I am pasting my debug information playing 24/96 flacs just for the developers to have a look:
Array
(
[conf] => Array
(
[audio_output_interface] => 0
[mixer_type] => disabled
[log_level] => default
[gapless_mp3_playback] => yes
[dsd_usb] => yes
[volume_normalization] => no
[audio_buffer_size] => 2048
[buffer_before_play] => 20%
[auto_update] => no
)
[save] => save
)
1
###### System info ######
Linux version 3.10.30+ (dc4@dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #644 PREEMPT Fri Feb 21 18:44:33 GMT 2014
system load: 0.69 0.33 0.18 2/76 789
HW platform: RaspberryPi (01)
playerID: 010ffde043544740869e68bb1ee19fb845
###### Audio backend ######
Advanced Linux Sound Architecture Driver Version k3.10.30+.
Card list: (/proc/asound/cards)
--------------------------------------------------
0 [Audio ]: USB-Audio - SA9023 USB Audio
HiFimeDIY Audio SA9023 USB Audio at usb-bcm2708_usb-1.2, full speed
1 [ALSA ]: BRCM bcm2835 ALSbcm2835 ALSA - bcm2835 ALSA
bcm2835 ALSA
ALSA interface #0: (/proc/asound/card0/pcm0p/info)
--------------------------------------------------
card: 0
device: 0
subdevice: 0
stream: PLAYBACK
id: USB Audio
name: USB Audio
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 1
subdevices_avail: 0
ALSA interface #1: (/proc/asound/card1/pcm0p/info)
--------------------------------------------------
card: 1
device: 0
subdevice: 0
stream: PLAYBACK
id: bcm2835 ALSA
name: bcm2835 ALSA
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 8
subdevices_avail: 8
interface #0 stream status: (/proc/asound/card0/stream0)
--------------------------------------------------------
HiFimeDIY Audio SA9023 USB Audio at usb-bcm2708_usb-1.2, full speed : USB Audio
Playback:
Status: Running
Interface = 3
Altset = 2
Packet Size = 582
Momentary freq = 96000 Hz (0x60.0000)
Interface 3
Altset 1
Format: S16_LE
Channels: 2
Endpoint: 3 OUT (ADAPTIVE)
Rates: 96000, 88200, 48000, 44100, 32000
Interface 3
Altset 2
Format: S24_3LE
Channels: 2
Endpoint: 3 OUT (ADAPTIVE)
Rates: 96000, 88200, 48000, 44100, 32000
Capture:
Status: Stop
Interface 2
Altset 1
Format: S16_LE
Channels: 2
Endpoint: 2 IN (ADAPTIVE)
Rates: 96000, 88200, 48000, 44100, 32000
Interface 2
Altset 2
Format: S24_3LE
Channels: 2
Endpoint: 2 IN (ADAPTIVE)
Rates: 96000, 88200, 48000, 44100, 32000
interface #1 stream status: (/proc/asound/card1/stream0)
--------------------------------------------------------
no stream present
###### Kernel module snd_usb_audio settings ######
Module = "snd_usb_audio"
Attributes:
coresize = "116191"
initsize = "0"
initstate = "live"
refcnt = "1"
srcversion = "6E57D0A9137160413C147C6"
taint = ""
uevent =
Parameters:
autoclock = "Y"
device_setup = "0,0,0,0,0,0,0,0"
enable = "Y,Y,Y,Y,Y,Y,Y,Y"
id = "(null),(null),(null),(null),(null),(null),(null),(null)"
ignore_ctl_error = "N"
index = "0,-1,-1,-1,-1,-1,-1,-1"
nrpacks = "3"
pid = "-1,-1,-1,-1,-1,-1,-1,-1"
vid = "-1,-1,-1,-1,-1,-1,-1,-1"
Sections:
.ARM.exidx.exit.text= "0xbf1fb7d4"
.ARM.exidx.init.text= "0xbf1fb7cc"
.ARM.exidx = "0xbf1fdf20"
.ARM.extab = "0xbf1fdea8"
.ARM.extab.init.text= "0xbf1fb7c0"
.bss = "0xbf201f18"
.data = "0xbf1fe424"
.exit.text = "0xbf1f9ac8"
.gnu.linkonce.this_module= "0xbf201dc8"
.init.text = "0xbf20b000"
.note.gnu.build-id = "0xbf1fe400"
.rodata = "0xbf1f9ad8"
.rodata.str1.4 = "0xbf1fb86c"
.strtab = "0xbf210558"
.symtab = "0xbf20b048"
.text = "0xbf1ed000"
__param = "0xbf1fb7dc"
###### Kernel optimization parameters ######
hardware platform: RaspberryPi
current orionprofile: RuneAudio
kernel scheduler for mmcblk0: [noop] deadline cfq
/proc/sys/vm/swappiness: 0
