RuneAudio Forum

I couldn't resize the partition. After

Code: Select all

resize2fs /dev/mmcblk0p1

got the following error message:

Code: Select all

Filesystem at /dev/mmcblk0p1 is mounted on /; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 1
resize2fs:The device out of space while checking for on-line resizing support

I also tried to resize it on the PC by the partition manager, but it also could not.

Hi alex,

some sd cards report an incorrect size to the systems.
I had this once with an older card.

You can try not to use the whole card (fdisk).

Frank

I have found experimentally, that my 16 GB UHS card allowed only 14 GB partition. Any way, it is more than enough.
Thanks a lot for your advise!

Great job!
I'm really interested in the description, just wonder if this would fit into the HK Cloud Shell somehow.

gkkpch wrote:Great job!
I'm really interested in the description, just wonder if this would fit into the HK Cloud Shell somehow.

Oh! sorry. I've just moved my post here.
runeaudio-as-a-standalone-system-server-and-client-on-c1-t1371.html

Aaah, that's what happened, thought I was going nuts

If you have a problem with booting from UHC-I SDCARD, this is a solution:
Edit /boot/boot.ini using a card reader in PC with Linux , comment last line from section below:

Code: Select all

# UHS Card Configuration
# Uncomment the line below to __DISABLE__ UHS-1 MicroSD support
# This might break boot for some brand models of
# setenv disableuhs "disableuhs"

Tomek

Hi

I installed Rune for my Odroid C1+ yesterday and I see the first partition starts at sector 2048. But hardkernel advice that the first partition should start at sector 3072. Is there a reason why Rune deviates from the standard? I assume it can be corrected by moving the partition? Thanks!

Hi Pepsican,

the size doesn't matter as far as there is enough room.

With the next image this will be corrected.

Frank

Does this image can use WiFi module 4?
There is no issue for Ethernet port but there is no connect by WiFi module 4.
Or this image just can pass thought Ethernet port

Thanks your help
Leslie Yu