Hi,
I can not change any settings. After clicking on save the old values are back.
In sources, MPD configuration, settings. The latest version.
by zomtec » 10 Jan 2018, 21:09
by janui » 11 Jan 2018, 09:48
redis-cli set hwplatformid ""
by zomtec » 13 Jan 2018, 19:34
by janui » 13 Jan 2018, 20:55
fdisk /dev/mmcblk0
Welcome to fdisk (util-linux 2.25.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/mmcblk0: 14.5 GiB, 15523119104 bytes, 30318592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x417ee54b
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 2048 186367 184320 90M c W95 FAT32 (LBA)
/dev/mmcblk0p2 186368 6477823 6291456 3G 5 Extended
/dev/mmcblk0p5 188416 6477823 6289408 3G 83 Linux
Command (m for help): d
Partition number (1,2,5, default 5): 5
Partition 5 has been deleted.
Command (m for help): d
Partition number (1,2, default 2): 2
Partition 2 has been deleted.
Command (m for help): n
Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p): e
Partition number (2-4, default 2): 2
First sector (186368-30318591, default 186368):
Last sector, +sectors or +size{K,M,G,T,P} (186368-30318591, default 30318591):
Created a new partition 2 of type 'Extended' and of size 14.4 GiB.
Command (m for help): n
Partition type
p primary (1 primary, 1 extended, 2 free)
l logical (numbered from 5)
Select (default p): l
Adding logical partition 5
First sector (188416-30318591, default 188416):
Last sector, +sectors or +size{K,M,G,T,P} (188416-30318591, default 30318591):
Created a new partition 5 of type 'Linux' and of size 14.4 GiB.
Command (m for help): t
Partition number (1,2,5, default 5):
Hex code (type L to list all codes): 83
Changed type of partition 'Linux' to 'Linux'.
Command (m for help): p
Disk /dev/mmcblk0: 14.5 GiB, 15523119104 bytes, 30318592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x417ee54b
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 2048 186367 184320 90M c W95 FAT32 (LBA)
/dev/mmcblk0p2 186368 30318591 30132224 14.4G 5 Extended
/dev/mmcblk0p5 188416 30318591 30130176 14.4G 83 Linux
Command (m for help): w
p
d
5
d
2
n
e
2
<cr>
<cr>
n
l
<cr>
<cr>
t
5
83
p
w
partprobe /dev/mmcblk0
resize2fs /dev/mmcblk0p5
parted -ls
df -h
by gearhead » 17 Jan 2018, 20:31
by gearhead » 18 Jan 2018, 19:12
root@runeaudio:~ # ip link set dev wlan0 up
root@runeaudio:~ # wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
Successfully initialized wpa_supplicant
root@runeaudio:~ # dhcpcd wlan0
all: IPv6 kernel autoconf disabled
DUID 00:01:00:01:20:23:f2:18:b8:27:eb:e9:62:a0
wlan0: IAID 38:3a:fc:2e
wlan0: adding address fe80::3f81:a780:63ed:4d6e
if_addaddress6: Operation not supported
wlan0: rebinding lease of 10.10.2.179
wlan0: probing address 10.10.2.179/24
wlan0: leased 10.10.2.179 for 7200 seconds
wlan0: adding route to 10.10.2.0/24
wlan0: adding default route via 10.10.2.252
forked to background, child pid 3777
Description='wlan0 connection'
Interface=wlan0
Connection=wireless
Security=wpa-configsection
IP=dhcp
WPAConfigSection=(
'ssid="xxxxxxx-xxxxxxx"'
'scan_ssid=1'
'psk="passcode"'
'key_mgmt=WPA-PSK'
'proto=WPA'
'group=TKIP'
'pairwise=TKIP'
'priority=3'
)
ap_scan=1
eapol_version=1
network={
ssid="xxxxxxx-xxxxxxx"
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
psk="passcode"
}
by janui » 18 Jan 2018, 20:51
by gearhead » 18 Jan 2018, 23:07
readline-7.0.003-1 is up to date -- reinstalling
by janui » 18 Jan 2018, 23:27
php -f /srv/http/db/redis_datastore_setup check
php -f /var/www/command/refresh_nics
by gearhead » 19 Jan 2018, 00:10
wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255
ether 74:da:38:3a:fc:2e txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
support RuneAudio