yok3 wrote:Txn Ahtunowhiho
pff...don't know if I'm abile to do that...
I'm just a plain user, don't know how to go inside code...
maybe if there is somewhare guide for ''idiots''
will try ;
'' Menu-Mpd-Audio_output_interface there is
'snd_rpi_rpi_dac ''
maybe that will do the trick...
At first you have to open a terminal (in Windows use
http://www.putty.org/ or
http://www.bitvise.com/download-area) and start a secure shell (ssh), you need the ip-adress of raspberry, then type: ssh root@'ip-adress' (so you have superuser already, password is 'rune').
You also can do it directly connected to raspberry (with keyboard and monitor, then you need no secure shell and no ip-adress of course). You have to be superuser (type su, pw 'rune').
Then you type: nano /etc/modules-load.d/raspberrypi.conf.
Nano is a simple editor (
http://www.howtogeek.com/howto/42980/th ... xt-editor/).
There you copy-paste:
bcm2708-rng
snd-bcm2835
snd_soc_bcm2708
snd_soc_bcm2708_i2s
bcm2708_dmaengine
snd-soc-pcm1794a
snd_soc_rpi_dac
Now you press Ctrl+O, then hit Return (→ save), Ctrl+X for exiting.
Afterwards type 'reboot' and you are done, hopefully. If someone has a better 'instruction' please let us know.