RuneAudio+R e6

Raspberry Pi related support

Re: RuneAudio+R e6

Postby bink » 20 Feb 2021, 23:15

Caleb wrote:I look forward to continuing.

My display.

https://aliexpress.ru/item/33041327727. ... 7335077076

okay you have the same touchscreen as mine and use the same drivers.

I'll try runeaudio tomorrow to see if I get the same problem as yours.

I also use two raspberry pi (version 2b and 4b) one with the touchscreen connected and the other (at the back, pi 2b) with an allo isolator v1 and an allo boss 2.1.
as power supply for the isolator I use the studer900 powerboard with a 10 volt ac block transformer.
for the raspberry 2b and allo boss 2.1 a Power Module A-19 2x3-20V LT1083 bought at audiophonics this gets ac power from a toroidal transformer of 2x 12 volt.

the raspberry pi 4b for the screen I use the 5 volt power supply and transformer of the linn kudos, I also use the usb output from the rasp 4 that goes to a musical fidelity m1 dac A.
I also have the option to switch the allo isolator to an external 12 volt battery or to switch to the studer900, just because I could and there is a little difference in audio sound.

allo boss v2.1
https://allo.com/sparky/boss-dac.html

allo isolator v1
https://allo.com/sparky/isolator.html

3,5 inch touchsreen
https://www.waveshare.com/wiki/3.5inch_RPi_LCD_(A)

audiophonics powerboard
https://www.audiophonics.fr/en/linear-r ... -4381.html

must mention that I sawed studer900 in half, one side broke and so I could still use it for the allo isolator :)
studer900
https://nl.aliexpress.com/item/32877699126.html

12 volt battery
https://www.nkon.nl/vmf-12v-7ah-loodacc ... zwQAvD_BwE
Last edited by bink on 20 Feb 2021, 23:36, edited 2 times in total.
bink
 
Posts: 15
Joined: 21 Nov 2020, 14:11

Re: RuneAudio+R e6

Postby Caleb » 20 Feb 2021, 23:25

Greetings.
I used this screen in conjunction with version 3b.
I used the firmware laid out at the beginning of the topic, without changes, only updated. Tomorrow I'll try to take a photo of his behavior.
Caleb
 
Posts: 15
Joined: 13 Feb 2021, 23:19
Location: Russia

Re: RuneAudio+R e6

Postby Caleb » 20 Feb 2021, 23:28

I have only assembled raspberry + display, the display is connected directly to the raspberry.

I will use the player with Amanero+ galvanic isolation + AH-D6

http://audiohobby.ru/articles/vysokokac ... a-2-h.html
Last edited by Caleb on 20 Feb 2021, 23:43, edited 1 time in total.
Caleb
 
Posts: 15
Joined: 13 Feb 2021, 23:19
Location: Russia

Re: RuneAudio+R e6

Postby bink » 20 Feb 2021, 23:39

Caleb wrote:Greetings.
I used this screen in conjunction with version 3b.
I used the firmware laid out at the beginning of the topic, without changes, only updated. Tomorrow I'll try to take a photo of his behavior.

will try it tomorrow and maybe I will get the same problem as you have now.
bink
 
Posts: 15
Joined: 21 Nov 2020, 14:11

Re: RuneAudio+R e6

Postby Caleb » 20 Feb 2021, 23:46

What version of firmware did you use?

can you upload the firmware image of your player to the cloud storage?
Caleb
 
Posts: 15
Joined: 13 Feb 2021, 23:19
Location: Russia

Re: RuneAudio+R e6

Postby bink » 21 Feb 2021, 09:42

this morning flashed the last img of runeaudio and activated the 3.5 inch plugin, but unfortunately I also get a gray screen.
so what worked before about 2 months ago unfortunately no longer works.
bink
 
Posts: 15
Joined: 21 Nov 2020, 14:11

Re: RuneAudio+R e6

Postby bink » 21 Feb 2021, 09:45

Caleb wrote:What version of firmware did you use?

can you upload the firmware image of your player to the cloud storage?

i am now using volumio for the screen and adapted according to a topic there.

if you want to continue with runeaudio, you will have to seek help from someone else here, I will not go into it further to get it working for me because I now use volumio and that still works fine for me.
Last edited by bink on 21 Feb 2021, 09:53, edited 1 time in total.
bink
 
Posts: 15
Joined: 21 Nov 2020, 14:11

Re: RuneAudio+R e6

Postby rern » 21 Feb 2021, 09:48

As of 20201224, this has been upgraded to a New Version.
rAudio @ https://github.com/rern/rAudio-1
Raspberry Pi 4B
Raspberry Pi 3B > SMSL M8 DAC
Raspberry Pi Zero W
User avatar
rern
 
Posts: 723
Joined: 14 Jul 2016, 08:15

Re: RuneAudio+R e6

Postby Caleb » 21 Feb 2021, 10:45

Hello.
It was this image that I used for Raspberry 3B, I just did not create an empty file lcd
maybe this is the problem
Caleb
 
Posts: 15
Joined: 13 Feb 2021, 23:19
Location: Russia

Re: RuneAudio+R e6

Postby bink » 21 Feb 2021, 10:54

Caleb wrote:Hello.
It was this image that I used for Raspberry 3B, I just did not create an empty file lcd
maybe this is the problem

I also tried this latest version and put an empty file called lcd in boot and this didn't work for me ....... maybe it works for you.
bink
 
Posts: 15
Joined: 21 Nov 2020, 14:11

support RuneAudio Donate with PayPal

PreviousNext

Return to Raspberry Pi

Who is online

Users browsing this forum: No registered users and 3 guests