Page 4 of 4

Re: Audiophonics DAC Sabre ES9023 i2s 24bit/192 - Raspberry

PostPosted: 21 Dec 2016, 14:04
by Yatsushiro
This may help:

http://www.dimdim.gr/2014/12/the-rasber ... rough-i2s/

Is this is your DAC (your link doesn't work):

http://www.ebay.co.uk/itm/Audiophonics- ... SwEzxYPonx

I believe these are the connections you need to make:

from DAC to Pi GPIO;
5V to pin2
PWR GND to pin6 (gnd)
BCK to pin12
MCLK unconnected, as your DAC should have it's own clock
LRCK to pin35
GND dac to pin39
DATA to pin40

Then enable hifiberry DAC in your config.txt file.

Re: Audiophonics DAC Sabre ES9023 i2s 24bit/192 - Raspberry

PostPosted: 21 Dec 2016, 15:10
by cesarus
Yes that is my dac but have diferent TCXO Clock. They sent me older version. Can you tell me vere is config.txt or some link to dummy manual. I am complete noby on this subject.
Thanks for your effort.

Re: Audiophonics DAC Sabre ES9023 i2s 24bit/192 - Raspberry

PostPosted: 21 Dec 2016, 15:26
by Yatsushiro
Assuming you have made the physical connections listed above, you will then need to edit your config.txt file to enable Rune to recognise the presence of your DAC and load the correct driver. See the instructions here:

http://www.runeaudio.com/documentation/ ... eshooting/

Re: Audiophonics DAC Sabre ES9023 i2s 24bit/192 - Raspberry

PostPosted: 21 Dec 2016, 15:35
by cesarus
I will try that. No metter of success you are the best. Many thanks I will inform you when I done.

Re: Audiophonics DAC Sabre ES9023 i2s 24bit/192 - Raspberry

PostPosted: 21 Dec 2016, 16:52
by cesarus
" It's alive " thanks again. Sound is good no jitter .Thanks one more time.

Re: Audiophonics DAC Sabre ES9023 i2s 24bit/192 - Raspberry

PostPosted: 21 Dec 2016, 17:29
by Yatsushiro
Great stuff, glad to have helped.