rlsten I have Rune Audio running on a Raspberry Pi 3 inside an enclosure. I have 2 SD card readers attached via USB to the Pi3. Each SD card reader has 2 SD cards, making a total of 4 SD cards. The 4 SD cards are listed in the library as 4 USB mounts. I was wondering what is the best way for Rune Audio to mount these cards so that it boots as quickly as possible and will maintain the library structure (e.g., I don't want the device names to change or the library to rebuild on each boot). a) Should I basically do nothing and let Rune Audio handle mounting the USB drives or b) Should I edit fstab to identify the SD cards by UUID or Volume Name and mount them in a folder under /mnt/MPD/USB or c) Should I edit fstab to identify the SD cards by UUID or Volume Name and mount them in a folder under /mnt/MPD/LocalStorage or d) Do something else. Thanks, Rod
hondagx35 Hi Rod, if i were you i would disable the "auto mount" option and use option c. I have done this with a sata hdd on my cubietruck, see here. You'll get better control on the mount options (ro or rw). Frank
