Page 4 of 7
Re: Raspberry pie 3B+
Posted:
06 Feb 2019, 16:24by andre_chang
Hi janui:
This is the command output plugged in wifi-dog & LAN:
Re: Raspberry pie 3B+
Posted:
06 Feb 2019, 16:42by janui
Re: Raspberry pie 3B+
Posted:
06 Feb 2019, 17:09by andre_chang
Re: Raspberry pie 3B+
Posted:
07 Feb 2019, 15:29by janui
Re: Raspberry pie 3B+
Posted:
07 Feb 2019, 16:37by andre_chang
Hi janui:
I just tried to install Rune 0.5 on a 2.5 inch hard disk. Let Rune boot from the USB hard disk.
Gitpull finds that you seem to have fixed wlan1's problem. Right?
Install Rune on a 2.5-inch USB hard disk and find that the countdown of 1 minute and 30 seconds will also appear in half of the system: A start job is running for dev-sda1. device (1 minute and 30 seconds)
Can you find the reason?
Tools: PI3B+ & 2.5"-USB-HDD & WIFI-DOG
Andre
Re: Raspberry pie 3B+
Posted:
08 Feb 2019, 12:07by janui
Re: Raspberry pie 3B+
Posted:
08 Feb 2019, 12:28by andre_chang
HI janui:
Rune can be booted from usb-hdd. It can also be browsed and operated through the network.
Yes, the symptoms seem to be the same as WLAN 1...
Andre
Re: Raspberry pie 3B+
Posted:
08 Feb 2019, 17:38by janui
Re: Raspberry pie 3B+
Posted:
08 Feb 2019, 17:59by andre_chang
Re: Raspberry pie 3B+
Posted:
09 Feb 2019, 11:49by janui