Rastus.
