my multi-room system

Build/modify/repair equipment and improve systems performance by yourself

my multi-room system

Postby SimonS » 26 Aug 2018, 16:20

After khmm... long time I finally finish my multi-room system.
At first I create own piggy-board with 3x AMP and controlled by RPi. Then this project die, because I have no idea how to program RPi :(
At end I buy AMP board and made switching system 1:3. So I use toggle switch to set room. At first work great. But after day I note, that power supply and AMP board become to hot. This is no good thing. I was thinking, that D-class amp not consumed power when is no signal. I was wrong!
OK what now? If I totally cut off power also PRi will stay without power and need time to restart, and also can lose his IP, .... So I got idea, to leave only power supply for RPi and add new toggle switch to power only amplifier. Also I add LED, to note that AMP is on.
It not look nice from inside, but never mind work fine and this is important for me :D ;)
Attachments
2.jpg
2.jpg (67.86 KiB) Viewed 4150 times
1.jpg
1.jpg (99.58 KiB) Viewed 4150 times
SimonS
 
Posts: 17
Joined: 07 Jun 2016, 17:20
Location: Kobarid, Slovenia

support RuneAudio Donate with PayPal

Return to DIY and tweaks

Who is online

Users browsing this forum: No registered users and 3 guests
cron