Cannot connect via Wifi

so_la_la

Hi,
I managed to use RuneAudio with a LAN connection to my NAS.
Now I have an Edimax Wifi Dongle.
I configured my Fritzbox connection under http://runeaudio/network/ and it worked (ticked green).
I am unable to connect via Wifi; however on plugging in the ethernet I can also see the blue controller light of the wifi dongle alight and blinking.
Then, under http://runeaudio/network/, I also see both connections enabled. When I plug out the ethernet the connection terminates.

Either the Wifi Dongle is really slow to start up
Or it only works once LAN is enabled.
Either way this is not a good solution!
What can I do?
Thank you!

Oh and one more thing:
Plugging in the LAN wire means I have to rescan/update the library though nothing has changed, which takes quite a long time. Obviously every device is automatically unmounted once the LAN wire is removed. Is there anyway to circumvent this behaviour?

EDIT: After a while the WLAN seems to work... yeah!
EDIT EDIT: it's playing but it's not accessible on my browser...
so_la_la

Oh, and cover art + volume control seems to go missing for some reason... it's no longer there in the interface.
pearsori

I experience similar behavior.
Works properly when connected via wired ethernet.
I can define wlan connection via web interface and I can connect to either via ssh.

cannot connect via browser interfface http://runeaudio when I reboot via wireless only, yet I can ssh into system. (it is up, running with static IP, wlan0)
when I launch web interface via http://<ipaddress> it launches, but shows CONNECTING....
rathmannm

I had the same issue. You need to modify the wpa_supplicant.conf file in /etc/wpa_supplicant and add your WiFi information in there. All I added was the following:

network={
ssid="<your WLAN SSID>"
psk=<your WLAN password
}

That's all. After a reboot you should be able to access the rune web interface.

Cheers,
Manuel
cmh714

the same can be put into the file for netctl located in /etc/netctl/wlan0 if you dont wish to use wpa_supplicant
Bastien

Hello all,

Rune audio seems to work perfectly with ethernet but when i try i'm absolutely unable to connect wifi.
I tryed everthing mentionned in this post :
#696

I try to to what rathmannm explain in his post but i don't now how to change those value (linux beginner...) :
network={
ssid="<your WLAN SSID>"
psk=<your WLAN password
}
###### System info ######
Linux version 3.12.26-1-ARCH (nobody@root-armv6-copy) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 PREEMPT Fri Aug 8 17:40:14 MDT 2014

HW platform:	RaspberryPi (01)

playerID:	01ce22edff80022f9116a029273a35ec69
systemd-+-agetty
        |-avahi-daemon---avahi-daemon
        |-avahi-dnsconfd
        |-dbus-daemon
        |-devmon---udevil
        |-dhcpcd
        |-ifplugd
        |-mpd---4*[{mpd}]
        |-nginx---nginx
        |-php-fpm---3*[php-fpm]
        |-redis-server---2*[{redis-server}]
        |-rpcbind
        |-rune_PL_wrk
        |-rune_SY_wrk---sh---debug_collector---sh---pstree
        |-shairport---{shairport}
        |-sshd
        `-systemd-udevd
###### Network interfaces (ip addr) ######
1: lo:  mtu 65536 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ifb0:  mtu 1500 qdisc noop state DOWN group default qlen 32
    link/ether 76:9e:2d:20:b6:71 brd ff:ff:ff:ff:ff:ff
3: ifb1:  mtu 1500 qdisc noop state DOWN group default qlen 32
    link/ether 56:ac:af:0b:f5:1c brd ff:ff:ff:ff:ff:ff
4: eth0:  mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether b8:27:eb:9c:34:b0 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.12/24 brd 192.168.0.255 scope global eth0
       valid_lft forever preferred_lft forever
5: wlan0:  mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 74:da:38:05:17:d2 brd ff:ff:ff:ff:ff:ff
    inet 10.0.242.193/24 brd 10.0.242.255 scope global wlan0
       valid_lft forever preferred_lft forever


###### Network interfaces (ifconfig) ######
eth0: flags=4163  mtu 1500
        inet 192.168.0.12  netmask 255.255.255.0  broadcast 192.168.0.255
        ether b8:27:eb:9c:34:b0  txqueuelen 1000  (Ethernet)
        RX packets 1056  bytes 101005 (98.6 KiB)
        RX errors 0  dropped 1  overruns 0  frame 0
        TX packets 1147  bytes 473773 (462.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        loop  txqueuelen 0  (Local Loopback)
        RX packets 19266  bytes 1191811 (1.1 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 19266  bytes 1191811 (1.1 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4099  mtu 1500
        inet 10.0.242.193  netmask 255.255.255.0  broadcast 10.0.242.255
        ether 74:da:38:05:17:d2  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 1932 (1.8 KiB)
        RX errors 0  dropped 21  overruns 0  frame 0
        TX packets 0  bytes 2160 (2.1 KiB)
        TX errors 0  dropped 2 overruns 0  carrier 0  collisions 0


