RuneAudio Forum

Dror,

Code: Select all

/srv/http/bash/cmd.sh power$'\n'off


rern

RPI 3B+ Re6
I can't update the NAS library. I have about 30,000 mp3 files. Finds only about half of them.The update indicator continues to blink, but nothing happens.
Increased the output buffer MPD by 5 times to 40960, did not help.
I find it difficult to find an answer to my question on the forum (I tried, but my English is very bad).
If it is not difficult, help with advice or give a link to the solution of the issue.

@INRI,

rern wrote:RuneAudio+R e6

For all Raspberry Pi: Zero, 1, 2, 3 and 4

As of 20201224, this has been upgraded to a New Version.
...

rern wrote:@INRI,

rern wrote:RuneAudio+R e6

For all Raspberry Pi: Zero, 1, 2, 3 and 4

As of 20201224, this has been upgraded to a New Version.
...

Thank you, I updated RPI, and I coped with the library. Sometimes, when RPI is enabled, the connection to the NAS disappears.
I have to re-type the address.
And another question: the library has NAS, USB, and SD sources. How do I upload music to SD and to which folder?

after 29.1 update, browsing to "settings" loads a message:

Code: Select all

Errors: Unexpected string in JSON at position 904
{ "cpuload" : "1.40 0.70 0.27" , "cputemp" : 35.8 , "startup" : "8s (kernel) + 32s (userspace) " , "throttled" : "0x50005" , "time" : "00:02:23 2021-01-31" , "timezone" : "Asia/Jerusalem" , "uptime" : "1m" , "uptimesince" : "2021-01-31 00:00" , "audioaplayname" : "hifiberry-dacplus" , "audiooutput" : "HiFiBerry DAC+" , "bluetooth" : true , "btdiscoverable" : true , "btformat" : false , "hostapd" : false , "hostname" : "rAudio" , "kernel" : "5.4.83-1-ARCH armv7l" , "lcd" : false , "lcdchar" : false , "lcdcharaddr" : "" , "lcdcharconf" : "" , "ntp" : "pool.ntp.org" , "reboot" : "" , "regdom" : "00" , "relays" : false , "rpi01" : false , "rpimodel" : "Raspberry Pi 2 Model B Rev 1.1" , "soc" : "BCM2836" , "soccpu" : "Cortex-A7" , "socram" : "964MiB" , "socspeed" : "900" , "soundprofile" : true , "version" : "1" , "versionui" : 20210129 , "wlan" : false , "soundprofileval" : "145655 60 1000 4000"▮"}

Reboot hasn't change anything
Dror

dror wrote:after 29.1 update, browsing to "settings" loads a message:

Code: Select all

Errors: Unexpected string in JSON at position 904
{ "cpuload" : "1.40 0.70 0.27" , "cputemp" : 35.8 , "startup" : "8s (kernel) + 32s (userspace) " , "throttled" : "0x50005" , "time" : "00:02:23 2021-01-31" , "timezone" : "Asia/Jerusalem" , "uptime" : "1m" , "uptimesince" : "2021-01-31 00:00" , "audioaplayname" : "hifiberry-dacplus" , "audiooutput" : "HiFiBerry DAC+" , "bluetooth" : true , "btdiscoverable" : true , "btformat" : false , "hostapd" : false , "hostname" : "rAudio" , "kernel" : "5.4.83-1-ARCH armv7l" , "lcd" : false , "lcdchar" : false , "lcdcharaddr" : "" , "lcdcharconf" : "" , "ntp" : "pool.ntp.org" , "reboot" : "" , "regdom" : "00" , "relays" : false , "rpi01" : false , "rpimodel" : "Raspberry Pi 2 Model B Rev 1.1" , "soc" : "BCM2836" , "soccpu" : "Cortex-A7" , "socram" : "964MiB" , "socspeed" : "900" , "soundprofile" : true , "version" : "1" , "versionui" : 20210129 , "wlan" : false , "soundprofileval" : "145655 60 1000 4000"▮"}

Reboot hasn't change anything
Dror

Reboot...it did work for me.....however, I also ran pacman update.....

cmh714 wrote:

dror wrote:after 29.1 update, browsing to "settings" loads a message:

Code: Select all

Errors: Unexpected string in JSON at position 904
{ "cpuload" : "1.40 0.70 0.27" , "cputemp" : 35.8 , "startup" : "8s (kernel) + 32s (userspace) " , "throttled" : "0x50005" , "time" : "00:02:23 2021-01-31" , "timezone" : "Asia/Jerusalem" , "uptime" : "1m" , "uptimesince" : "2021-01-31 00:00" , "audioaplayname" : "hifiberry-dacplus" , "audiooutput" : "HiFiBerry DAC+" , "bluetooth" : true , "btdiscoverable" : true , "btformat" : false , "hostapd" : false , "hostname" : "rAudio" , "kernel" : "5.4.83-1-ARCH armv7l" , "lcd" : false , "lcdchar" : false , "lcdcharaddr" : "" , "lcdcharconf" : "" , "ntp" : "pool.ntp.org" , "reboot" : "" , "regdom" : "00" , "relays" : false , "rpi01" : false , "rpimodel" : "Raspberry Pi 2 Model B Rev 1.1" , "soc" : "BCM2836" , "soccpu" : "Cortex-A7" , "socram" : "964MiB" , "socspeed" : "900" , "soundprofile" : true , "version" : "1" , "versionui" : 20210129 , "wlan" : false , "soundprofileval" : "145655 60 1000 4000"▮"}

Reboot hasn't change anything
Dror

Reboot...it did work for me.....however, I also ran pacman update.....

What command? Pacman - y?

BTW, this is so funny. I really had NO problems with the previous version I used from Jan 5. But that annoying "update" button always makes me feel I'm missing something. So I struggled with myself for some days till I got the balls to break it

INRI wrote:...
And another question: the library has NAS, USB, and SD sources. How do I upload music to SD and to which folder?

/mnt/MPD/SD


@dror,

Fixed.

rern

Edited: Remove "Your error message shows that you're some updates behind. Image files just have been updated. Please try a new one."

Ok working good

Cheers

dror wrote:

cmh714 wrote:

dror wrote:after 29.1 update, browsing to "settings" loads a message:

Reboot hasn't change anything
Dror

Reboot...it did work for me.....however, I also ran pacman update.....

What command? Pacman - y?

BTW, this is so funny. I really had NO problems with the previous version I used from Jan 5. But that annoying "update" button always makes me feel I'm missing something. So I struggled with myself for some days till I got the balls to break it

I did pacman -Syu to fetch all the latest updates especially sudo since there was a big vulnerability....