Thanks! Cyberduck is much easier to navigate the Pi with!
I was able to change the /etc/udevil/udevil.conf file as follows:
default_options = nosuid, noexec, nodev, noatime
default_options_file = nosuid, noexec, nodev, noatime, uid=$UID, gid=$GID, rw
# mount iso9660 with 'ro' to prevent mount read-only warning
default_options_iso9660 = nosuid, noexec, nodev, noatime, uid=$UID, gid=$GID, rw, utf8
default_options_udf = nosuid, noexec, nodev, noatime, uid=$UID, gid=$GID
default_options_vfat = rw, iocharset=utf8, noatime, uid=$UID, gid=$GID
default_options_exfat = rw, nonempty, uid=$UID, gid=$GID
default_options_hfsplus = rw, uid=$UID, gid=$GID
default_options_msdos = nosuid, noexec, nodev, noatime, fmask=0133, dmask=0022, uid=$UID, gid=$GID
default_options_umsdos = nosuid, noexec, nodev, noatime, fmask=0133, dmask=0022, uid=$UID, gid=$GID
default_options_ntfs = nosuid, noexec, nodev, noatime, fmask=0133, uid=$UID, gid=$GID, utf8
default_options_cifs = nosuid, noexec, nodev, uid=$UID, gid=$GID
default_options_smbfs = nosuid, noexec, nodev, uid=$UID, gid=$GID
default_options_sshfs = nosuid, noexec, nodev, noatime, uid=$UID, gid=$GID, nonempty, allow_other
default_options_curlftpfs = nosuid, noexec, nodev, noatime, uid=$UID, gid=$GID, nonempty, allow_other
default_options_ftpfs = nosuid, noexec, nodev, noatime, uid=$UID, gid=$GID
default_options_davfs = nosuid, noexec, nodev, uid=$UID, gid=$GID
default_options_tmpfs = nosuid, noexec, nodev, noatime, uid=$UID, gid=$GID
default_options_ramfs = nosuid, noexec, nodev, noatime, uid=$UID, gid=$GID
This seems to have updated the permissions as reflected in my debug, but not the mount on the actual drive. Unfortunately I am still not able to read or write access to this drive in finder or Cyberduck. I get the error ' Failure. Please contact your web hosting service provider for assistance.' in Cyberduck if i try to add or delete a file.
In finder logging in using the root/rune user pass I get the following error: 'Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator'. If I connect as a guest I can see the files but not write.
As you can see in the bottom line my 1 TB hd is still set to 'ro' while the rest were manually changed to 'rw'. Also, I have changes all permissions on my external hard drive to read/write.
###### Filesystem mounts ######
/dev/root / ext4 rw,relatime,data=ordered 0 0
devtmpfs /dev devtmpfs rw,relatime,size=468104k,nr_inodes=117026,mode=755 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0
tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0
cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
cgroup /sys/fs/cgroup/net_cls,net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0
cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
cgroup /sys/fs/cgroup/bfqio cgroup rw,nosuid,nodev,noexec,relatime,bfqio 0 0
cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=32,pgrp=1,timeout=0,minproto=5,maxproto=5,direct 0 0
tmpfs /tmp tmpfs rw 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
mqueue /dev/mqueue mqueue rw,relatime 0 0
configfs /sys/kernel/config configfs rw,relatime 0 0
logs /var/log tmpfs rw,nosuid,nodev,noatime,size=5120k 0 0
rune-logs /var/log/runeaudio tmpfs rw,nosuid,nodev,noatime,size=5120k 0 0
/dev/mmcblk0p1 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro 0 0
/dev/sda2 /mnt/MPD/USB/1TB hfsplus ro,nosuid,nodev,noexec,noatime,umask=22,uid=1000,gid=92,nls=utf8 0 0
Scanning my debug info i see this at the bottom:
[ 22.410461] hfsplus: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
Should i switch to a non-journaled format? Is this the issue? Can/should I force the existing drive and if so how?
So some follow up questions:
Is there a setting on my hard drive or computer I need to make to access the server? Very basic, probably but I'm not very network savvy.
Is there a recommended format that i could use to reformat my drive for easier compatibility with Rune?
Also, do people generally use finder or once they are able to gain access or Cyberduck to upload and delete files on USB drives?
Thanks!