###### Network netctl profiles (netctl list) ######
  eth0
  wlan0

 eth0 netctl status
--------------------------------------------------------
● netctl@eth0.service - Networking for netctl profile eth0
   Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static)
   Active: inactive (dead)
     Docs: man:netctl.profile(5)

 eth0 netctl profile
--------------------------------------------------------
Description='eth0 connection'
Interface=eth0
ForceConnect=yes
SkipNoCarrier=yes
Connection=ethernet
IP=dhcp
ExecUpPost='/usr/bin/ntpd -gq || true'

 wlan0 netctl status
--------------------------------------------------------
● netctl@wlan0.service - Networking for netctl profile wlan0
   Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static)
   Active: failed (Result: exit-code) since Sun 2016-10-16 23:05:23 CEST; 9s ago
     Docs: man:netctl.profile(5)
  Process: 2982 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
 Main PID: 2982 (code=exited, status=1/FAILURE)

 wlan0 netctl profile
--------------------------------------------------------
Description='wlan0 connection'
Interface=wlan0
ForceConnect=yes
SkipNoCarrier=yes
Connection=wireless
Security=wpa-config
WPAConfigFile='/etc/wpa_supplicant/wpa_supplicant.conf'
AutoWired=yes
IP=static
Address=('10.0.242.193/255.255.255.0')
Gateway='192.168.0.254'
DNS=('212.27.40.241' '212.27.40.240')
ExecUpPost='/usr/bin/ntpd -gq || true'


###### Network wifi status (iwconfig) ######
lo        no wireless extensions.

eth0      no wireless extensions.

ifb0      no wireless extensions.

ifb1      no wireless extensions.

wlan0     unassociated  Nickname:""
          Mode:Managed  Frequency=2.437 GHz  Access Point: Not-Associated
          Sensitivity:0/0
          Retry:off   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0


