RuneAudio+R e3

belgarath0815

Update 0418 broke browse by folder

Sorting Order is wrong

Tried to rebuild the database, didn't help.

Regards,

Edit: looks like not only browse by folder is affected, also some files are in the correct order..

maravtatet

Hi everyone,

I'm testing this release on a RPi1, and I'm struggling with network share configuration through your UI.

I'm trying to add a source on my local network which is 192.168.2.201 and I consistently receive a message saying IP host doesn't exist.
Yet, using ssh and direct mount command, I was able to mount the network share.

Is this a known issue ?

Thanks in advance for your time

R101

maravtatet wroteHi everyone,

I'm testing this release on a RPi1, and I'm struggling with network share configuration through your UI.

I'm trying to add a source on my local network which is 192.168.2.201 and I consistently receive a message saying IP host doesn't exist.
Yet, using ssh and direct mount command, I was able to mount the network share.

Is this a known issue ?

Thanks in advance for your time

Have you tried putting vers=2.0 in the option field when using the setup form? It cured a similar problem for me.

R101

@[deleted]

If an album track is playing and I go to Library and replace/play a radio station, the track time from the album remains on the playback page.

Time, and Webradio elapsed, are disabled in the playback display menu..

vennesch

Hello, any ideas why I can only play music at 44.1khz? I got a Hifiberry DAC+ and Tidal Masters account. Via BubbleUpNP and Linn Kazoo I got the same results.

On Qobuz I get 24 bit on 96.0khz and 2.49mb/s
On Tidal I get ''f bit'' on 44.1khz and 320kb/s

What causes Tidal to be inferior on Rune?

P.S. no cover art or Artist info in Qobuz
P.P.S. What the heck is ''f bit''? Even Google seems to have never heard of it.
P.P.P.S. did a fresh install to be sure, no difference

valemax

Hi all, first post here so thanks for everything!.
Now, back to business, setting public key authentication fails on R e3 (and failed on R e2 too), because /root directory has 775 permissions and sshd does not like when the home directory is readable to all.

There are two solutions, the most logic would be to set 700 on /root, or one can set "StrictModes off" in sshd_config.

Before I go on and break something, is there a reason why /root has 775 or is just a distraction and I can set 700 and live happily thereafter?

INRI

How can I edit the library over ssh? Who can help me? Thanks.

I found it myself: /srv/http/data/webradios

rern

R101 wrote ...
If an album track is playing and I go to Library and replace/play a radio station, the track time from the album remains on the playback page.

Time, and Webradio elapsed, are disabled in the playback display menu..

A fix will be included with next update.

vennesch wroteHello, any ideas why I can only play music at 44.1khz? I got a Hifiberry DAC+ and Tidal Masters account. Via BubbleUpNP and Linn Kazoo I got the same results.

On Qobuz I get 24 bit on 96.0khz and 2.49mb/s
On Tidal I get ''f bit'' on 44.1khz and 320kb/s

What causes Tidal to be inferior on Rune?

P.S. no cover art or Artist info in Qobuz
P.P.S. What the heck is ''f bit''? Even Google seems to have never heard of it.
P.P.P.S. did a fresh install to be sure, no difference

Run this command while playing each service:

 { echo currentsong; echo status; sleep 1; } | telnet localhost 6600

valemax wrote ...
Before I go on and break something, is there a reason why /root has 775 or is just a distraction and I can set 700 and live happily thereafter?

It's what ArchLinuxArm set. The permission will break nothing as far as I can think of.

INRI wroteHow can I edit the library over ssh? Who can help me? Thanks.

Please be more specific about the edit.

Next update

Sync Streaming - Snapcast - Synchronous multiroom audio player
Streaming - via http port 8000 (e.g., 192.168.1.111:8000)
Dedicate a CPU core for MPD.
Improve volume control.

rern

kirx

@[deleted]

Many thanks for the continuous improvement of RuneAudio.

Everything works like a charm in my setup (RPi 3B+ along with the TDA1387x8 USB-DAC)
Keep on going!

Respectfully,
Kir.

GlennS

@Rern,
This new version is just brilliant, thanks. I'm glad that I did the learning-curve from V0.4, though. One question (well, two questions) :

I see Lirc has gone, I see it's replaced with gpio_ir, but how can I add my own RC that isn't in the list ?

