Casper26 Hi all, I recently finished a Pi/DAC/Amp contraption and have a question regarding the proper way to shutdown Rune OS. As it is installed now I turn off my Amp via a power button I installed on the case and then I have to shutdown the Pi from within the web interface to then disconnect the power form the it. I would like to install a power switch that would properly run the shutdown sequence for the OS, is there any way I could do this? I have looked a bit in other forums regarding this topic and it seems I could wire the button to pins 5 and 6 and then tweak the code but I have no clue what kind of tweak I would need to do to the Rune OS.
janui Hi Casper26, Take a look at this, maybe it will give you some idea's: #42621 Be carefull, high voltage equipment can be dangerous. janui
Casper26 janui wroteHi Casper26, Take a look at this, maybe it will give you some idea's: #42621 Be carefull, high voltage equipment can be dangerous. janui Thank you so much! I will purchase the relay board and rewire my unit. I did not know that controlling all the equipment from within the OS was a possibility.