###### Kernel status (dmesg) ######
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12.26-1-ARCH (nobody@root-armv6-copy) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 PREEMPT Fri Aug 8 17:40:14 MDT 2014
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: BCM2708
[    0.000000] cma: CMA: reserved 8 MiB at 1e800000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c089bdf4, node_mem_map c097b000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1360 bcm2708_fb.fbheight=768 bcm2708.boardrev=0x10 bcm2708.serial=0x89c34b0 smsc95xx.macaddr=B8:27:EB:9C:34:B0 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1fa00000 vc_mem.mem_size=0x20000000  ipv6.disable=1 avoid_safe_mode=1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3 console=tty1 root=/dev/mmcblk0p5 rootfstype=ext4 elevator=noop apparmor=0 security="" rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 485564K/507904K available (6133K kernel code, 334K rwdata, 2096K rodata, 245K init, 858K bss, 22340K reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
    lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0811598   (8230 kB)
      .init : 0xc0812000 - 0xc084f59c   ( 246 kB)
      .data : 0xc0850000 - 0xc08a39ac   ( 335 kB)
       .bss : 0xc08a39ac - 0xc097a2f0   ( 859 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:394
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.000636] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.000661] pid_max: default: 32768 minimum: 301
[    0.001162] Mount-cache hash table entries: 512
[    0.002013] Initializing cgroup subsys memory
[    0.002094] Initializing cgroup subsys devices
[    0.002116] Initializing cgroup subsys freezer
[    0.002133] Initializing cgroup subsys blkio
[    0.002148] Initializing cgroup subsys perf_event
[    0.002183] Initializing cgroup subsys net_prio
[    0.002318] CPU: Testing write buffer coherency: ok
[    0.002781] Setting up static identity map for 0xc05d7458 - 0xc05d74b4
[    0.005048] devtmpfs: initialized
[    0.022538] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    0.023868] xor: measuring software checksum speed
[    0.120346]    arm4regs  :   974.000 MB/sec
[    0.220400]    8regs     :   470.800 MB/sec
[    0.320509]    32regs    :   470.800 MB/sec
[    0.320531] xor: using function: arm4regs (974.000 MB/sec)
[    0.321781] NET: Registered protocol family 16
[    0.327525] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.328185] cpuidle: using governor ladder
[    0.328209] cpuidle: using governor menu
[    0.329026] bcm2708.uart_clock = 0
[    0.331157] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.331180] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.331196] mailbox: Broadcom VideoCore Mailbox driver
[    0.331281] bcm2708_vcio: mailbox at f200b880
[    0.331376] bcm_power: Broadcom power driver
[    0.331398] bcm_power_open() -> 0
[    0.331411] bcm_power_request(0, 8)
[    0.832121] bcm_mailbox_read -> 00000080, 0
[    0.832140] bcm_power_request -> 0
[    0.832387] Serial: AMBA PL011 UART driver
[    0.832523] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
[    0.858906] bio: create slab  at 0
[    1.022618] raid6: int32x1     46 MB/s
[    1.191912] raid6: int32x2     71 MB/s
[    1.362347] raid6: int32x4     91 MB/s
[    1.532705] raid6: int32x8     99 MB/s
[    1.532727] raid6: using algorithm int32x8 (99 MB/s)
[    1.532740] raid6: using intx1 recovery algorithm
[    1.533370] SCSI subsystem initialized
[    1.533717] usbcore: registered new interface driver usbfs
[    1.533832] usbcore: registered new interface driver hub
[    1.534127] usbcore: registered new device driver usb
[    1.536929] Switched to clocksource stc
[    1.561779] FS-Cache: Loaded
[    1.562088] CacheFiles: Loaded
[    1.576312] NET: Registered protocol family 2
[    1.577554] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    1.577695] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    1.577798] TCP: Hash tables configured (established 4096 bind 4096)
[    1.577883] TCP: reno registered
[    1.577911] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.577946] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.578413] NET: Registered protocol family 1
[    1.579066] RPC: Registered named UNIX socket transport module.
[    1.579091] RPC: Registered udp transport module.
[    1.579105] RPC: Registered tcp transport module.
[    1.579117] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.581051] bcm2708_dma: DMA manager at f2007000
[    1.581189] bcm2708_gpio: bcm2708_gpio_probe c085e470
[    1.581677] vc-mem: phys_addr:0x00000000 mem_base=0x1fa00000 mem_size:0x20000000(512 MiB)
[    1.792097] VFS: Disk quotas dquot_6.5.2
[    1.792430] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.794604] FS-Cache: Netfs 'nfs' registered for caching
[    1.795672] NFS: Registering the id_resolver key type
[    1.795794] Key type id_resolver registered
[    1.795814] Key type id_legacy registered
[    1.797496] bio: create slab  at 1
[    1.799042] Btrfs loaded
[    1.800163] aufs 3.12.x-20140804
[    1.800218] msgmni has been set to 964
[    1.802572] async_tx: api initialized (async)
[    1.802941] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.803286] io scheduler noop registered (default)
[    1.803311] io scheduler deadline registered
[    1.803613] io scheduler cfq registered
[    1.804971] BCM2708FB: allocated DMA memory 5ec00000
[    1.805040] BCM2708FB: allocated DMA channel 0 @ f2007000
[    1.816827] Console: switching to colour frame buffer device 170x48
[    1.825232] uart-pl011 dev:f1: no DMA platform data
[    1.825918] vc-cma: Videocore CMA driver
[    1.825940] vc-cma: vc_cma_base      = 0x00000000