/proc/sys/kernel/sched_latency_ns: 1500000
###### Filesystem mounts ######
rootfs / rootfs rw 0 0
/dev/root / ext4 rw,noatime,nouser_xattr,errors=remount-ro,data=ordered 0 0
devtmpfs /dev devtmpfs rw,relatime,size=86396k,nr_inodes=21599,mode=755 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620 0 0
mqueue /dev/mqueue mqueue rw,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=21,pgrp=1,timeout=300,minproto=5,maxproto=5,direct 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /sys/fs/cgroup tmpfs rw,nosuid,nodev,noexec,mode=755 0 0
cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpuacct,cpu 0 0
cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
configfs /sys/kernel/config configfs rw,relatime 0 0
tmpfs /run tmpfs rw,nosuid,nodev,mode=755 0 0
Ramdisk /run/shm tmpfs rw,nosuid,nodev,noexec,relatime,size=262144k 0 0
tmpfs /tmp tmpfs rw 0 0
rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0
/dev/mmcblk0p1 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /tmp tmpfs rw 0 0
/dev/root /var/tmp ext4 rw,noatime,nouser_xattr,errors=remount-ro,data=ordered 0 0
//192.168.1.150/Music /mnt/MPD/Resilience cifs ro,relatime,vers=1.0,sec=ntlm,cache=strict,uid=45,forceuid,gid=45,forcegid,addr=192.168.1.150,unix,posixpaths,serverino,acl,rsize=8048,wsize=8096,actimeo=1 0 0
###### mpd.conf ######
###################################
# Auto generated mpd.conf file
# please DO NOT edit it manually!
# Use RuneUI MPD config section
###################################
follow_outside_symlinks "yes"
follow_inside_symlinks "yes"
db_file "/var/lib/mpd/mpd.db"
log_file "/var/log/runeaudio/mpd.log"
pid_file "/var/run/mpd/pid"
music_directory "/mnt/MPD"
playlist_directory "/var/lib/mpd/playlists"
state_file "/var/lib/mpd/mpdstate"
user "mpd"
bind_to_address "any"
port "6600"
log_level "default"
zeroconf_enabled "yes"
zeroconf_name "runeaudio"
volume_normalization "no"
audio_buffer_size "2048"
buffer_before_play "20%"
filesystem_charset "UTF-8"
id3v1_encoding "UTF-8"
gapless_mp3_playback "yes"
auto_update "no"
mixer_type "disabled"
group "audio"
max_connections "20"
decoder {
plugin "ffmpeg"
enabled "no"
}
input {
plugin "curl"
}
audio_output {
enabled "yes"
type "alsa"
name "USB-Audio"
device "hw:0,0"
dsd_usb "yes"
}
audio_output {
enabled "yes"
type "null"
name "Null"
}
audio_output {
enabled "no"
type "alsa"
device "hw:1,0"
name "AnalogJack/HDMI"
}
###### PHP backend ######
php version: 5.5
debug level: 2
###### SESSION ######
STATUS: 1
ID: cl3ria0270fd7274pj2o4dk296
SAVE PATH: /run
###### SESSION DATA ######
Array
(
[orionprofile] => RuneAudio
[cmediafix] => 0
[playmod] => 0
[ramplay] => 0
[sessionid] => cl3ria0270fd7274pj2o4dk296
[mpdconfhash] => e2c77c2bf61e32d460bee95a5bd7a431
[lastfm_apikey] => ba8ad00468a50732a3860832eaed0882
[netconfhash] => 643f8967af551f683b3cfd493950c550
[mpdconf_advanced] => 0
[netconf_advanced] => 0
[dev] =>
[sourceconfhash] => d41d8cd98f00b204e9800998ecf8427e
[sourceconf_advanced] => 1
[debug] => 2
[hiddendebug] => 0
[opcache] => 1
[playerid] => 010ffde043544740869e68bb1ee19fb845
[hwplatform] => RaspberryPi
[hwplatformid] => 01
[airplay] => 0
[scrobbling_lastfm] => 0
[scrobbling_librefm] => 0
[scrobbling_jamendo] => 0
[spotify] => 0
[db_version] => 1.2
[udevil] => 1
[coverart] => 1
[volume] => 0
[ao] => 0
[ntpserver] => ntp.inrim.it
[hostname] => runeaudio
[w_queue] =>
[w_queueargs] =>
[w_lock] => 0
[w_active] => 0
[w_jobID] =>
[debugdata] =>
[netconf] => Array
(
[eth0] => Array
(
[ip] => 192.168.1.106
)
)
[state] => play
[notify] =>
)
Page created in 1.29217 seconds.
