Page 22 of 35

Re: RuneAudio+R e2 - An improved version of RuneAudio

PostPosted: 11 Nov 2019, 19:56
by AndyF
@rern

What does "URL by name" mean at system-settings? I can´t disable them and I have no idea, what it is for ...

Thanks for your support!

regards, Andy

Re: RuneAudio+R e2 - An improved version of RuneAudio

PostPosted: 11 Nov 2019, 20:41
by s.k.
@ Rern
It is very strange.
In both versions – build from scratch and ready image – the settings are not stored.
After rebooting I have again the default ones.

What am I doing wrong?
Any idea?

Stavros

Re: RuneAudio+R e2 - An improved version of RuneAudio

PostPosted: 12 Nov 2019, 07:43
by s.k.
Hi,
Further info.
I try to change to static IP (192.168.1.101)
It takes some tries but finally:
Image

I reboot the raspberry through the web interface.
Here is the new network info:
Image

The curious thing is that although the eth0 files have the correct info, it doesn’t apply it:
Image

Any thoughts ?

Stavros

Re: RuneAudio+R e2 - An improved version of RuneAudio

PostPosted: 12 Nov 2019, 09:47
by klassikmann
FWIW: Re2 signalled an update today:
https://www.magentacloud.de/lnk/2vBJKfKr
2nd try succeeded.

klassikmann

Re: RuneAudio+R e2 - An improved version of RuneAudio

PostPosted: 12 Nov 2019, 10:45
by vennesch
Thank you so much for this version rern! Best one so far!


Few small bugs though:
In add ons menu
Expand partition fails to download the install file
Update for RU E2.0 succeeds but stays available in the add ons menu

Keep up the good work!

Re: RuneAudio+R e2 - An improved version of RuneAudio

PostPosted: 12 Nov 2019, 12:39
by rern
AndyF wrote:What does "URL by name" mean at system-settings? I can´t disable them and I have no idea, what it is for ...

URL as runeaudio.local instead of IP address for browser connection. And disable script is missing.
s.k. wrote:It is very strange.
In both versions – build from scratch and ready image – the settings are not stored.
After rebooting I have again the default ones.
...

Try set ownership and permissions again:
Code: Select all
chown -R http:http /srv/http/data
chown -R mpd:audio /srv/http/data/mpd

For the static IP address, I have no idea.
For me, I always set static IP address via the router. It's reserved IP or something like that. So I don't have to set the IP every times my RPi get reflashed.

rern

Re: RuneAudio+R e2 - An improved version of RuneAudio

PostPosted: 12 Nov 2019, 13:14
by PierreG64
Thank you very much Rern for this release: RuneAudio+R_e2-RPi2-3
It is functional and all my hardware (Nas NFS, Dac USB Teac) has been recognized unlike the previous version.
I installed it yesterday.
I had only one problem, extend the partition with the addons. So I went through the command line method and "putty" explained on the site.
From there, everything worked.
I do not know anything about programming to help, I enjoy the work of people like you who share what they do.
Thanks again.
Pierre

Re: RuneAudio+R e2 - An improved version of RuneAudio

PostPosted: 14 Nov 2019, 23:45
by PierreG64
Hello Rern,

I can not read the files in ape format. should I add something for that?
if someone has the solution ...

Thanks!

Pierre

Re: RuneAudio+R e2 - An improved version of RuneAudio

PostPosted: 15 Nov 2019, 03:24
by rern
PierreG64 wrote:I can not read the files in ape format. should I add something for that?
if someone has the solution ...

Settings > MPD > Options > FFmpeg - Enable

rern

Re: RuneAudio+R e2 - An improved version of RuneAudio

PostPosted: 16 Nov 2019, 18:39
by s.k.
Hi rern,
- Is it possible to mass import webradios ?
- Is it possible to modify / delete a NAS share ?

Stavros