[    1.825955] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.825967] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.836331] brd: module loaded
[    1.842424] loop: module loaded
[    1.842735] vchiq: vchiq_init_state: slot_zero = 0xde800000, is_master = 0
[    1.843685] Loading iSCSI transport class v2.0-870.
[    1.846548] usbcore: registered new interface driver ax88179_178a
[    1.846683] usbcore: registered new interface driver smsc95xx
[    1.846916] usbcore: registered new interface driver cdc_ncm
[    1.847205] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.047560] Core Release: 2.80a
[    2.047595] Setting default values for core params
[    2.047641] Finished setting default values for core params
[    2.247699] Using Buffer DMA mode
[    2.247725] Periodic Transfer Interrupt Enhancement - disabled
[    2.247739] Multiprocessor Interrupt Enhancement - disabled
[    2.247754] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.247772] Dedicated Tx FIFOs mode
[    2.248166] WARN::dwc_otg_hcd_init:1042: FIQ DMA bounce buffers: virt = 0xdec14000 dma = 0x5ec14000 len=9024
[    2.248203] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
[    2.248230] dwc_otg: Microframe scheduler enabled
[    2.248292] WARN::hcd_init:473: FIQ at 0xc04590d8
[    2.248312] WARN::hcd_init:474: FIQ ASM at 0xc045938c length 36
[    2.248344] WARN::hcd_init:500: MPHI regs_base at 0xdf806000
[    2.248375] dwc_otg bcm2708_usb: DWC OTG Controller
[    2.248429] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    2.248524] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    2.248566] Init: Port Power? op_state=1
[    2.248578] Init: Power Port (0)
[    2.248923] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.248951] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.248970] usb usb1: Product: DWC OTG Controller
[    2.248988] usb usb1: Manufacturer: Linux 3.12.26-1-ARCH dwc_otg_hcd
[    2.249006] usb usb1: SerialNumber: bcm2708_usb
[    2.249878] hub 1-0:1.0: USB hub found
[    2.249973] hub 1-0:1.0: 1 port detected
[    2.250469] dwc_otg: FIQ enabled
[    2.250488] dwc_otg: NAK holdoff enabled
[    2.250501] dwc_otg: FIQ split-transaction FSM enabled
[    2.250523] Module dwc_common_port init
[    2.250999] usbcore: registered new interface driver usb-storage
[    2.251351] mousedev: PS/2 mouse device common for all mice
[    2.251835] md: linear personality registered for level -1
[    2.251859] md: raid0 personality registered for level 0
[    2.251874] md: raid1 personality registered for level 1
[    2.251887] md: raid10 personality registered for level 10
[    2.252252] md: raid6 personality registered for level 6
[    2.252275] md: raid5 personality registered for level 5
[    2.252289] md: raid4 personality registered for level 4
[    2.252303] md: multipath personality registered for level -4
[    2.252317] md: faulty personality registered for level -5
[    2.252793] device-mapper: uevent: version 1.0.3
[    2.253345] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[    2.254242] device-mapper: multipath: version 1.6.0 loaded
[    2.254273] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.254289] device-mapper: multipath queue-length: version 0.1.0 loaded
[    2.254304] device-mapper: multipath service-time: version 0.2.0 loaded
[    2.254324] device-mapper: raid: Loading target version 1.5.2
[    2.254581] bcm2835-cpufreq: min=700000 max=700000 cur=700000
[    2.254690] bcm2835-cpufreq: switching to governor ondemand
[    2.254708] bcm2835-cpufreq: switching to governor ondemand
[    2.254890] sdhci: Secure Digital Host Controller Interface driver
[    2.254907] sdhci: Copyright(c) Pierre Ossman
[    2.255003] sdhci: Enable low-latency mode
[    2.296990] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    2.297279] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    2.297388] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.297413] ledtrig-cpu: registered to indicate activity on CPUs
[    2.297580] hidraw: raw HID events driver (C) Jiri Kosina
[    2.298126] usbcore: registered new interface driver usbhid
[    2.298146] usbhid: USB HID core driver
[    2.298945] zram: Created 1 device(s) ...
[    2.299536] TCP: cubic registered
[    2.299565] Initializing XFRM netlink socket
[    2.299610] NET: Registered protocol family 17
[    2.299808] Key type dns_resolver registered
[    2.307940] registered taskstats version 1
[    2.314338] md: Waiting for all devices to be available before autodetect
[    2.314367] md: If you don't use raid, use raid=noautodetect
[    2.319737] md: Autodetecting RAID arrays.
[    2.319768] md: Scanned 0 and added 0 devices.
[    2.321889] md: autorun ...
[    2.321909] md: ... autorun DONE.
[    2.322318] Waiting for root device /dev/mmcblk0p5...
[    2.447152] Indeed it is in host mode hprt0 = 00021501
[    2.518857] mmc0: could read SD Configuration register (SCR) at the 2th attempt
[    2.526194] mmc0: new high speed SDHC card at address 59b4
[    2.527131] mmcblk0: mmc0:59b4 USDU1 14.9 GiB
[    2.529505]  mmcblk0: p1 p2 < p5 >
[    2.627156] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.627341] Indeed it is in host mode hprt0 = 00001101
[    2.667283] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[    2.667384] VFS: Mounted root (ext4 filesystem) on device 179:5.
[    2.708640] devtmpfs: mounted
[    2.709527] Freeing unused kernel memory: 244K (c0812000 - c084f000)
[    2.827426] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.827482] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.828498] hub 1-1:1.0: USB hub found
[    2.828659] hub 1-1:1.0: 5 ports detected
