Beagle Bone Black .img File Size
Posted: 25 Feb 2014, 20:22
I have successfully flashed the .img file to a uSD and booted without much difficulty. However, I'd like to install the .img file to the onboard eMMC flash, but it seems the image file is just slightly too large. I performed the flash using the following command:
The correct image size should be 1,923,088,384 bytes or less, but instead I find it is 2,041,577,472 bytes. Anything I can do to squeeze a square into a round hole?
- Code: Select all
dd if=RuneAudio_bbb_0.2-beta.img of=/dev/mmcblk1 bs=1M
The correct image size should be 1,923,088,384 bytes or less, but instead I find it is 2,041,577,472 bytes. Anything I can do to squeeze a square into a round hole?