Just performed this 'update'. It will boot and I was able to get the latest kernel. For me is it 4.9.14-1 and it has many more drivers for later version DACs. I had to do one more 'modification' which was not in the recipe on page 1. I had to comment out the 2 lines in the config.txt
# RuneAudio settings
#cmdline=cmdline_linux-arch-rpi_3.12.26-1-ARCH.txt
#kernel=linux-arch-rpi_3.12.26-1-ARCH.img
Currently, it will boot and start to run, after a while the music gets choppy then it will eventually hang and require a reboot. It has been rebooted for 24 minutes and now will not play any streams nor any music on the server. This is with the current kernel and also running the /dev branch of Rune updated via git. No mods burned the 0.3 version then updated it clean.
Is there a complete 0.4 image with a newer kernel, which will allow newer dacs, that I can burn?
This is for a Pi B+ this is what I am running:
================ www.runeaudio.com ================
RuneOs: 0.3-beta (build 20141029)
RuneUI: 1.3
Hw-env: RaspberryPi
root@deskrune:~ # uname -a
Linux deskrune 4.9.14-1-ARCH #1 SMP Tue Mar 14 00:45:48 UTC 2017 armv6l GNU/Linux
Edit: i tried this at home with my Pi2 (with a 5122 DAC) and it seems to work correctly after a kernel update. though the UI does seem to have a bit more lag than the older kernel (this is on an ethernet connection, not wifi). I have another Pi B+ but with a 5102 chip (hifiberry DAC) and it seems to work correctly with the same kernel updated. When I put the original V0.3 back on my B+ with the 5122 (iqaudio dac+ driver) it works fine (even 12 hrs later). With the updated kernel, it eventually gets choppy then locks up. Any clues as to what is going on? I have 2 SD cards and can swap to diagnose or troubleshoot if I knew what to look for.
Gearhead
