RuneAudio Forum

Rather go with a DAC hat I was thinking of using a AMP HAT so i connect speakers directly.

Which AMP HATs does Rune support?

I found an AMP HAT called just boom which looks good. Is that supported/recommended?

Many thanks

I have a Hifiberry Amp2.

https://www.hifiberry.com/blog/introduc ... ffordable/

Currrently on the mantle hidden among the Christmas decorations, it's basically invisible. I use a recyled laptop power supply and only one wire to the nearest wall outlet is detectable. The amp drives 8ohm bookshelf speakears. Volume is quite sufficient for a large family room. Typical listen at 20-30% on the runeaudio app.

I'll take a look at the justboom. Looks like they share the same Texas Instument chip. Eventually I'll have one of these in every room plus the garage.

Thank you. Looks like an option. What size speakers are you powering

These:

Boston Acoustics HD-8
======================
Frequency Response (±3dB): 52Hz – 20kHz
Recommended Power Amplifier Range: 10 - 75 watts
Sensitivity (2.83V @ 1m): 90dB
Nominal Impedance: 8 ohms
Crossover Frequency(ies): 3000 Hz
Low-Frequency Driver: 8" (203mm) Copolymer
High-Frequency Driver: CFT 6 1" (19mm) Dome
Dimensions
(H x W x D): 18-1/4" x 11-1/4" x 7-5/8"
(464mm x 286mm x 194mm)
Weight: 16 lb (7kg)
Finish: Wood-Grain Vinyl Enclosure
Black Grille Cloth

They must sound great. Very nice setup.