RuneAudio Forum

HI, everyone,
first, sorry for my english.

I 've got raspberry 1 b+ with v0.3-beta (29/10/2014).
I bought this digital interface http://www.audiophonics.fr/en/appareils ... 10548.html, but i don't manage to configure this one in audio output.
When i choose xcore it don't start play music.

Please help me, thank you.

Hi,

The answer might be in this thread: alientek-d8-with-xmos-chip-t4366.html

Have a look at http://runeaudio.local:8080/ on your local browser and see if all volumes are at 100%.

Thank you for your answer, stephan.

In fact you think , because it's not in database ?
if i must write code it's going to be hard, i don't how to do in ssh.
hi stephan,

sorry i didn't understand your answer yesterday. It's not a problem of hardware volume, i'm sure, because it don't playback at all, no start.

Hi funhouse61,

In fact you think , because it's not in database ?

Please post your debug data!

Getting access to the console is easy, see below.

@Stephane

Have a look at http://runeaudio.local:8080/ on your local browser and see if all volumes are at 100%.

He uses a RP1, the remote ALSA control only works with the latest test image for the RP2/3.

- Get access to the console:
Use SSH from your PC

If you are not familiar with SSH read this for Windows or this for Linux/MacOS
The default login for RuneAudio is "root" with the password "rune" (without quotes).

- Use sftp to access files on Rune Audio:
Get WinSCP from here and install it.
When it opens setup the following:
- Session
File Protocol: SCP
Host name: The IP address of you Raspberry Pi
User name: root
Password: rune

That's it, connect and you can transfer files just by dragging and dropping.

OSX: Try Cyberduck

Hi, hondagx35

thank you for your informations.

i must wait to post debug because i tried yesterday to update runeaudio, and after it wasn't working. so i have to reinstal runeaudio.
Yesterday i worked ssh for the first time and i understanded how i can i do.

debug info


https://pastebin.com/049uExC0

Is there problem :

card 1:
amixer: Mixer hw:1 load error: Protocol error

Hi funhouse61,

i think with the current used kernel it is not possible to get it running.
You can try to use this image.
Also check this thread for update instructions.

Frank

Hi hongdax35,

thank you i'll try it, but not soon because i go on holiday tomorow.
I will keep you posted.