Page 1 of 1

How to collect DEBUG informations [RuneAudio rel. 0.2]

PostPosted: 12 Dec 2013, 22:45
by Orion
Here is a little guide on how to collect some debug informations of your configuration.
This report is very important to allow us to support you.

1) With your web browser, go to http://runeaudio/dev.php or http://<your-device-IP>/dev.php

From Debug level menu, select defcon [2] (sys+MPD+PHP) debug level.
Set Hide debug informations to OFF .

dev_php.png
dev_php.png (55.36 KiB) Viewed 3650 times


2) Scroll down page, you will see some debug informations.

debug_info.png
debug_info.png (50.97 KiB) Viewed 3650 times


Select them as shown in the screenshot, copy them and paste on your forum post, between "Code" tags. Result should be like this:

Code: Select all
      Array
(
    [orionprofile] => OrionV2
    [save] => save
)
1
###### System info ######
Linux version 3.6.11-18-ARCH+ (nobody@) (gcc version 4.7.2 (GCC) ) #1 PREEMPT Mon Oct 21 01:15:42 CDT 2013

system load:   0.49 0.23 0.20 1/90 1727

HW platform:   RaspberryPi (01)

...


It will help us to understand where problems come from and give better support.