Removed the digi and HDD, same error...
Just to be sure : I burned the image on a 32g SD card and tried to boot with it, wich gave me the error message. This is the right way to do, yes?
I know jack shit about what these error codes means. HELP!!!
by McFly » 28 Jan 2020, 22:11
by ayase1121 » 04 Feb 2020, 01:24
by CrivenS » 06 Feb 2020, 01:01
by rastus » 06 Feb 2020, 02:42
CrivenS wrote:...and only had the rainbow screen on hdmi.
by CrivenS » 06 Feb 2020, 03:34
rastus wrote: The rainbow screen is the Raspberry Pie's way of saying, "I need more power please."
by EZJstef » 06 Feb 2020, 20:28
by CrivenS » 07 Feb 2020, 12:40
by Cyborg_delta1 » 11 Feb 2020, 21:46
McFly wrote:Removed the digi and HDD, same error...
Just to be sure : I burned the image on a 32g SD card and tried to boot with it, wich gave me the error message. This is the right way to do, yes?
I know jack shit about what these error codes means. HELP!!!
by Cyborg_delta1 » 11 Feb 2020, 22:15
CrivenS wrote:Greetings,
I'm having problems haven't managed to successfully boot yet, and I have tried both available images on two different SD cards (a 64 and a 32) using usb image tool:
RuneAudio_rpi2_rp3_0.4-beta_20160321_2GB
&
RuneAudio_ODROIDC2_0.4-beta_20160518_2GB
I've never yet seen even a flicker of green from the pi to indicate SD reading. and only had the rainbow screen on hdmi.
I have successfully had M2P, Moode and Volumio run from each card as well to test.
Kind of at my wits end. Any suggestions would be appreciated.
by Cyborg_delta1 » 11 Feb 2020, 22:53
EZJstef wrote:hi all,
i am wonder if special script needed on rune 0.5 to use power on button with the audiophonics pcb
https://www.audiophonics.fr/fr/kits-et-modules-diy/audiophonics-pi-spc-v2-module-de-controle-alimentation-type-atx-pre-assemble-p-11125.html
because seems not working in good condition .... without any change on runeaudio image
anyone can help me?
regards Stef
support RuneAudio