help RuneA+R e6 Oled winstar problems
![Post Post](https://www.runeaudio.com/forum/styles/runeaudio/imageset/icon_post_target.png)
Hi Guys
i need some help RuneAudio+R e6
display and powerbutton
i cannot make it work with the oled winstar WEH001602BLPP5N00001 and AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO.
i manage to get all working in moodeaudio but i like to run runeaudio
Please step by step
Regards Jelle
i have this info but no luck, i did the setting in de lcd config
---OLED Display---| |---Raspberry Pi---|
| Pin Description | | Pin Description |
1 Vss (GND) <----> 6 GND
2 VDD (+5.0V) <----> 2 +5.0V
3 nc
4 RS <------------> 26 GPIO 7
5 R/W <------------> 20 GND
6 E <------------> 24 GPIO8
7 DB0
8 DB1
9 DB2
10 DB3
11 DB4 <------------> 22 GPIO25
12 DB5 <------------> 18 GPIO24
13 DB6 <------------> 16 GPIO23
14 DB7 <------------> 10 GPIO15
i need some help RuneAudio+R e6
display and powerbutton
i cannot make it work with the oled winstar WEH001602BLPP5N00001 and AUDIOPHONICS I-Sabre V3 DAC ES9023 TCXO.
i manage to get all working in moodeaudio but i like to run runeaudio
Please step by step
Regards Jelle
i have this info but no luck, i did the setting in de lcd config
---OLED Display---| |---Raspberry Pi---|
| Pin Description | | Pin Description |
1 Vss (GND) <----> 6 GND
2 VDD (+5.0V) <----> 2 +5.0V
3 nc
4 RS <------------> 26 GPIO 7
5 R/W <------------> 20 GND
6 E <------------> 24 GPIO8
7 DB0
8 DB1
9 DB2
10 DB3
11 DB4 <------------> 22 GPIO25
12 DB5 <------------> 18 GPIO24
13 DB6 <------------> 16 GPIO23
14 DB7 <------------> 10 GPIO15