[    3.107203] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.147484] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[    3.148255] systemd[1]: Detected architecture 'arm'.
[    3.207463] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.207501] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.210556] smsc95xx v1.0.4
[    3.271211] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:9c:34:b0
[    3.347298] usb 1-1.4: new high-speed USB device number 4 using dwc_otg
[    3.403529] IPv6: Loaded, but administratively disabled, reboot required to enable
[    3.403730] systemd[1]: Inserted module 'ipv6'
[    3.428006] systemd[1]: Set hostname to .
[    3.448842] usb 1-1.4: New USB device found, idVendor=7392, idProduct=7811
[    3.448878] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.448900] usb 1-1.4: Product: 802.11n WLAN Adapter
[    3.448922] usb 1-1.4: Manufacturer: Realtek
[    3.448940] usb 1-1.4: SerialNumber: 00e04c000001
[    3.777241] usb 1-1.3: new low-speed USB device number 5 using dwc_otg
[    3.895242] usb 1-1.3: New USB device found, idVendor=1a2c, idProduct=0c23
[    3.895279] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.895300] usb 1-1.3: Product: USB Keyboard
[    3.895318] usb 1-1.3: Manufacturer: USB
[    3.911160] input: USB USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
[    3.911868] hid-generic 0003:1A2C:0C23.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-bcm2708_usb-1.3/input0
[    3.927455] input: USB USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.1/input/input1
[    3.929292] hid-generic 0003:1A2C:0C23.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keyboard] on usb-bcm2708_usb-1.3/input1
[    4.303766] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    4.315438] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    4.316429] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.316779] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[    4.317974] systemd[1]: Starting Remote File Systems.
[    4.318921] systemd[1]: Reached target Remote File Systems.
[    4.319402] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    4.320216] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.320530] systemd[1]: Starting Paths.
[    4.321389] systemd[1]: Reached target Paths.
[    4.321722] systemd[1]: Starting Encrypted Volumes.
[    4.322574] systemd[1]: Reached target Encrypted Volumes.
[    4.323113] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    4.325001] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.325404] systemd[1]: Starting Swap.
[    4.326386] systemd[1]: Reached target Swap.
[    4.326726] systemd[1]: Expecting device dev-mmcblk0p1.device...
[    4.327747] systemd[1]: Starting Root Slice.
[    4.401511] systemd[1]: Created slice Root Slice.
[    4.401874] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    4.403200] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.403637] systemd[1]: Starting udev Control Socket.
[    4.404923] systemd[1]: Listening on udev Control Socket.
[    4.405276] systemd[1]: Starting Journal Socket (/dev/log).
[    4.405365] systemd[1]: Socket service systemd-journald.service not loaded, refusing.
[    4.407220] systemd[1]: Failed to listen on Journal Socket (/dev/log).
[    4.407646] systemd[1]: Starting Delayed Shutdown Socket.
[    4.408981] systemd[1]: Listening on Delayed Shutdown Socket.
[    4.409427] systemd[1]: Starting udev Kernel Socket.
[    4.410579] systemd[1]: Listening on udev Kernel Socket.
[    4.410932] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    4.412270] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.412664] systemd[1]: Starting Journal Socket.
[    4.412752] systemd[1]: Socket service systemd-journald.service not loaded, refusing.
[    4.414410] systemd[1]: Failed to listen on Journal Socket.
[    4.415009] systemd[1]: Starting System Slice.
[    4.418734] systemd[1]: Created slice System Slice.
[    4.419267] systemd[1]: Started File System Check on Root Device.
[    4.419649] systemd[1]: Mounting Temporary Directory...
[    4.427383] systemd[1]: Starting system-netctl\x2difplugd.slice.
[    4.437386] systemd[1]: Created slice system-netctl\x2difplugd.slice.
[    4.437752] systemd[1]: Starting system-getty.slice.
[    4.442740] systemd[1]: Created slice system-getty.slice.
[    4.469277] systemd[1]: Started Set Up Additional Binary Formats.
[    4.469734] systemd[1]: Starting udev Coldplug all Devices...
[    4.500688] systemd[1]: Starting Load Kernel Modules...
[    4.534031] systemd[1]: Mounted Huge Pages File System.
[    4.534516] systemd[1]: Starting Setup Virtual Console...
[    4.561435] systemd[1]: Mounting Debug File System...
[    4.638328] systemd[1]: Mounting POSIX Message Queue File System...
[    4.655833] systemd-modules-load[63]: Module 'nfs' is builtin
[    4.674524] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.698492] bcm2708_rng_init=df80a000
[    4.701620] systemd-modules-load[63]: Inserted module 'bcm2708_rng'
[    4.752931] systemd[1]: Starting Slices.
[    4.771702] systemd[1]: Reached target Slices.
[    4.772247] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.847472] systemd[1]: Mounted POSIX Message Queue File System.
[    4.852717] systemd[1]: Mounted Debug File System.
[    4.857999] systemd[1]: Mounted Temporary Directory.
[    4.868424] systemd-modules-load[63]: Inserted module 'snd_bcm2835'
[    4.908151] systemd[1]: Started Setup Virtual Console.
[    4.917537] systemd[1]: Started Load Kernel Modules.
[    4.931933] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.256747] systemd[1]: Started udev Coldplug all Devices.
[    5.406195] EXT4-fs (mmcblk0p5): Mount option "nouser_xattr" will be removed by 3.5
Contact linux-ext4@vger.kernel.org if you think we should keep it.

