Support for dacberry2/3+ ?

prometh

Hi all,

I was just wondering if these two DACs are supported by rune audio right now:
Tekdevice dacberry2+ and/or dacberry3+ ?

http://tekdevice.com/chapter2/index.php?route=product/product&product_id=116
http://tekdevice.com/chapter2/index.php?route=product/product&product_id=115

Thanks!

ACX

Hi prometh,
this DAC uses the ES9023 chip, so please take a look at this thread:
#529

prometh

Thanks, I guess i can wait a little longer.

how about the 2+ Version which uses a PCM5102A DAC, does this one work already?

Cheers,
prometh

ACX

prometh wrotehow about the 2+ Version which uses a PCM5102A DAC, does this one work already?

That's the DAC used in HiFiBerry DAC+, IQaudIO Pi-DAC+ and RaspyPlay4, so it's worth to try to select one of them from the I²S kernel modules select menu in the Settings screen, and see if it works out of the box. If you have the possibility to test it please report the results here.

prometh

Unfortunately I ordered the ES9023. Lets see. Anyway I'm still curious whether it will arrive, even though it's a US company, they ship from Honk Kong...

npejcic

ACX wrote
prometh wrotehow about the 2+ Version which uses a PCM5102A DAC, does this one work already?
That's the DAC used in HiFiBerry DAC+, IQaudIO Pi-DAC+ and RaspyPlay4, so it's worth to try to select one of them from the I²S kernel modules select menu in the Settings screen, and see if it works out of the box. If you have the possibility to test it please report the results here.

Just one correction: PCM5102A is used on Hifiberry and RaspyPlay3, different Ti DAC (PCM5122) is used on Hifiberry+ and RaspyPlay4.

ACX

npejcic wroteJust one correction: PCM5102A is used on Hifiberry and RaspyPlay3, different Ti DAC (PCM5122) is used on Hifiberry+ and RaspyPlay4.

Whoops, my mistake! My apologies for the slip

prometh

I just recieved a dacberry3+. It does something using the hifiberry setting, however output volume is very low and mainly noise. It might be just broken, but I think in general its supported already. Btw. same thing using volumio where its supposed to work properly.

EDIT: Nvm was an issue of the power supply, the dacberry3+ works fine, just no hardware volume control even though according to the manufacturer it should be working.