If I use your GPIO addon, do I have access to GPIO to add my own functions (controlling other devices via I2C) ?

In any case, many thanks for all of the support work and many thanks for this new and very slick version.
GlennS

kailua

Hello,

I just built RuneAudio+Re3 via the DIY method. Everything went fine with running create-alarm.sh on my desktop. But after inserting the SD card into my Pi3 I saw a lot of messages in the journal that some daemons (e.g. timedate) could not be started.
It turned out that the service responsible for creating the temporary file directories could not start because of unsafe path transitions.

I checked the permission on / and it had 700 owned by the alarm user and not root. I don't know where that came from but setting the correct permissions (755) and ownership (root) fixed the problem. Also, I tried it two times with the same result. So, that might be a permanent problem.

Just to let you know if you run into similar problems.

Cheers

6b4g

Thanks very much for this new release of Runeaudio!

I tip from my side. I had to add "vers=1.0" in the "Options" field when mounting my NAS share using CIFS in order to get it mounted.

best regards,
Kees

rern

GlennS wrote ...
If I use your GPIO addon, do I have access to GPIO to add my own functions (controlling other devices via I2C) ?
...

Yes, you do.

kailua wrote ...
I just built RuneAudio+Re3 via the DIY method. Everything went fine with running create-alarm.sh on my desktop. But after inserting the SD card into my Pi3 I saw a lot of messages in the journal that some daemons (e.g. timedate) could not be started.
It turned out that the service responsible for creating the temporary file directories could not start because of unsafe path transitions.

I checked the permission on / and it had 700 owned by the alarm user and not root. I don't know where that came from but setting the correct permissions (755) and ownership (root) fixed the problem. Also, I tried it two times with the same result. So, that might be a permanent problem.
...

I've just built it with no permissions issue. What is your Linux dirtro? bsdtar in the build script should preserve the correct permissions.

rern

rern

Update 20200501

This cannot be updated via Addons as usual. Please download updated image files from links in the 1st post.
Backup existing data and settings: Menu > Settings > Backup/Restore Settings

Renderer
Spotify Connect - Spotifyd

Streamer
Sync Streamer - Snapcast- Synchronous multiroom audio player
Streamer - via http port 8000 (e.g., 192.168.1.111:8000)

Dedicate a CPU core for MPD
Improve volume control
Auto expand root partition (remove /boot/x.sh to skip)
Upgrade kernel and packages

rern

kailua

I use ArchLinux. But, I think I found the reason for the wrong permission. I used the KDE filemanager to mount the partitions of the SD card which mounted them with user rights. Also I formatted the partitions with the disk utility. I think that the first or a combination of both caused the wrong permission of / on the SD card.

Cheers

klassikmann

Update 20200501

Some minor glitches after installation and backup restoration:

Radio buttons (e.g. restore settings, sound profile, replay gain) and check-boxes (library & playback display) are way too big (Firefox).
System menu: "Browser on RPi" and "Wi-Fi" are incorrectly checked.
Sources menu: /etc/fstab contains superflous line, same share with doubled parameter informations.
Addons menu: Version string stayed at "20200418".

klassikmann

cmh714

Nevermind....finally on the tenth or so time it poped up

Update 20200501

Same as above....also I cannot get the MPD settings page to render

R101

Hi rern,

The pause button has reappeared on the Webradio playback page.

All the usual problems getting the wifi working, plus I had to enable netctl. Is this version for wired connection only?

eggshell

The best just got better! Thanks, it is working great. For those who can't render the MPD page. I had the same issue. I changed back to the 3.5mm audio out, rebooted, then switched to i2s and rebooted. Voila MPD page renders.

Thanks Rern for your amazing player.

Andreas

rern

cmh714 wroteNevermind....finally on the tenth or so time it poped up

Update 20200501

Same as above....also I cannot get the MPD settings page to render

Please post results of:

/srv/http/bash/mpd-data.sh

R101 wrote ...
All the usual problems getting the wifi working, plus I had to enable netctl. Is this version for wired connection only?

If I recall correctly, your SSID is hidden, isn'i it? Try show it as normal and connect R+R e3 again.
Tips: Debunking Myths: Is Hiding Your Wireless SSID Really More Secure? (If not, it's still worth reading though.)

Or post results of:

ifconfig
iwlist wlan0 scan

rern

« Previous Page Next Page »