Hi janui:
This is the command output plugged in wifi-dog & LAN:
by andre_chang » 06 Feb 2019, 16:24
by janui » 06 Feb 2019, 16:42
systemctl status netctl-auto@wlan1.service
systemctl stop netctl-auto@wlan1.service
systemctl disable netctl-auto@wlan1.service
systemctl status netctl-auto@wlan1.service
rm /etc/systemd/system/multi-user.target.wants/netctl-auto@wlan1.service
by andre_chang » 06 Feb 2019, 17:09
janui wrote:Great andre_chang,
Try:Reboot. Then:
- Code: Select all
systemctl status netctl-auto@wlan1.service
systemctl stop netctl-auto@wlan1.service
systemctl disable netctl-auto@wlan1.service
systemctl status netctl-auto@wlan1.servicejanui
- Code: Select all
rm /etc/systemd/system/multi-user.target.wants/netctl-auto@wlan1.service
by janui » 07 Feb 2019, 15:29
Yes, but only for the startup screen, not the shutting down screen. Use this:andre_chang wrote:...The HDMI screen does not appear RUNE LOGO.. Starting... image after booting. Can it appear?...
systemctl enable bootsplash
by andre_chang » 07 Feb 2019, 16:37
by janui » 08 Feb 2019, 12:07
find / -name *wlan1.service
dir -l /etc/systemd/system/multi-user.target.wants/
by andre_chang » 08 Feb 2019, 12:28
by janui » 08 Feb 2019, 17:38
find / -name *sda1.service
find / -name *sda1.*
by andre_chang » 08 Feb 2019, 17:59
janui wrote:Hi andre_chang,
Neat that it boots from a USB hard disk. You will need to set up the partitions correctly on this to make it useful.
Sorry, I made a mistake in my last post. Could you post the output of this:And this:
- Code: Select all
find / -name *sda1.service
janui
- Code: Select all
find / -name *sda1.*
by janui » 09 Feb 2019, 11:49
root=PARTUUID=<partuuid> rootfstype=ext4
blkid /dev/sda2
You would replace '00005f47-02' with your value.root=PARTUUID=00005f47-02 rootfstype=ext4 rw rootwait console=...
support RuneAudio