RuneAudio+R e2 - An improved version of RuneAudio

Raspberry Pi related support

Re: RuneAudio+R e1 - An improved version of RuneAudio

Postby belgarath0815 » 03 Oct 2019, 18:58

hi,

a small bug i found while trying to figure out i2s

setting i2s module to one of the two generic akm ak4xxx is not working.
its not saved in the i2s files on the usb...
maybe its because of the "( )" in the module name?


regards
belgarath0815
 
Posts: 14
Joined: 22 Jun 2015, 22:31

Re: RuneAudio+R e1 - An improved version of RuneAudio

Postby kirx » 03 Oct 2019, 20:32


@kirx,

Please help me verify the working netctl profile:
- Disconnect and backup-remove the current profile.
- Reconnect with:
Code: Select all
wifi-menu

- Get the content of the new saved profile.

rern


@rern,

Kindly find the requested information below (obtained from a brand new setup, meaning no Wi-Fi profiles were created/saved in advance):
Code: Select all
1 Description='Automatically generated profile by wifi-menu'
2 Interface=wlan0
3 Connection=wireless
4 Security=wpa
5 ESSID=*************
6 IP=dhcp
7 Key=###############


BTW, Wi-Fi network connection has been established succesfully from the first attempt.
There is one interesting point: this newly created profile has a name that is looking like 'wlan0-mySSIDname'. In the past I didn't see such a prefix. ;)
kirx
 
Posts: 5
Joined: 02 Oct 2019, 14:40

Re: RuneAudio+R e1 - An improved version of RuneAudio

Postby rern » 04 Oct 2019, 01:07

belgarath0815 wrote:a small bug i found while trying to figure out i2s

setting i2s module to one of the two generic akm ak4xxx is not working.
its not saved in the i2s files on the usb...
maybe its because of the "( )" in the module name?
...

You're right. It's fixed.

rern
rAudio @ https://github.com/rern/rAudio-1
Raspberry Pi 4B
Raspberry Pi 3B > SMSL M8 DAC
Raspberry Pi Zero W
User avatar
rern
 
Posts: 723
Joined: 14 Jul 2016, 08:15

Re: RuneAudio+R e1 - An improved version of RuneAudio

Postby rern » 04 Oct 2019, 01:08

Update 20191004
- Fix - Library tools show/hide not working.
- Fix - Bookmark thumbnails cannot be created.
- Fix - NAS mounts data in persistent settings
- Fix - GPIO menu listed without installed addon.
- Fix - RPi browser current screenoff duration display in seconds.
- Fix - I2S module "Generic AKM AK4xxx" cannot be set.

rern
rAudio @ https://github.com/rern/rAudio-1
Raspberry Pi 4B
Raspberry Pi 3B > SMSL M8 DAC
Raspberry Pi Zero W
User avatar
rern
 
Posts: 723
Joined: 14 Jul 2016, 08:15

Re: RuneAudio+R e1 - An improved version of RuneAudio

Postby Alien8 » 04 Oct 2019, 05:24

s.k. wrote:Question:
Does anyone use in his setup LIRC for an IR remote, or PydPiper for an OLED display, with the RuneAudio+R e1.2 ?
I would like to know if they work successfully.

Thanks in advance


HI
I Successfully managed to get the pydpiper script up and running...
Short version :
Use docker for install
Switch to mpd as 'source' and mod that file to include the 'stream = webradio or not_webradio' variable (old bug that is still there)
RPi2B Rev 1.2, AUDIOPHONICS I-SABRE AMP DAC ES9023, Audiophonics ATX, hd44780 LCD running R+Re6
Alien8
 
Posts: 31
Joined: 29 Aug 2019, 10:57

Re: RuneAudio+R e1 - An improved version of RuneAudio

Postby Mainstreet » 04 Oct 2019, 07:49

Hi!