[    5.406270] EXT4-fs (mmcblk0p5): re-mounted. Opts: nouser_xattr,errors=remount-ro
[    5.435073] systemd[1]: Started Remount Root and Kernel File Systems.
[    5.868637] systemd[1]: Started Rebuild Dynamic Linker Cache.
[    5.869064] systemd[1]: Started Rebuild Hardware Database.
[    5.869328] systemd[1]: Starting Load/Save Random Seed...
[    5.880755] systemd[1]: Started Create System Users.
[    5.881295] systemd[1]: Started First Boot Wizard.
[    5.882226] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.902177] systemd[1]: Mounted FUSE Control File System.
[    5.903521] systemd[1]: Mounting Configuration File System...
[    5.951535] systemd[1]: Starting Apply Kernel Variables...
[    6.098873] systemd[1]: Mounted Configuration File System.
[    6.109678] systemd[1]: Started Load/Save Random Seed.
[    6.117201] systemd[1]: Started Create Static Device Nodes in /dev.
[    6.125706] systemd[1]: Started Apply Kernel Variables.
[    6.405811] systemd[1]: Starting udev Kernel Device Manager...
[    6.425144] systemd[1]: Starting Local File Systems (Pre).
[    6.431389] systemd[1]: Reached target Local File Systems (Pre).
[    6.431920] systemd[1]: Mounting /var/log...
[    6.447127] systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
[    6.473723] systemd-udevd[89]: starting version 216
[    6.521573] systemd[1]: Started udev Kernel Device Manager.
[    6.536341] systemd[1]: Mounted /var/log.
[    6.654968] systemd[1]: Mounting /var/log/runeaudio...
[    6.731518] systemd[1]: Mounted /var/log/runeaudio.
[    7.177591] bcm2708_i2c_init_pinmode(0,0)
[    7.177623] bcm2708_i2c_init_pinmode(0,1)
[    7.177982] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100000)
[    7.190403] bcm2708_i2c_init_pinmode(1,2)
[    7.190443] bcm2708_i2c_init_pinmode(1,3)
[    7.191142] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
[    7.233817] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[    7.240741] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
[    7.628808] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
[    7.844325] systemd[1]: Found device SMSC9512/9514 Fast Ethernet Adapter.
[    7.884902] systemd[1]: Found device /dev/mmcblk0p1.
[    7.885997] systemd[1]: Mounting /boot...
[    8.011199] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    8.031395] systemd[1]: Mounted /boot.
[    8.034437] systemd[1]: Starting Local File Systems.
[    8.053667] systemd[1]: Reached target Local File Systems.
[    8.054248] systemd[1]: Started Rebuild Journal Catalog.
[    8.054968] systemd[1]: Started Update is Completed.
[    8.055223] systemd[1]: Starting Create Volatile Files and Directories...
[    8.297416] systemd[1]: Started Create Volatile Files and Directories.
[    8.443724] systemd[1]: Starting Update UTMP about System Boot/Shutdown...
[    8.622018] systemd[1]: Started Update UTMP about System Boot/Shutdown.
[    8.826737] systemd[1]: Starting System Initialization.
[    8.842025] systemd[1]: Reached target System Initialization.
[    8.842764] systemd[1]: Starting Daily verification of password and group files.
[    8.845794] systemd[1]: Started Daily verification of password and group files.
[    8.846146] systemd[1]: Starting Daily rotation of log files.
[    8.851297] systemd[1]: Started Daily rotation of log files.
[    8.851684] systemd[1]: Starting Avahi mDNS/DNS-SD Stack Activation Socket.
[    8.863220] systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[    8.863619] systemd[1]: Starting D-Bus System Message Bus Socket.
[    8.874472] systemd[1]: Listening on D-Bus System Message Bus Socket.
[    8.874888] systemd[1]: Starting Daily Cleanup of Temporary Directories.
[    8.875212] systemd[1]: Started Daily Cleanup of Temporary Directories.
[    8.875488] systemd[1]: Starting Timers.
[    8.880078] systemd[1]: Reached target Timers.
[    8.880661] systemd[1]: Started Manage Sound Card State (restore and store).
[    8.880986] systemd[1]: Starting Restore Sound Card State...
[    8.895023] systemd[1]: Starting RPCbind Server Activation Socket.
[    8.922092] systemd[1]: Listening on RPCbind Server Activation Socket.
[    8.922589] systemd[1]: Starting Sockets.
[    8.938097] systemd[1]: Reached target Sockets.
[    8.938556] systemd[1]: Starting Basic System.
[    8.952558] systemd[1]: Reached target Basic System.
[    8.953076] systemd[1]: Starting A high performance web server and a reverse proxy server...
[    9.004200] systemd[1]: Started SSH Key Generation.
[    9.004651] systemd[1]: Starting OpenSSH Daemon...
[    9.095025] systemd[1]: Started OpenSSH Daemon.
[    9.095677] systemd[1]: Starting Advanced key-value store...
[    9.195067] systemd[1]: Started Advanced key-value store.
[    9.195767] systemd[1]: Starting RuneAudio Playback Worker After=network.target...
[    9.297507] systemd[1]: Started RuneAudio Playback Worker After=network.target.
[    9.298088] systemd[1]: Starting The PHP FastCGI Process Manager...
[    9.399020] systemd[1]: Starting Avahi DNS Configuration Daemon...
[    9.517953] systemd[1]: Started Avahi DNS Configuration Daemon.
[    9.518676] systemd[1]: Starting Automatic wired network connection using netctl profiles...
[    9.629331] systemd[1]: Started Automatic wired network connection using netctl profiles.
[    9.634068] systemd[1]: Starting Permit User Sessions...
[    9.676783] systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
[    9.743953] systemd[1]: Starting D-Bus System Message Bus...
[    9.747614] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    9.857372] systemd[1]: Started D-Bus System Message Bus.
[   10.415912] systemd[1]: Started Avahi mDNS/DNS-SD Stack.
[   10.420004] systemd[1]: Starting RPC bind service...
[   10.565349] systemd[1]: Started Restore Sound Card State.
[   10.668502] systemd[1]: Started Permit User Sessions.
[   10.727627] systemd[1]: Started RPC bind service.
[   11.022832] systemd[1]: Started A high performance web server and a reverse proxy server.
[   11.097316] systemd[1]: Started The PHP FastCGI Process Manager.
[   11.317492] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   11.768991] usbcore: registered new interface driver rtl8192cu
[   12.018492] systemd[1]: Starting Getty on tty1...
[   12.072219] systemd[1]: Started Getty on tty1.
[   12.072830] systemd[1]: Starting Login Prompts.
[   12.077158] systemd[1]: Reached target Login Prompts.
[   12.077638] systemd[1]: Starting Multi-User System.
