Amplifier: Cambridge Audio Topaz AM1 Amplifier
Speakers: Wharfedale Diamond 9.1 Speakers
DAC: IQaudIO Pi-DAC+ (when Release)
Hardware: Raspberry Pi B+
Case: Aluminum chassis case enclosure for F6 circuit preamp amplifier
PSU: Lascar PSU-20105
Other: ATXRaspi, RJ45 Male to Female Screw panel mount, mini heat sinks
The music files are either Flac or MP3 which are hosted on Zyxel NAS325 v2
Case
I modified the case to add Momentary led switch to be wired to an ATXRaspi http://lowpowerlab.com/atxraspi/
3 pairs of RCA holes were removed to allow for cable access
Build
I have mount the PI, ATXRaspi and Power supply on a piece of aluminium sheet with a number of metal stand off secured in place with some JD weld.
PSU
http://www.lascarelectronics.com/temper ... logger=126
To do
- Add LCD display
Mount RJ45 panel in hole
Add RCA connectors to rear panel and have RCA plugs internal for connect to the IQaudIO
Add infra-red remote
Design Issue
MicroSD card removal is only possible by removing the Raspberry Pi B+
USB and HDMI Cables have to be routed under ATXRasPI
USB ports are a little to close to the rear
