In case anyone is watching this thread, I am in need of some help. I read through the thread and still cannot sue the Rune UI to connect to a WiFi. I can from the CLI once I put the information in the /etc/wpa_supplicant/wpa_supplicant.conf
- Code: Select all
root@runeaudio:~ # ip link set dev wlan0 up
root@runeaudio:~ # wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
Successfully initialized wpa_supplicant
root@runeaudio:~ # dhcpcd wlan0
all: IPv6 kernel autoconf disabled
DUID 00:01:00:01:20:23:f2:18:b8:27:eb:e9:62:a0
wlan0: IAID 38:3a:fc:2e
wlan0: adding address fe80::3f81:a780:63ed:4d6e
if_addaddress6: Operation not supported
wlan0: rebinding lease of 10.10.2.179
wlan0: probing address 10.10.2.179/24
wlan0: leased 10.10.2.179 for 7200 seconds
wlan0: adding route to 10.10.2.0/24
wlan0: adding default route via 10.10.2.252
forked to background, child pid 3777
The configuration that was generated by RuneUI when I tried to connect from the UI is a bit odd and does not even show up as a 'saved' profile though it is in /etc/netctl/
This is the profile generated:
- Code: Select all
Description='wlan0 connection'
Interface=wlan0
Connection=wireless
Security=wpa-configsection
IP=dhcp
WPAConfigSection=(
'ssid="xxxxxxx-xxxxxxx"'
'scan_ssid=1'
'psk="passcode"'
'key_mgmt=WPA-PSK'
'proto=WPA'
'group=TKIP'
'pairwise=TKIP'
'priority=3'
)
And this is what I put in wpa supplicant to connect:
- Code: Select all
ap_scan=1
eapol_version=1
network={
ssid="xxxxxxx-xxxxxxx"
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
psk="passcode"
}
So, 2 questions, 1) why does it not show up? and 2) why does it not connect? I do not get it to show up in the UI regardless of clicking through the interface or setting it up manually.
Regards,
Gearhead