Chord Mojo

silvrr

Chord Mojo is working nicely with the Pi 2 and 0.3 beta. 16/44.1, 24/192 and 24/96 all play without issue.

The bit rate indicator is also showing the change in bit rate each time so the Mojo is detecting the bit rate changes as each track starts.

There is a 1 second delay in playback if you change bit rates. I believe this is known issue with the Mojo.

silvrr

....

PeteB

Very nice! (I am starting to have second thoughts about my rats-nest of wires)

silvrr

Yeah, power in and audio out is a pretty simple setup. Much simpler than my normal setup with multiple power cords and interconnects.

dunghnguyen

You just pluged it in the usb port then it was configurated automatically? What is the MPD option you have seen and selected ?

Have you checked playing DSD from Rune?

silvrr

Yes it was plug and play. It played right away and "mojo" showed up in the MPD pull down.

Sorry, didn't try and DSD content.

ttarpd

dunghnguyen wroteYou just pluged it in the usb port then it was configurated automatically? What is the MPD option you have seen and selected ?

Have you checked playing DSD from Rune?

Hi - I can confirm that my RPi3 with the latest v0.3-beta (23/03/2016) build is working perfectly with my Chord Mojo connected via USB.
I just plugged the USB cable in and RuneAudio auto-detected. I did not have to change the MPD settings for Audio output interface.

And I can also confirm that DSD files are playing perfectly too.
I have played DSD 64 / 128 / 256 files all successfully from the network mount I'm using.

dunghnguyen

@[deleted]: I asked you nearly 3 weeks ago that I have not seen the reply. I was shared by others that it played well so I went up with the SMSL M8 here as it played perfectly with Pi 2 #3598

ttarpd

Sorry - I only joined the forum in the last couple of days and saw this unanswered question. Perhaps someone else will benefit from the answer.

Hope you enjoy the SMSL M8!

dunghnguyen

No issue bro ! Hv a nice day

silvrr

ttarpd wrote
dunghnguyen wroteYou just pluged it in the usb port then it was configurated automatically? What is the MPD option you have seen and selected ?

Have you checked playing DSD from Rune?
Hi - I can confirm that my RPi3 with the latest v0.3-beta (23/03/2016) build is working perfectly with my Chord Mojo connected via USB.
I just plugged the USB cable in and RuneAudio auto-detected. I did not have to change the MPD settings for Audio output interface.

And I can also confirm that DSD files are playing perfectly too.
I have played DSD 64 / 128 / 256 files all successfully from the network mount I'm using.

Do you have any clicks or pops at the beginning of tracks?

I previously had a mojo as part of a review program, decided to pick one up and this one has some clicks/pops at the beginning of songs. Its RFI noise from the Wifi. Not sure if the cable I have is different or if I changed something. Do you get any interference?

dunghnguyen

No I did not have when connecting it with Pi2 but there was click, noise when connecting to C2