How to collect DEBUG informations [RuneAudio rel. 0.2]
Posted: 12 Dec 2013, 22:45Here is a little guide on how to collect some debug informations of your configuration.
This report is very important to allow us to support you.
1) With your web browser, go to http://runeaudio/dev.php or http://<your-device-IP>/dev.php
From Debug level menu, select defcon [2] (sys+MPD+PHP) debug level.
Set Hide debug informations to OFF .
2) Scroll down page, you will see some debug informations.
Select them as shown in the screenshot, copy them and paste on your forum post, between "Code" tags. Result should be like this:
It will help us to understand where problems come from and give better support.
This report is very important to allow us to support you.
1) With your web browser, go to http://runeaudio/dev.php or http://<your-device-IP>/dev.php
From Debug level menu, select defcon [2] (sys+MPD+PHP) debug level.
Set Hide debug informations to OFF .
- dev_php.png (55.36 KiB) Viewed 5727 times
2) Scroll down page, you will see some debug informations.
- debug_info.png (50.97 KiB) Viewed 5727 times
Select them as shown in the screenshot, copy them and paste on your forum post, between "Code" tags. Result should be like this:
- Code: Select all
Array
(
[orionprofile] => OrionV2
[save] => save
)
1
###### System info ######
Linux version 3.6.11-18-ARCH+ (nobody@) (gcc version 4.7.2 (GCC) ) #1 PREEMPT Mon Oct 21 01:15:42 CDT 2013
system load: 0.49 0.23 0.20 1/90 1727
HW platform: RaspberryPi (01)
...
It will help us to understand where problems come from and give better support.