[   12.087438] systemd[1]: Reached target Multi-User System.
[   12.087900] systemd[1]: Starting RuneAudio System Worker...
[   12.125386] systemd[1]: Started RuneAudio System Worker.
[   12.127736] systemd[1]: Starting Graphical Interface.
[   12.144979] systemd[1]: Reached target Graphical Interface.
[   12.157484] systemd[1]: Startup finished in 3.066s (kernel) + 9.083s (userspace) = 12.150s.
[   13.677847] systemd[1]: Stopping The PHP FastCGI Process Manager...
[   13.808250] systemd[1]: Stopped The PHP FastCGI Process Manager.
[   13.824933] cfg80211: Calling CRDA to update world regulatory domain
[   14.387738] systemd[1]: Starting Music Player Daemon...
[   14.394343] systemd[1]: Started Music Player Daemon.
[   15.054037] systemd[1]: Stopping Music Player Daemon...
[   15.092003] systemd[1]: Stopped Music Player Daemon.
[   15.607800] systemd[1]: Starting Samba NetBIOS name server...
[   15.614736] systemd[1]: Started Samba NetBIOS name server.
[   16.122911] systemd[1]: Starting Samba NetBIOS name server...
[   16.140083] systemd[1]: Started Samba NetBIOS name server.
[   16.529720] systemd[1]: Starting Music Player Daemon...
[   16.536595] systemd[1]: Started Music Player Daemon.
[   18.526504] systemd[1]: Stopped Music Player Daemon.
[   18.754088] systemd[1]: Starting Sound Card.
[   18.754409] systemd[1]: Reached target Sound Card.
[   19.677296] systemd[1]: Starting Music Player Daemon...
[   19.684050] systemd[1]: Started Music Player Daemon.
[   20.685842] systemd[1]: Stopping Music Player Daemon...
[   20.727879] systemd[1]: Stopped Music Player Daemon.
[   20.980460] systemd[1]: Starting Shairport AirTunes receiver...
[   20.995101] systemd[1]: Started Shairport AirTunes receiver.
[   21.229982] systemd[1]: Starting Usb Automount (udevil)...
[   21.236806] systemd[1]: Started Usb Automount (udevil).
[   22.047602] systemd[1]: Starting Music Player Daemon...
[   22.054392] systemd[1]: Started Music Player Daemon.
[   22.903685] usbcore: registered new interface driver snd-usb-audio
[   23.466046] bcm2835-cpufreq: switching to governor performance
[   23.466084] bcm2835-cpufreq: switching to governor performance
[   23.950235] systemd[1]: Starting The PHP FastCGI Process Manager...
[   24.794685] systemd[1]: Started The PHP FastCGI Process Manager.
[   26.155915] systemd[1]: Time has been changed
[   27.944159] systemd[1]: Stopped Music Player Daemon.
[   29.172816] systemd[1]: Starting Music Player Daemon...
[   29.199156] systemd[1]: Started Music Player Daemon.
[   30.852197] systemd[1]: Starting system-wpa_supplicant.slice.
[   30.855519] systemd[1]: Created slice system-wpa_supplicant.slice.
[   30.856168] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[   30.863617] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[   31.070958] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[   31.086553] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[   33.698590] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[   33.705476] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[   33.828488] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[   33.834238] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[   34.439583] systemd[1]: Stopped Music Player Daemon.
[   34.604243] systemd[1]: Starting system-netctl.slice.
[   34.609401] systemd[1]: Created slice system-netctl.slice.
[   34.610126] systemd[1]: Starting Networking for netctl profile wlan0...
[   37.806172] rtw_wx_set_mlme
[   37.806211] rtw_wx_set_mlme, cmd=0, reason=3
[   38.040447] systemd[1]: netctl@wlan0.service: main process exited, code=exited, status=1/FAILURE
[   38.048348] systemd[1]: Failed to start Networking for netctl profile wlan0.
[   38.061790] systemd[1]: Unit netctl@wlan0.service entered failed state.
[   38.411483] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[   38.428875] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[   38.433007] systemd[1]: Starting Network.
[   38.433277] systemd[1]: Reached target Network.
[   38.436640] systemd[1]: Starting Music Player Daemon...
[   38.446014] systemd[1]: Started Music Player Daemon.
[   38.656408] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[   38.668101] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  134.541363] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  134.558562] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  134.659867] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  134.677917] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  135.290893] systemd[1]: Starting Networking for netctl profile wlan0...
[  138.429955] rtw_wx_set_mlme
[  138.429993] rtw_wx_set_mlme, cmd=0, reason=3
[  138.664683] systemd[1]: netctl@wlan0.service: main process exited, code=exited, status=1/FAILURE
[  138.679730] systemd[1]: Failed to start Networking for netctl profile wlan0.
[  138.682886] systemd[1]: Unit netctl@wlan0.service entered failed state.
[  139.027265] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  139.034373] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  139.163324] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  139.169327] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  155.652205] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  155.669005] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  155.765590] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  155.787934] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  156.404303] systemd[1]: Starting Networking for netctl profile wlan0...
[  159.166836] rtw_wx_set_mlme
[  159.167046] rtw_wx_set_mlme, cmd=0, reason=3
[  159.403863] systemd[1]: netctl@wlan0.service: main process exited, code=exited, status=1/FAILURE
[  159.416378] systemd[1]: Failed to start Networking for netctl profile wlan0.
[  159.427859] systemd[1]: Unit netctl@wlan0.service entered failed state.
[  159.762160] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  159.779253] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  159.880981] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  159.898133] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  166.848155] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  166.868026] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  166.964384] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  166.987891] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  167.594594] systemd[1]: Starting Networking for netctl profile wlan0...