My dmesg output is the following:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.30+ (dc4@dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #644 PREEMPT Fri Feb 21 18:44:33 GMT 2014
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] early_vc_cma_mem(0/0x11800000@0xd400000)
[ 0.000000] -> initial 0, size 11800000, base d400000
[ 0.000000] cma: CMA: reserved 280 MiB at 0d400000
[ 0.000000] cma: CMA: reserved 16 MiB at 0b400000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 121856
[ 0.000000] free_area_init_node: node 0, pgdat c05d3e84, node_mem_map c0684000
[ 0.000000] Normal zone: 984 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 121856 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 120872
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xe bcm2708.serial=0x76d9e0ba smsc95xx.macaddr=B8:27:EB:D9:E0:BA sdhci-bcm2708.emmc_clock_freq=250000000 vc-cma-mem=0/0x11800000@0xd400000 mem=0xc400000@0x0 mem=0x11800000@0xd400000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 ipv6.disable=1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p5 rootfstype=ext4 elevator=noop rootwait quiet dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0x3
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 196MB 280MB = 476MB total
[ 0.000000] Memory: 172792k/172792k available, 314632k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xdf000000 - 0xff000000 ( 512 MB)
lowmem : 0xc0000000 - 0xdec00000 ( 492 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0575858 (5559 kB)
.init : 0xc0576000 - 0xc059a344 ( 145 kB)
.data : 0xc059c000 - 0xc05d4990 ( 227 kB)
.bss : 0xc05d4990 - 0xc0683060 ( 698 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.000471] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[ 0.000493] pid_max: default: 32768 minimum: 301
[ 0.000929] Mount-cache hash table entries: 512
[ 0.001687] Initializing cgroup subsys memory
[ 0.001755] Initializing cgroup subsys devices
[ 0.001772] Initializing cgroup subsys freezer
[ 0.001787] Initializing cgroup subsys blkio
[ 0.001920] CPU: Testing write buffer coherency: ok
[ 0.002367] Setting up static identity map for 0xc0408ee8 - 0xc0408f44
[ 0.004112] devtmpfs: initialized
[ 0.051489] NET: Registered protocol family 16
[ 0.057604] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.059041] bcm2708.uart_clock = 0
[ 0.060823] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.060844] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.060859] mailbox: Broadcom VideoCore Mailbox driver
[ 0.060935] bcm2708_vcio: mailbox at f200b880
[ 0.061017] bcm_power: Broadcom power driver
[ 0.061035] bcm_power_open() -> 0
[ 0.061047] bcm_power_request(0, 8)
[ 0.561754] bcm_mailbox_read -> 00000080, 0
[ 0.561771] bcm_power_request -> 0
[ 0.561974] Serial: AMBA PL011 UART driver
[ 0.562116] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.562462] console [ttyAMA0] enabled
[ 0.585122] bio: create slab <bio-0> at 0
[ 0.586279] SCSI subsystem initialized
[ 0.586485] usbcore: registered new interface driver usbfs
[ 0.586581] usbcore: registered new interface driver hub
[ 0.586834] usbcore: registered new device driver usb
[ 0.588574] Switching to clocksource stc
[ 0.588876] FS-Cache: Loaded
[ 0.589162] CacheFiles: Loaded
[ 0.601465] NET: Registered protocol family 2
[ 0.602392] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.602523] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.602599] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.602682] TCP: reno registered
[ 0.602706] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.602739] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.603139] NET: Registered protocol family 1
[ 0.603672] RPC: Registered named UNIX socket transport module.
