I have a problem to install my display driver for my Joy-IT 5 Zoll HDMI LCD.
I'm using the Raspberry PI 3B+ with Rune 0.5 beta.
The local browser on the display works fine. My problem occurs when i try to install the display driver to use the touch functions.
I act according to the manual:
- Code: Select all
root@runeaudio(rw):/display# tar xzvf joy-IT-lcd5-driver.tar.gz
LCD-show/
LCD-show/boot/
LCD-show/boot/config-5.txt-270
LCD-show/boot/mark
LCD-show/boot/config-nomal.txt
LCD-show/boot/config-5.txt-180
LCD-show/boot/config-5.txt
LCD-show/boot/config-5.txt-90
LCD-show/xinput-calibrator_0.7.5-1_armhf.deb
LCD-show/_/
LCD-show/_/99-calibration.conf-101-1024x600
LCD-show/etc/
LCD-show/etc/X11/
LCD-show/etc/X11/xorg.conf.d/
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-5-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-180
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-90
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-270
LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-180
LCD-show/inittab
LCD-show/dtc.sh
LCD-show/LCD5-show
LCD-show/usr/
LCD-show/usr/share/
LCD-show/usr/share/X11/
LCD-show/usr/share/X11/xorg.conf.d/
LCD-show/usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI
LCD-show/usr/share/X11/xorg.conf.d/99-fbturbo.conf
LCD-show/cmdline.txt
root@runeaudio(rw):/display# cd LCD-show/
root@runeaudio(rw):/display/LCD-show# sudo bash ./LCD5-show
mkdir: cannot create directory ‘/etc/X11/xorg.conf.d’: File exists
LCD configrue 0
After this failure the raspberry freeze at the rune audio screen. Boot seems to be correct i can use the system with runeaudio.local as before.
I'm afraid that the display don't work with rune.
Is there anything I can do?
Greetings from Austria,
Paddy