Page 1 of 1

Flash Rune to BBB eMMC

PostPosted: 06 Feb 2017, 08:32
by Rick101
Is it possible to flash BBB eMMc with Rune or make BBB boot from SD card first?

Hope someone can provide a solution. It is not practical to press user boot button every time.

Many thanks.

Re: Flash Rune to BBB eMMC

PostPosted: 06 Feb 2017, 18:21
by mp29k
I haven't been able to get it to work as you desire (I would prefer it also). I will say though, that it provides AMAZING sound for the little box it is. Stick with the hassle of pressing the boot button at each start-up, and you will be rewarded.

I would also love to be able to load it to the internal memory, if anyone knows how.

Re: Flash Rune to BBB eMMC

PostPosted: 04 May 2017, 04:08
by wilbert-vb
have you tried this command running from microsd?

Code: Select all
dd bs=4M if=RuneAudio_bbb_0.2-beta.img of=/dev/mmcblk1 && sync


Also:

To force a boot from the microSD card, delete the MLO file in the FAT partition of the eMMC.

You can access this when the board is connected over the USB cable and it appears as a thumbdrive.


source: http://elinux.org/Beagleboard:Updating_ ... om_microSD

Re: Flash Rune to BBB eMMC

PostPosted: 22 Jun 2017, 12:05
by graceinc
It is advisable to delete the MLO files of eMMC, this will definitely help you boot the microSD card.

Re: Flash Rune to BBB eMMC

PostPosted: 31 Oct 2019, 14:03
by bolder
mp29k wrote:I haven't been able to get it to work as you desire (I would prefer it also). I will say though, that it provides AMAZING sound for the little box it is. Stick with the hassle of pressing the https://book-of-ra-slot.com/die-besten-tricks-fuer-slot-maschinen/, and you will be rewarded.

I would also love to be able to load it to the internal memory, if anyone knows how.

How did it go?

Re: Flash Rune to BBB eMMC

PostPosted: 07 Nov 2022, 10:42
by Jumblewete
boot button at each start-up, and you will be rewarded.