RuneAudio Forum

Caleb wrote:I look forward to continuing.

My display.

https://aliexpress.ru/item/33041327727. ... 7335077076

okay you have the same touchscreen as mine and use the same drivers.

I'll try runeaudio tomorrow to see if I get the same problem as yours.

I also use two raspberry pi (version 2b and 4b) one with the touchscreen connected and the other (at the back, pi 2b) with an allo isolator v1 and an allo boss 2.1.
as power supply for the isolator I use the studer900 powerboard with a 10 volt ac block transformer.
for the raspberry 2b and allo boss 2.1 a Power Module A-19 2x3-20V LT1083 bought at audiophonics this gets ac power from a toroidal transformer of 2x 12 volt.

the raspberry pi 4b for the screen I use the 5 volt power supply and transformer of the linn kudos, I also use the usb output from the rasp 4 that goes to a musical fidelity m1 dac A.
I also have the option to switch the allo isolator to an external 12 volt battery or to switch to the studer900, just because I could and there is a little difference in audio sound.

allo boss v2.1
https://allo.com/sparky/boss-dac.html

allo isolator v1
https://allo.com/sparky/isolator.html

3,5 inch touchsreen
https://www.waveshare.com/wiki/3.5inch_RPi_LCD_(A)

audiophonics powerboard
https://www.audiophonics.fr/en/linear-r ... -4381.html

must mention that I sawed studer900 in half, one side broke and so I could still use it for the allo isolator
studer900
https://nl.aliexpress.com/item/32877699126.html

12 volt battery
https://www.nkon.nl/vmf-12v-7ah-loodacc ... zwQAvD_BwE

Greetings.
I used this screen in conjunction with version 3b.
I used the firmware laid out at the beginning of the topic, without changes, only updated. Tomorrow I'll try to take a photo of his behavior.

I have only assembled raspberry + display, the display is connected directly to the raspberry.

I will use the player with Amanero+ galvanic isolation + AH-D6

http://audiohobby.ru/articles/vysokokac ... a-2-h.html

Caleb wrote:Greetings.
I used this screen in conjunction with version 3b.
I used the firmware laid out at the beginning of the topic, without changes, only updated. Tomorrow I'll try to take a photo of his behavior.

will try it tomorrow and maybe I will get the same problem as you have now.

What version of firmware did you use?

can you upload the firmware image of your player to the cloud storage?

this morning flashed the last img of runeaudio and activated the 3.5 inch plugin, but unfortunately I also get a gray screen.
so what worked before about 2 months ago unfortunately no longer works.

Caleb wrote:What version of firmware did you use?

can you upload the firmware image of your player to the cloud storage?

i am now using volumio for the screen and adapted according to a topic there.

if you want to continue with runeaudio, you will have to seek help from someone else here, I will not go into it further to get it working for me because I now use volumio and that still works fine for me.

As of 20201224, this has been upgraded to a New Version.

Hello.
It was this image that I used for Raspberry 3B, I just did not create an empty file lcd
maybe this is the problem

Caleb wrote:Hello.
It was this image that I used for Raspberry 3B, I just did not create an empty file lcd
maybe this is the problem

I also tried this latest version and put an empty file called lcd in boot and this didn't work for me ....... maybe it works for you.