[ 0.603697] RPC: Registered udp transport module.
[ 0.603708] RPC: Registered tcp transport module.
[ 0.603719] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.604976] bcm2708_dma: DMA manager at f2007000
[ 0.605080] bcm2708_gpio: bcm2708_gpio_probe c05a9e50
[ 0.605493] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.606555] audit: initializing netlink socket (disabled)
[ 0.606647] type=2000 audit(0.580:1): initialized
[ 0.763974] VFS: Disk quotas dquot_6.5.2
[ 0.764266] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.766481] FS-Cache: Netfs 'nfs' registered for caching
[ 0.767782] NFS: Registering the id_resolver key type
[ 0.767892] Key type id_resolver registered
[ 0.767910] Key type id_legacy registered
[ 0.768696] msgmni has been set to 929
[ 0.770788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.771094] io scheduler noop registered (default)
[ 0.771117] io scheduler deadline registered
[ 0.771408] io scheduler cfq registered
[ 0.772831] BCM2708FB: allocated DMA memory 4d800000
[ 0.772899] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 0.778189] Console: switching to colour frame buffer device 82x26
[ 0.780774] uart-pl011 dev:f1: no DMA platform data
[ 0.780831] kgdb: Registered I/O driver kgdboc.
[ 0.781435] vc-cma: Videocore CMA driver
[ 0.781457] vc-cma: vc_cma_base = 0x0d400000
[ 0.781470] vc-cma: vc_cma_size = 0x11800000 (280 MiB)
[ 0.781480] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.790500] brd: module loaded
[ 0.795532] loop: module loaded
[ 0.795807] vchiq: vchiq_init_state: slot_zero = 0xcd400000, is_master = 0
[ 0.796777] vchiq_get_state: g_state.remote->initialised != 1 (0)
[ 0.797301] vchiq_get_state: g_state.remote->initialised != 1 (0)
[ 0.797817] vchiq: vchiq_initialise: videocore initialized after 2 retries
[ 0.805866] Loading iSCSI transport class v2.0-870.
[ 0.806688] usbcore: registered new interface driver smsc95xx
[ 0.806765] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.006887] Core Release: 2.80a
[ 1.006915] Setting default values for core params
[ 1.006957] Finished setting default values for core params
[ 1.207021] Using Buffer DMA mode
[ 1.207044] Periodic Transfer Interrupt Enhancement - disabled
[ 1.207056] Multiprocessor Interrupt Enhancement - disabled
[ 1.207068] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.207085] Dedicated Tx FIFOs mode
[ 1.207817] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xcd814000 dma = 0x4d814000 len=9024
[ 1.207853] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
[ 1.207878] dwc_otg: Microframe scheduler enabled
[ 1.208061] WARN::hcd_init:474: FIQ at 0xc02f1d10
[ 1.208082] WARN::hcd_init:475: FIQ ASM at 0xc02f1f8c length 36
[ 1.208112] WARN::hcd_init:501: MPHI regs_base at 0xdf006000
[ 1.208144] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.208196] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.208255] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.208293] Init: Port Power? op_state=1
[ 1.208304] Init: Power Port (0)
[ 1.208408] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.208430] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.208447] usb usb1: Product: DWC OTG Controller
[ 1.208463] usb usb1: Manufacturer: Linux 3.10.30+ dwc_otg_hcd
[ 1.208477] usb usb1: SerialNumber: bcm2708_usb
[ 1.209322] hub 1-0:1.0: USB hub found
[ 1.209368] hub 1-0:1.0: 1 port detected
[ 1.209727] dwc_otg: FIQ enabled
[ 1.209744] dwc_otg: NAK holdoff enabled
[ 1.209755] dwc_otg: FIQ split-transaction FSM enabled
[ 1.209775] Module dwc_common_port init
[ 1.210197] usbcore: registered new interface driver usb-storage
[ 1.210501] mousedev: PS/2 mouse device common for all mice
[ 1.211114] bcm2835-cpufreq: min=700000 max=700000 cur=700000
[ 1.211212] bcm2835-cpufreq: switching to governor powersave
[ 1.211228] bcm2835-cpufreq: switching to governor powersave
[ 1.211252] cpuidle: using governor ladder
[ 1.211267] cpuidle: using governor menu
[ 1.211332] sdhci: Secure Digital Host Controller Interface driver
[ 1.211345] sdhci: Copyright(c) Pierre Ossman
[ 1.211434] sdhci: Enable low-latency mode
[ 1.248671] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 1.248911] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 1.248997] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.249029] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.249146] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.249355] usbcore: registered new interface driver usbhid
[ 1.249370] usbhid: USB HID core driver
[ 1.249885] TCP: cubic registered
[ 1.249903] Initializing XFRM netlink socket
[ 1.249961] NET: Registered protocol family 17
[ 1.250140] Key type dns_resolver registered
[ 1.250961] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 1.253937] registered taskstats version 1
[ 1.262377] Waiting for root device /dev/mmcblk0p5...
