RPI3 + Hifiberry Amp+

abtt

Hello,

I have a raspberry pi 3 and hifiberry amp amp + but I can not run runeaudio ( with the runeaudio for raspberry). Is it compatible? In settings, I can't see amp +

I tried this tutorial : http://www.ridgesolutions.ie/index.php/2015/04/29/runeaudio-working-with-hifiberry-amp-on-raspberrypi/

but when I restart my raspberry, the network is down

rentaclaus

No need to poke around with difficult tasks

latest runeaudio can use hifiberry amp + by default

simply uncomment

#device_tree_overlay=hifiberry-amp

in /boot/config.txt

have a look at http://www.runeaudio.com/documentation/troubleshooting/rpi-troubleshooting/ if you are in doubt.

don't forget to enable hifiberry amp in RuneUi
http://www.runeaudio.com/documentation/runeui/mpd/

abtt

rentaclaus wroteNo need to poke around with difficult tasks
latest runeaudio can use hifiberry amp + by default

simply uncomment

#device_tree_overlay=hifiberry-amp

in /boot/config.txt

have a look at http://www.runeaudio.com/documentation/troubleshooting/rpi-troubleshooting/ if you are in doubt.

don't forget to enable hifiberry amp in RuneUi
http://www.runeaudio.com/documentation/runeui/mpd/

thank you very much, it works