Rune 0.5 Pi 3B+ First run issues... noob here

leardo

Hello all,

Wondering if i could get some help installing the latest so it will work with the 3B+ model.

I get the following messages and Rune never starts.

I've attached an image of the screen. Any help is appreciated!!

Mike

leardo

#6532540

janui

Hi leardo,
See this post: #6532504
janui

leardo

janui wroteHi leardo,
See this post: #6532504
janui

Thanks much! I was not getting any ethernet connectivity so I thought that the boot process had failed.

Looks like I need to get into the Ad-hoc Wifi to set it up from your post.

Is the standard DHCP on the ethernet connection disabled on the initial setup?

Thanks!

janui

Hi leardo,

leardo wroteIs the standard DHCP on the ethernet connection disabled on the initial setup?

No, it is enabled and wired ethernet should come up automatically. Very occasionally the initial boot process stalls, then a manual power off/on may be required. The initial boot can take up to 3 minutes, subsequent boots should take less than 30 seconds.
Depending on your client, one of the following should connect: http://runeaudio.local, http://runeaudio or http://runeaudio. (this last one has a '.' as the last character).
If you still have problems check the checksum of the download file and if that is OK recreate the Micro-SD card.
janui

leardo

janui wroteHi leardo,
leardo wroteIs the standard DHCP on the ethernet connection disabled on the initial setup?
No, it is enabled and wired ethernet should come up automatically. Very occasionally the initial boot process stalls, then a manual power off/on may be required. The initial boot can take up to 3 minutes, subsequent boots should take less than 30 seconds.
Depending on your client, one of the following should connect: http://runeaudio.local, http://runeaudio or http://runeaudio. (this last one has a '.' as the last character).
If you still have problems check the checksum of the download file and if that is OK recreate the Micro-SD card.
janui

Thanks! Looks like some rebooting fixed it.

I am having some weird issues where I can not select the Spotify, Airplay, or DLNA options for sources and they are greeted out.

I wonder if something if incorrect in my configuration and setup of the Pi