[ 1.309287] mmc0: new high speed SDHC card at address b368
[ 1.309916] mmcblk0: mmc0:b368 SDU1 7.51 GiB
[ 1.312064] mmcblk0: p1 p2 < p5 >
[ 1.406883] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[ 1.406973] VFS: Mounted root (ext4 filesystem) on device 179:5.
[ 1.408832] Indeed it is in host mode hprt0 = 00021501
[ 1.415923] devtmpfs: mounted
[ 1.416425] Freeing unused kernel memory: 144K (c0576000 - c059a000)
[ 1.588736] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.588908] Indeed it is in host mode hprt0 = 00001101
[ 1.789052] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 1.789085] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.789919] hub 1-1:1.0: USB hub found
[ 1.790081] hub 1-1:1.0: 3 ports detected
[ 1.873152] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 2.068876] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.169222] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.169254] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.172226] smsc95xx v1.0.4
[ 2.235178] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d9:e0:ba
[ 2.328880] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ 2.532838] usb 1-1.2: New USB device found, idVendor=267f, idProduct=10e1
[ 2.532873] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.532889] usb 1-1.2: Product: SA9023 USB Audio
[ 2.532903] usb 1-1.2: Manufacturer: HiFimeDIY Audio
[ 2.566236] input: HiFimeDIY Audio SA9023 USB Audio as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
[ 2.566611] hid-generic 0003:267F:10E1.0001: input,hidraw0: USB HID v1.00 Device [HiFimeDIY Audio SA9023 USB Audio] on usb-bcm2708_usb-1.2/input0
[ 2.599356] systemd-modules-load[52]: Module 'nfs' is builtin
[ 2.624318] bcm2708_rng_init=df08e000
[ 2.624897] systemd-modules-load[52]: Inserted module 'bcm2708_rng'
[ 2.707293] systemd-modules-load[52]: Inserted module 'snd_bcm2835'
[ 3.660709] EXT4-fs (mmcblk0p5): Mount option "nouser_xattr" will be removed by 3.5
Contact linux-ext4@vger.kernel.org if you think we should keep it.
[ 3.660776] EXT4-fs (mmcblk0p5): re-mounted. Opts: nouser_xattr,errors=remount-ro
[ 3.824577] systemd-udevd[78]: starting version 210
[ 4.345665] usbcore: registered new interface driver snd-usb-audio
[ 4.474073] bcm2708_i2c_init_pinmode(0,0)
[ 4.474101] bcm2708_i2c_init_pinmode(0,1)
[ 4.474336] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100000)
[ 4.480993] bcm2708_i2c_init_pinmode(1,2)
[ 4.481023] bcm2708_i2c_init_pinmode(1,3)
[ 4.482122] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
[ 4.511725] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[ 4.512835] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
[ 4.605857] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
[ 5.998204] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 7.617662] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 23.909255] CIFS VFS: Error connecting to socket. Aborting operation.
[ 23.909622] CIFS VFS: cifs_mount failed w/return code = -113
[ 33.941991] usbcore: deregistering interface driver snd-usb-audio
[ 34.060023] usbcore: registered new interface driver snd-usb-audio
[ 34.721621] bcm2835-cpufreq: switching to governor performance
[ 34.721657] bcm2835-cpufreq: switching to governor performance
I keep testing my installation with flacs 24/96 and 16/44.1 without any problems. Everything sound as it should. I also applied the fix to other distributions (Volumio and "hand made" archlinux) and i have positive results everywhere.