[  170.499542] rtw_wx_set_mlme
[  170.499580] rtw_wx_set_mlme, cmd=0, reason=3
[  170.733374] systemd[1]: netctl@wlan0.service: main process exited, code=exited, status=1/FAILURE
[  170.738363] systemd[1]: Failed to start Networking for netctl profile wlan0.
[  170.752475] systemd[1]: Unit netctl@wlan0.service entered failed state.
[  171.104083] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  171.111751] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  171.236427] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  171.242482] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  177.628929] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  177.636055] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  177.750502] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  177.768057] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  178.383310] systemd[1]: Starting Networking for netctl profile wlan0...
[  181.325280] rtw_wx_set_mlme
[  181.325318] rtw_wx_set_mlme, cmd=0, reason=3
[  181.559776] systemd[1]: netctl@wlan0.service: main process exited, code=exited, status=1/FAILURE
[  181.568506] systemd[1]: Failed to start Networking for netctl profile wlan0.
[  181.580676] systemd[1]: Unit netctl@wlan0.service entered failed state.
[  181.921395] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  181.940248] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  182.053836] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  182.060735] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  189.077854] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  189.084939] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  189.200718] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  189.217860] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  189.828851] systemd[1]: Starting Networking for netctl profile wlan0...
[  192.721277] rtw_wx_set_mlme
[  192.721315] rtw_wx_set_mlme, cmd=0, reason=3
[  192.956014] systemd[1]: netctl@wlan0.service: main process exited, code=exited, status=1/FAILURE
[  192.969258] systemd[1]: Failed to start Networking for netctl profile wlan0.
[  192.975134] systemd[1]: Unit netctl@wlan0.service entered failed state.
[  193.318275] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  193.325480] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  193.453463] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  193.460427] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  200.208997] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  200.215956] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  200.323080] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  200.347933] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  200.952864] systemd[1]: Starting Networking for netctl profile wlan0...
[  209.918068] rtw_wx_set_mlme
[  209.918109] rtw_wx_set_mlme, cmd=0, reason=3
[  233.472593] systemd[1]: netctl@wlan0.service: main process exited, code=exited, status=1/FAILURE
[  233.478232] systemd[1]: Failed to start Networking for netctl profile wlan0.
[  233.493475] systemd[1]: Unit netctl@wlan0.service entered failed state.
[  233.832483] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  233.849239] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  233.963485] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  233.973559] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  242.272963] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  242.281168] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  242.391589] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  242.407958] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  243.020762] systemd[1]: Starting Networking for netctl profile wlan0...
[  268.892680] systemd[1]: netctl@wlan0.service: main process exited, code=exited, status=1/FAILURE
[  268.898188] systemd[1]: Failed to start Networking for netctl profile wlan0.
[  268.914266] systemd[1]: Unit netctl@wlan0.service entered failed state.
[  269.241181] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  269.258826] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  269.362321] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  269.372691] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  401.739109] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  401.746217] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  401.868259] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  401.874155] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.
[  402.486433] systemd[1]: Starting Networking for netctl profile wlan0...
[  425.500858] systemd[1]: netctl@wlan0.service: main process exited, code=exited, status=1/FAILURE
[  425.508927] systemd[1]: Failed to start Networking for netctl profile wlan0.
[  425.514453] systemd[1]: Unit netctl@wlan0.service entered failed state.
[  425.866468] systemd[1]: Starting WPA supplicant daemon (interface-specific version)...
[  425.873896] systemd[1]: Started WPA supplicant daemon (interface-specific version).
[  425.992621] systemd[1]: wpa_supplicant@wlan0.service: main process exited, code=exited, status=255/n/a
[  425.999741] systemd[1]: Unit wpa_supplicant@wlan0.service entered failed state.

###### PHP backend ######
php version:	5.5.17
debug level:	0


Debug data collected in 3.029 seconds.     
I also attached the rune audio debug file.
Thank you for your help.
hondagx35

Hi Bastien,

you have a RP1 right?

Please start with a fresh image and update to the nightly builds.

Frank
Bastien

Hi hondagx35,

Thank you for your time and answer.

What do your mean by "fresh image" ?
Is this the latest image : https://sourceforge.net/projects/runeaudio/files/Images/Raspberry%20Pi/RuneAudio_rpi_0.3-beta_20141029_2GB.img.gz/download
Or is there an other one ?

I will definetly update to the night builds.

Thx again.

Bastien
hondagx35

Hi Bastien,

yes this is the correct image.

Frank
Bastien

Everything works perfectly.
I update and install the nightlybilds via ssh.
Then i use this guideline : http://www.runeaudio.com/documentation/troubleshooting/rpi-troubleshooting/

Thank you so much !
Bastien

Yes i confirm i did something wrong cause i can't access anymore to my runeaudio.local
hondagx35

Hi Bastien,
Yes i confirm i did something wrong cause i can't access anymore to my runeaudio.local
After updating to the nightly builds?
Are you using a windows PC as host?
Try to find out the IP of your device (see your router).

Frank