Got a clean install on RPi3A+. Some settings can't be saved, i.e. Player name, I2S model. Switched on interface features, such as buttons, displayed until first page refresh.

Is it a bug or I'm doing sonething wrong?

Regards
Mainstreet
 
Posts: 7
Joined: 04 Oct 2019, 07:30

Re: RuneAudio+R e1 - An improved version of RuneAudio

Postby rern » 04 Oct 2019, 10:35

Mainstreet wrote:Got a clean install on RPi3A+. Some settings can't be saved, i.e. Player name, I2S model. Switched on interface features, such as buttons, displayed until first page refresh.
...

Upgrade?

Settings > Addons > RuneAudio+R e1 > Update

rern
rAudio @ https://github.com/rern/rAudio-1
Raspberry Pi 4B
Raspberry Pi 3B > SMSL M8 DAC
Raspberry Pi Zero W
User avatar
rern
 
Posts: 723
Joined: 14 Jul 2016, 08:15

Re: RuneAudio+R e1 - An improved version of RuneAudio

Postby ceejayemm » 04 Oct 2019, 11:15

Rern

I have been using RuneAudio e1.x on a Pi 3B for some while, with few of the problems reported here. Last night I flashed a new SD card to RA+R e1.2 and created a new small USB drive formatted to Ext4. As this was a 'new' installation I was happy to work through the setup of the system once it booted into RA. I applied the 20191001 updates before creating the Source which was an NFS share from my NAS (Open Media Vault v4.1.25) which I have been using for a long while. All went well and after a final reboot I updated the RA Library with both my NAS basis music and the 15 or so web radio stations I general use. This morning I have applied the 20191004 update you have recently released. I seem to have a stable useable system again . I use a wired access to RA so I have disbaled wireless and bluetooth access, with all my music coming from my NAS and none stored locally on USB/SD.

I have however noted a couple of things which might be of use to others.

The setup has been stored to the USB drive, however the folders are now created under '/data' on the USB drive where they used (in e1.0/1.1) to be created in the root folder of the USDB drive.

I created the NAS NFS connection manually via the USB and NAS + button on the Sources page. In e1.0/1.1 the NFS path was /Music/iTunes/Music however in e1.2 this has changed (back) to /export/Music/iTunes/Music. This isn't a problem for me as this is the way it used to be in RA 3/4/5.

Please keep up your excellent work on this version of RA. It would be interesting to know how what you are doing fits in with that of Janui, Hondagx35 and ACX and that you are all working together on future updates to RA rather than fragmenting what is a very good product.

Many thanks

Chris
ceejayemm
 
Posts: 131
Joined: 29 Oct 2016, 18:13

Re: RuneAudio+R e1 - An improved version of RuneAudio

Postby jlynton » 04 Oct 2019, 11:16

rern wrote:Upgrade?

Settings > Addons > RuneAudio+R e1 > Update

rern

Just did the upgrade, after a reboot all I got on the screen was a '+' with a little blue lightning bolt below it. Useless!
jlynton
 
Posts: 49
Joined: 20 May 2016, 12:53

Re: RuneAudio+R e1 - An improved version of RuneAudio

Postby s.k. » 04 Oct 2019, 11:40

Alien8 wrote:I Successfully managed to get the pydpiper script up and running...
Short version :
Use docker for install
Switch to mpd as 'source' and mod that file to include the 'stream = webradio or not_webradio' variable (old bug that is still there)


Hi Alien8,
Thank you very much for your answer.

Is it possible to describe in more detail the steps that you performed ?
My skills are limited and any help it will be appreciated.

Best regards
Stavros
RPi2B Rev 1.1, Allo DigiOne, ATXRaspi, 16x2 OLED display - running rAudio
s.k.
 
Posts: 113
Joined: 04 Jan 2017, 08:38

support RuneAudio Donate with PayPal

PreviousNext

Return to Raspberry Pi

Who is online

Users browsing this forum: No registered users and 2 guests
cron