4" LCD waveshare with RP3

TheOldMan

Hi all,
I have a RP3 with @[deleted] image. https://onedrive.live.com/redir?resid=79468AF54EBC60B1!132&authkey=!AECsF7aem35ld4A&ithint=file%2cgz
I have a LCD 4 inch http://www.waveshare.com/4inch-rpi-lcd-a.htm
I follow the guide in this link: http://www.waveshare.com/wiki/4inch_RPi_LCD_%28A%29

the LCD work, but RuneUI failure, LCD show nginx 404 Not found.

Please help me to fix it.

Thanks !

Tom

hondagx35

Hi Tom,

first a few questions:

- any reason for using this image and not the official one?
- does it work with a remote browser (http://runeaudio or IP address)?

Frank

TheOldMan

hondagx35 wroteHi Tom,

first a few questions:

- any reason for using this image and not the official one?
- does it work with a remote browser (http://runeaudio or IP address)?

Frank

Hi Frank,
- while setting up my RP3, I read many posts in this forum and in a post, I see a guide for a member to setup 2.2" LCD
#34962

- it works only in IP address, does not work with http://runeaudio.

TheOldMan

Anyone help me please!!

THanks

hondagx35

Hi TheOldMan,

- it works only in IP address, does not work with http://runeaudio.

My question was:
Does a remote browser work?
To get "http://runeaudio" working you have to install Avahi/Bonjour on your PC (see here).

the LCD work, but RuneUI failure, LCD show nginx 404 Not found.

Your browser gets started to early. This shouldn't happen when using the "local browser" option from RuneAudio.

Please post your debug data.

Frank

TheOldMan

Thanks Frank,

My screen have been broken, so I will ask you later when i get the new one.