McFly HI Everyone! Looking for help now... Just got my pi3 with hifiberry digi+ hat. Also, WD PiDrive 1TB HDD to be added to the equation later on. All excited, I followed all instructions (with win32diskimager) to write image file on my sd card (4gb kingston, FAT32) and get the thing going. As I plug the card in and put the juice...nothing. Screen is dead blank. Nothing. - added this line in config : device_tree_overlay=hifiberry-digi - red light steady - green light slowly blinking - PIDrive 3A PSU I'm not a proficient programmer, more of a DIYer / audio enthusiast I installed OS on sd cards before...but now, I have no clues! Any issues with img files known?
hondagx35 Hi McFly, i would try to get it working without the hifiberry card and hdd first. You also can try this image. Frank
McFly thanks! I tried the image you refer to, without success. I will now try without the digi+ and the HDD. À suivre...
McFly Just tried with a new SD card, pi3 alone with hdmi and a monitor plugged in the DVI port. The same blank screen, with some flickering every 5-6 seconds. Could it be anything to do with config file, hdmi modes or something?
McFly Finally works! After some search about display options, modified/enabled those lines in the config file : hdmi_drive= 1 hdmi_group=2 hdmi_mode=35
hondagx35 Hi McFly, great to hear that it now works for you. So I guess you did not try the web interface before. Rune Audio is designed manly as a headless player (remote web Interface). The HDMI output is normaly not the main interface. If you like to use the HDMI port with a monitor and mouse attached you also need to enable the cursor. Please search the forum if this is needed. Frank
McFly Thanks, I did not know I could use a mouse and a screen! Using it headless so far. Works perfectly
